[PATCH] TTY: msm_smd_tty: Remove unused driver
Stephen Boyd
sboyd at codeaurora.org
Fri Apr 10 16:11:05 PDT 2015
This code is no longer used now that mach-msm has been removed.
Delete it.
Cc: David Brown <davidb at codeaurora.org>
Cc: Bryan Huntsman <bryanh at codeaurora.org>
Cc: Daniel Walker <dwalker at fifo99.com>
Signed-off-by: Stephen Boyd <sboyd at codeaurora.org>
---
drivers/tty/serial/Kconfig | 8 --
drivers/tty/serial/Makefile | 1 -
drivers/tty/serial/msm_smd_tty.c | 232 ---------------------------------------
3 files changed, 241 deletions(-)
delete mode 100644 drivers/tty/serial/msm_smd_tty.c
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index f8120c1bde14..3a2bfca6f4b0 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1378,14 +1378,6 @@ config SERIAL_PCH_UART_CONSOLE
(the system console is the device which receives all kernel messages and
warnings and which allows logins in single user mode).
-config SERIAL_MSM_SMD
- bool "Enable tty device interface for some SMD ports"
- default n
- depends on MSM_SMD
- help
- Enables userspace clients to read and write to some streaming SMD
- ports via tty device interface for MSM chipset.
-
config SERIAL_MXS_AUART
depends on ARCH_MXS
tristate "MXS AUART support"
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index c3ac3d930b33..432cb6465227 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -79,7 +79,6 @@ obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o
obj-$(CONFIG_SERIAL_VT8500) += vt8500_serial.o
obj-$(CONFIG_SERIAL_IFX6X60) += ifx6x60.o
obj-$(CONFIG_SERIAL_PCH_UART) += pch_uart.o
-obj-$(CONFIG_SERIAL_MSM_SMD) += msm_smd_tty.o
obj-$(CONFIG_SERIAL_MXS_AUART) += mxs-auart.o
obj-$(CONFIG_SERIAL_LANTIQ) += lantiq.o
obj-$(CONFIG_SERIAL_XILINX_PS_UART) += xilinx_uartps.o
diff --git a/drivers/tty/serial/msm_smd_tty.c b/drivers/tty/serial/msm_smd_tty.c
deleted file mode 100644
index 1238ac370bff..000000000000
--- a/drivers/tty/serial/msm_smd_tty.c
+++ /dev/null
@@ -1,232 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland at google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/cdev.h>
-#include <linux/device.h>
-#include <linux/wait.h>
-
-#include <linux/tty.h>
-#include <linux/tty_driver.h>
-#include <linux/tty_flip.h>
-
-#include <mach/msm_smd.h>
-
-#define MAX_SMD_TTYS 32
-
-struct smd_tty_info {
- struct tty_port port;
- smd_channel_t *ch;
-};
-
-struct smd_tty_channel_desc {
- int id;
- const char *name;
-};
-
-static struct smd_tty_info smd_tty[MAX_SMD_TTYS];
-
-static const struct smd_tty_channel_desc smd_default_tty_channels[] = {
- { .id = 0, .name = "SMD_DS" },
- { .id = 27, .name = "SMD_GPSNMEA" },
-};
-
-static const struct smd_tty_channel_desc *smd_tty_channels =
- smd_default_tty_channels;
-static int smd_tty_channels_len = ARRAY_SIZE(smd_default_tty_channels);
-
-static void smd_tty_notify(void *priv, unsigned event)
-{
- unsigned char *ptr;
- int avail;
- struct smd_tty_info *info = priv;
- struct tty_struct *tty;
-
- if (event != SMD_EVENT_DATA)
- return;
-
- tty = tty_port_tty_get(&info->port);
- if (!tty)
- return;
-
- for (;;) {
- if (test_bit(TTY_THROTTLED, &tty->flags))
- break;
- avail = smd_read_avail(info->ch);
- if (avail == 0)
- break;
-
- avail = tty_prepare_flip_string(&info->port, &ptr, avail);
-
- if (smd_read(info->ch, ptr, avail) != avail) {
- /* shouldn't be possible since we're in interrupt
- ** context here and nobody else could 'steal' our
- ** characters.
