[PATCH v3 03/11] ARM: dts: apq8064: Add usb host support.
Srinivas Kandagatla
srinivas.kandagatla at linaro.org
Fri Apr 10 13:43:30 PDT 2015
This patch adds device tree nodes to support two usb hosts on APQ8064
SOC.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
---
arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 22 ++++++++++++++
arch/arm/boot/dts/qcom-apq8064.dtsi | 47 ++++++++++++++++++++++++++++++
2 files changed, 69 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index ca2d7ba..8fe60fc 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -116,6 +116,28 @@
};
};
+ usb3_phy: phy at 12520000 {
+ status = "okay";
+ vddcx-supply = <&pm8921_s3>;
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l23>;
+ };
+
+ usb4_phy: phy at 12530000 {
+ status = "okay";
+ vddcx-supply = <&pm8921_s3>;
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l23>;
+ };
+
+ usb3: usb at 12520000 {
+ status = "okay";
+ };
+
+ usb4: usb at 12530000 {
+ status = "okay";
+ };
+
amba {
/* eMMC */
sdcc1: sdcc at 12400000 {
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 19629c9..99d8e07 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -2,6 +2,7 @@
#include "skeleton.dtsi"
#include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include <dt-bindings/reset/qcom,gcc-msm8960.h>
#include <dt-bindings/clock/qcom,mmcc-msm8960.h>
#include <dt-bindings/soc/qcom,gsbi.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -300,6 +301,52 @@
};
};
+ usb3_phy: phy at 12520000 {
+ compatible = "qcom,usb-otg-ci";
+ reg = <0x12520000 0x400>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
+ status = "disabled";
+ dr_mode = "host";
+
+ clocks = <&gcc USB_HS3_XCVR_CLK>,
+ <&gcc USB_HS3_H_CLK>;
+ clock-names = "core", "iface";
+
+ resets = <&gcc USB_HS3_RESET>;
+ reset-names = "link";
+ };
+
+ usb4_phy: phy at 12530000 {
+ compatible = "qcom,usb-otg-ci";
+ reg = <0x12530000 0x400>;
+ interrupts = <GIC_SPI 215 IRQ_TYPE_NONE>;
+ status = "disabled";
+ dr_mode = "host";
+
+ clocks = <&gcc USB_HS4_XCVR_CLK>,
+ <&gcc USB_HS4_H_CLK>;
+ clock-names = "core", "iface";
+
+ resets = <&gcc USB_HS4_RESET>;
+ reset-names = "link";
+ };
+
+ usb3: usb at 12520000 {
+ compatible = "qcom,ehci-host";
+ reg = <0x12520000 0x400>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
+ status = "disabled";
+ usb-phy = <&usb3_phy>;
+ };
+
+ usb4: usb at 12530000 {
+ compatible = "qcom,ehci-host";
+ reg = <0x12530000 0x400>;
+ interrupts = <GIC_SPI 215 IRQ_TYPE_NONE>;
+ status = "disabled";
+ usb-phy = <&usb4_phy>;
+ };
+
/* Temporary fixed regulator */
vsdcc_fixed: vsdcc-regulator {
compatible = "regulator-fixed";
--
1.9.1
More information about the linux-arm-kernel
mailing list