[PATCH 2/2] arm/dts: Add nodes for flexcan devices present on LS1021A SoC

Bhupesh Sharma bhupesh.sharma at freescale.com
Thu Apr 9 07:51:27 PDT 2015


From: Sakar Arora <Sakar.Arora at freescale.com>

This patch adds the device nodes for flexcan controller(s) present
on LS1021A SoC.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma at freescale.com>
Signed-off-by: Sakar Arora <Sakar.Arora at freescale.com>
---
 arch/arm/boot/dts/ls1021a-qds.dts |    8 ++++++++
 arch/arm/boot/dts/ls1021a.dtsi    |   20 ++++++++++++++++++++
 2 files changed, 28 insertions(+)

diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
index 9c5e16b..1641a04 100644
--- a/arch/arm/boot/dts/ls1021a-qds.dts
+++ b/arch/arm/boot/dts/ls1021a-qds.dts
@@ -238,3 +238,11 @@
 &uart1 {
 	status = "okay";
 };
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index c70bb27..c44661b 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -332,6 +332,26 @@
 			status = "disabled";
 		};
 
+		can0: can at 2a70000 {
+			compatible = "fsl,ls1021a-flexcan";
+			reg = <0x0 0x2a70000 0x0 0x1000>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&platform_clk 1>;
+			clock-frequency = <150000000>;
+			clock-names = "per";
+			little-endian;
+		};
+
+		can1: can at 2a80000 {
+			compatible = "fsl,ls1021a-flexcan";
+			reg = <0x0 0x2a80000 0x0 0x1000>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&platform_clk 1>;
+			clock-frequency = <150000000>;
+			clock-names = "per";
+			little-endian;
+		};
+
 		wdog0: watchdog at 2ad0000 {
 			compatible = "fsl,imx21-wdt";
 			reg = <0x0 0x2ad0000 0x0 0x10000>;
-- 
1.7.9.5





More information about the linux-arm-kernel mailing list