[PATCH v2 2/2] mmc: host: Add some quirks to be read from fdt in sdhci-pltm.c
Suman Tripathi
stripathi at apm.com
Thu Apr 9 09:11:18 PDT 2015
On 30 March 2015 at 16:46, Suman Tripathi <stripathi at apm.com> wrote:
> This patch adds some quirks support to be read from fdt.
>
> Signed-off-by: Suman Tripathi <stripathi at apm.com>
> ---
> drivers/mmc/host/sdhci-pltfm.c | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c
> index bef250e..9f6a4b9 100644
> --- a/drivers/mmc/host/sdhci-pltfm.c
> +++ b/drivers/mmc/host/sdhci-pltfm.c
> @@ -85,6 +85,21 @@ void sdhci_get_of_property(struct platform_device *pdev)
>
> if (of_get_property(np, "broken-cd", NULL))
> host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
> +
> + if (of_get_property(np, "delay-after-power", NULL))
> + host->quirks |= SDHCI_QUIRK_DELAY_AFTER_POWER;
> +
> + if (of_get_property(np, "no-hispd", NULL))
> + host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT;
> +
> + if (of_get_property(np, "broken-adma", NULL))
> + host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
> +
> + if (of_get_property(np, "broken-dma", NULL))
> + host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
> +
> + if (of_get_property(np, "no-cmd23", NULL))
> + host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23;
Can't at least some of these be distinguished from what sdhci variant
that is being used? Instead of having them in DT...
We are using arasan controller in our SOC. So reusing a the existing
sdhci-of-arasan driver. Due to H/W issues we require this quirks. So
for us only option left to pass the info is DTS or ACPI table.
Kind regards
Uffe
On Thu, Apr 9, 2015 at 9:40 PM, Suman Tripathi <stripathi at apm.com> wrote:
> On 30 March 2015 at 16:46, Suman Tripathi <stripathi at apm.com> wrote:
>> This patch adds some quirks support to be read from fdt.
>>
>> Signed-off-by: Suman Tripathi <stripathi at apm.com>
>> ---
>> drivers/mmc/host/sdhci-pltfm.c | 15 +++++++++++++++
>> 1 file changed, 15 insertions(+)
>>
>> diff --git a/drivers/mmc/host/sdhci-pltfm.c
>> b/drivers/mmc/host/sdhci-pltfm.c
>> index bef250e..9f6a4b9 100644
>> --- a/drivers/mmc/host/sdhci-pltfm.c
>> +++ b/drivers/mmc/host/sdhci-pltfm.c
>> @@ -85,6 +85,21 @@ void sdhci_get_of_property(struct platform_device
>> *pdev)
>>
>> if (of_get_property(np, "broken-cd", NULL))
>> host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
>> +
>> + if (of_get_property(np, "delay-after-power", NULL))
>> + host->quirks |= SDHCI_QUIRK_DELAY_AFTER_POWER;
>> +
>> + if (of_get_property(np, "no-hispd", NULL))
>> + host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT;
>> +
>> + if (of_get_property(np, "broken-adma", NULL))
>> + host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
>> +
>> + if (of_get_property(np, "broken-dma", NULL))
>> + host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
>> +
>> + if (of_get_property(np, "no-cmd23", NULL))
>> + host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23;
>
> Can't at least some of these be distinguished from what sdhci variant
> that is being used? Instead of having them in DT...
>
> We are using arasan controller in our SOC. So reusing a the existing
> sdhci-of-arasan driver. Due to H/W issues we require this quirks. So for us
> only option left to pass the info is DTS or ACPI table.
>
> Kind regards
> Uffe
>
> On Wed, Apr 8, 2015 at 3:10 PM, Ulf Hansson <ulf.hansson at linaro.org> wrote:
>>
>> On 30 March 2015 at 16:46, Suman Tripathi <stripathi at apm.com> wrote:
>> > This patch adds some quirks support to be read from fdt.
>> >
>> > Signed-off-by: Suman Tripathi <stripathi at apm.com>
>> > ---
>> > drivers/mmc/host/sdhci-pltfm.c | 15 +++++++++++++++
>> > 1 file changed, 15 insertions(+)
>> >
>> > diff --git a/drivers/mmc/host/sdhci-pltfm.c
>> > b/drivers/mmc/host/sdhci-pltfm.c
>> > index bef250e..9f6a4b9 100644
>> > --- a/drivers/mmc/host/sdhci-pltfm.c
>> > +++ b/drivers/mmc/host/sdhci-pltfm.c
>> > @@ -85,6 +85,21 @@ void sdhci_get_of_property(struct platform_device
>> > *pdev)
>> >
>> > if (of_get_property(np, "broken-cd", NULL))
>> > host->quirks |=
>> > SDHCI_QUIRK_BROKEN_CARD_DETECTION;
>> > +
>> > + if (of_get_property(np, "delay-after-power", NULL))
>> > + host->quirks |= SDHCI_QUIRK_DELAY_AFTER_POWER;
>> > +
>> > + if (of_get_property(np, "no-hispd", NULL))
>> > + host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT;
>> > +
>> > + if (of_get_property(np, "broken-adma", NULL))
>> > + host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
>> > +
>> > + if (of_get_property(np, "broken-dma", NULL))
>> > + host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
>> > +
>> > + if (of_get_property(np, "no-cmd23", NULL))
>> > + host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23;
>>
>> Can't at least some of these be distinguished from what sdhci variant
>> that is being used? Instead of having them in DT...
>>
>> Kind regards
>> Uffe
>>
>> >
>> > if (of_get_property(np, "no-1-8-v", NULL))
>> > host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
>> > --
>> > 1.8.2.1
>> >
>> > --
>> > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
>> > the body of a message to majordomo at vger.kernel.org
>> > More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
>
>
> --
> Thanks,
> with regards,
> Suman Tripathi
--
Thanks,
with regards,
Suman Tripathi
More information about the linux-arm-kernel
mailing list