[PATCH 0/5] PCI: st: provide support for dw pcie

[Gabriel FERNANDEZ]

Changes in v3:
 - Remove power management functions (was not fully tested)
 - Remove configuration space range from dt binding
 - Remove pci_common_init_dev() call in pcie-designware.c to avoid 
   default IO space declaration. 

Changes in v2:
 - comestic corrections in device tree binding
 - add pci-st.c into MAINTAINERS
 - remove st_pcie_ops structure to avoid another level of indirection
 - remove nasty busy-loop
 - remove useless test using virt_to_phys()
 - move disable io support into dw-pcie driver

I don't change the st_pcie_abort_handler() function because abort handling
is masked during boot.


This patch-set introduces a STMicroelectronics PCIe controller.
It's based on designware PCIe driver.

Gabriel Fernandez (5):
  ARM: STi: Kconfig update for PCIe support
  PCI: st: Add Device Tree bindings for sti pcie
  PCI: st: Provide support for the sti PCIe controller
  pci: designware: remove pci_common_init_dev()
  MAINTAINERS: Add pci-st.c to ARCH/STI architecture

 Documentation/devicetree/bindings/pci/st-pcie.txt |  53 ++
 MAINTAINERS                                       |   1 +
 arch/arm/mach-sti/Kconfig                         |   2 +
 drivers/pci/host/Kconfig                          |   9 +
 drivers/pci/host/Makefile                         |   1 +
 drivers/pci/host/pci-st.c                         | 583 ++++++++++++++++++++++
 drivers/pci/host/pcie-designware.c                |  62 +--
 drivers/pci/host/pcie-designware.h                |   2 +
 8 files changed, 683 insertions(+), 30 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pci/st-pcie.txt
 create mode 100644 drivers/pci/host/pci-st.c

-- 
1.9.1