[PATCH 2/2] ARM: at91/dt: add support for kizboxmini.

[g.portay at overkiz.com]

On 2015-04-07 21:32, Alexandre Belloni wrote:
> Hi,
> 
> On 07/04/2015 at 16:11:24 +0200, Gaël PORTAY wrote :
>> Add DT file for Kizbox mini board.
>> This board is based on Atmel's AT91SAM9G25 SoC.
>> 
>> Signed-off-by: Gaël PORTAY <g.portay at overkiz.com>
>> ---
>>  arch/arm/boot/dts/Makefile            |   1 +
>>  arch/arm/boot/dts/at91-kizboxmini.dts | 129 
>> ++++++++++++++++++++++++++++++++++
>>  2 files changed, 130 insertions(+)
>>  create mode 100644 arch/arm/boot/dts/at91-kizboxmini.dts
>> 
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index a1c776b..9c11888 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -30,6 +30,7 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \
>>  	at91sam9rlek.dtb \
>>  	at91-ariag25.dtb \
>>  	at91-cosino_mega2560.dtb \
>> +	at91-kizboxmini.dtb \
>>  	at91sam9g15ek.dtb \
>>  	at91sam9g25ek.dtb \
>>  	at91sam9g35ek.dtb \
>> diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts 
>> b/arch/arm/boot/dts/at91-kizboxmini.dts
>> new file mode 100644
>> index 0000000..191576c
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/at91-kizboxmini.dts
>> @@ -0,0 +1,129 @@
>> +/*
>> + * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini 
>> board
>> + *
>> + * Copyright (C) 2014 Gaël PORTAY <g.portay at overkiz.com>
>> + *
>> + * Licensed under GPLv2 or later.
>> + */
>> +/dts-v1/;
>> +#include "at91sam9g25.dtsi"
>> +#include "at91sam9x5.dtsi"
>> +#include <dt-bindings/pwm/pwm.h>
>> +
>> +/ {
>> +	model = "Overkiz Kizbox mini";
>> +	compatible = "overkiz,kizboxmini", "atmel,at91sam9g25ek", 
>> "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
> 
> I would remove "atmel,at91sam9g25ek" and "atmel,at91sam9x5ek". However,
> you could use "atmel,at91sam9g25".

I guess your right...