[PATCH 4/7] ARM: cache-v7: optimise branches in v7_flush_cache_louis
Russell King - ARM Linux
linux at arm.linux.org.uk
Thu Apr 9 01:21:16 PDT 2015
On Thu, Apr 09, 2015 at 10:13:06AM +0200, Arnd Bergmann wrote:
> On Friday 03 April 2015 11:54:32 Russell King wrote:
> > diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
> > index 5b5d0c00bca7..793d061b4dce 100644
> > --- a/arch/arm/mm/cache-v7.S
> > +++ b/arch/arm/mm/cache-v7.S
> > @@ -93,17 +93,18 @@ ENTRY(v7_flush_dcache_louis)
> > ALT_SMP(mov r3, r0, lsr #20) @ move LoUIS into position
> > ALT_UP( mov r3, r0, lsr #26) @ move LoUU into position
> > ands r3, r3, #7 << 1 @ extract LoU*2 field from clidr
> > + bne start_flush_levels @ LoU != 0, start flushing
> > #ifdef CONFIG_ARM_ERRATA_643719
> > - ALT_SMP(mrceq p15, 0, r2, c0, c0, 0) @ read main ID register
> > - ALT_UP(reteq lr) @ LoUU is zero, so nothing to do
> > - movweq r1, #:lower16:0x410fc090 @ ID of ARM Cortex A9 r0p?
> > - movteq r1, #:upper16:0x410fc090
> > - biceq r2, r2, #0x0000000f @ clear minor revision number
> > - teqeq r2, r1 @ test for errata affected core and if so...
> > - moveqs r3, #1 << 1 @ fix LoUIS value (and set flags state to 'ne')
> > +ALT_SMP(mrc p15, 0, r2, c0, c0, 0) @ read main ID register
> > +ALT_UP( ret lr) @ LoUU is zero, so nothing to do
> > + movw r1, #:lower16:0x410fc090 @ ID of ARM Cortex A9 r0p?
>
> With this in linux-next, I get a build failure on randconfig kernels with
> THUMB2_KERNEL enabled:
>
> arch/arm/mm/cache-v7.S: Assembler messages:
> arch/arm/mm/cache-v7.S:99: Error: ALT_UP() content must assemble to exactly 4 bytes
>
> Any idea for a method that will work with all combinations of SMP/UP
> and ARM/THUMB? The best I could come up with was to add an extra 'mov r0,r0',
> but that gets rather ugly as you then have to do it only for THUMB2.
How about we make ALT_UP() add the additional padding? Something like
this maybe?
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index f67fd3afebdf..79f421796aab 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -237,6 +237,9 @@
.pushsection ".alt.smp.init", "a" ;\
.long 9998b ;\
9997: instr ;\
+ .if . - 9997b == 2 ;\
+ nop ;\
+ .endif
.if . - 9997b != 4 ;\
.error "ALT_UP() content must assemble to exactly 4 bytes";\
.endif ;\
--
FTTC broadband for 0.8mile line: currently at 10.5Mbps down 400kbps up
according to speedtest.net.
More information about the linux-arm-kernel
mailing list