[PATCH v5 02/11] irqchip: nvic: support hierarchy irq domain

[Stefan Agner]

Add support for hierarchy irq domains. This is required to stack
the MSCM interrupt router and the NVIC controller found in Vybrid
SoC.

Signed-off-by: Stefan Agner <stefan at agner.ch>
---
 drivers/irqchip/Kconfig    |  1 +
 drivers/irqchip/irq-nvic.c | 28 +++++++++++++++++++++++++++-
 2 files changed, 28 insertions(+), 1 deletion(-)

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index cc79d2a..ab8de26 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -30,6 +30,7 @@ config ARM_GIC_V3_ITS
 config ARM_NVIC
 	bool
 	select IRQ_DOMAIN
+	select IRQ_DOMAIN_HIERARCHY
 	select GENERIC_IRQ_CHIP
 
 config ARM_VIC
diff --git a/drivers/irqchip/irq-nvic.c b/drivers/irqchip/irq-nvic.c
index 4ff0805..5fac910 100644
--- a/drivers/irqchip/irq-nvic.c
+++ b/drivers/irqchip/irq-nvic.c
@@ -49,6 +49,31 @@ nvic_handle_irq(irq_hw_number_t hwirq, struct pt_regs *regs)
 	handle_IRQ(irq, regs);
 }
 
+static int nvic_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
+				unsigned int nr_irqs, void *arg)
+{
+	int i, ret;
+	irq_hw_number_t hwirq;
+	unsigned int type = IRQ_TYPE_NONE;
+	struct of_phandle_args *irq_data = arg;
+
+	ret = irq_domain_xlate_onecell(domain, irq_data->np, irq_data->args,
+				   irq_data->args_count, &hwirq, &type);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < nr_irqs; i++)
+		irq_map_generic_chip(domain, virq + i, hwirq + i);
+
+	return 0;
+}
+
+static const struct irq_domain_ops nvic_irq_domain_ops = {
+	.xlate = irq_domain_xlate_onecell,
+	.alloc = nvic_irq_domain_alloc,
+	.free = irq_domain_free_irqs_top,
+};
+
 static int __init nvic_of_init(struct device_node *node,
 			       struct device_node *parent)
 {
@@ -70,7 +95,8 @@ static int __init nvic_of_init(struct device_node *node,
 		irqs = NVIC_MAX_IRQ;
 
 	nvic_irq_domain =
-		irq_domain_add_linear(node, irqs, &irq_generic_chip_ops, NULL);
+		irq_domain_add_linear(node, irqs, &nvic_irq_domain_ops, NULL);
+
 	if (!nvic_irq_domain) {
 		pr_warn("Failed to allocate irq domain\n");
 		return -ENOMEM;
-- 
2.3.5