- */
- pr_err("OOPS - smd_tty_buffer mismatch?!");
- }
-
- tty_flip_buffer_push(&info->port);
- }
-
- /* XXX only when writable and necessary */
- tty_wakeup(tty);
- tty_kref_put(tty);
-}
-
-static int smd_tty_port_activate(struct tty_port *tport, struct tty_struct *tty)
-{
- struct smd_tty_info *info = container_of(tport, struct smd_tty_info,
- port);
- int i, res = 0;
- const char *name = NULL;
-
- for (i = 0; i < smd_tty_channels_len; i++) {
- if (smd_tty_channels[i].id == tty->index) {
- name = smd_tty_channels[i].name;
- break;
- }
- }
- if (!name)
- return -ENODEV;
-
- if (info->ch)
- smd_kick(info->ch);
- else
- res = smd_open(name, &info->ch, info, smd_tty_notify);
-
- if (!res)
- tty->driver_data = info;
-
- return res;
-}
-
-static void smd_tty_port_shutdown(struct tty_port *tport)
-{
- struct smd_tty_info *info = container_of(tport, struct smd_tty_info,
- port);
-
- if (info->ch) {
- smd_close(info->ch);
- info->ch = 0;
- }
-}
-
-static int smd_tty_open(struct tty_struct *tty, struct file *f)
-{
- struct smd_tty_info *info = smd_tty + tty->index;
-
- return tty_port_open(&info->port, tty, f);
-}
-
-static void smd_tty_close(struct tty_struct *tty, struct file *f)
-{
- struct smd_tty_info *info = tty->driver_data;
-
- tty_port_close(&info->port, tty, f);
-}
-
-static int smd_tty_write(struct tty_struct *tty,
- const unsigned char *buf, int len)
-{
- struct smd_tty_info *info = tty->driver_data;
- int avail;
-
- /* if we're writing to a packet channel we will
- ** never be able to write more data than there
- ** is currently space for
- */
- avail = smd_write_avail(info->ch);
- if (len > avail)
- len = avail;
-
- return smd_write(info->ch, buf, len);
-}
-
-static int smd_tty_write_room(struct tty_struct *tty)
-{
- struct smd_tty_info *info = tty->driver_data;
- return smd_write_avail(info->ch);
-}
-
-static int smd_tty_chars_in_buffer(struct tty_struct *tty)
-{
- struct smd_tty_info *info = tty->driver_data;
- return smd_read_avail(info->ch);
-}
-
-static void smd_tty_unthrottle(struct tty_struct *tty)
-{
- struct smd_tty_info *info = tty->driver_data;
- smd_kick(info->ch);
-}
-
-static const struct tty_port_operations smd_tty_port_ops = {
- .shutdown = smd_tty_port_shutdown,
- .activate = smd_tty_port_activate,
-};
-
-static const struct tty_operations smd_tty_ops = {
- .open = smd_tty_open,
- .close = smd_tty_close,
- .write = smd_tty_write,
- .write_room = smd_tty_write_room,
- .chars_in_buffer = smd_tty_chars_in_buffer,
- .unthrottle = smd_tty_unthrottle,
-};
-
-static struct tty_driver *smd_tty_driver;
-
-static int __init smd_tty_init(void)
-{
- int ret, i;
-
- smd_tty_driver = alloc_tty_driver(MAX_SMD_TTYS);
- if (smd_tty_driver == 0)
- return -ENOMEM;
-
- smd_tty_driver->driver_name = "smd_tty_driver";
- smd_tty_driver->name = "smd";
- smd_tty_driver->major = 0;
- smd_tty_driver->minor_start = 0;
- smd_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
- smd_tty_driver->subtype = SERIAL_TYPE_NORMAL;
- smd_tty_driver->init_termios = tty_std_termios;
- smd_tty_driver->init_termios.c_iflag = 0;
- smd_tty_driver->init_termios.c_oflag = 0;
- smd_tty_driver->init_termios.c_cflag = B38400 | CS8 | CREAD;
- smd_tty_driver->init_termios.c_lflag = 0;
- smd_tty_driver->flags = TTY_DRIVER_RESET_TERMIOS |
- TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
- tty_set_operations(smd_tty_driver, &smd_tty_ops);
-
- ret = tty_register_driver(smd_tty_driver);
- if (ret)
- return ret;
-
- for (i = 0; i < smd_tty_channels_len; i++) {
- struct tty_port *port = &smd_tty[smd_tty_channels[i].id].port;
- tty_port_init(port);
- port->ops = &smd_tty_port_ops;
- tty_port_register_device(port, smd_tty_driver,
- smd_tty_channels[i].id, NULL);
- }
-
- return 0;
-}
-
-module_init(smd_tty_init);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
More information about the linux-arm-kernel
mailing list