[PATCH] tty: serial: Add const to struct uart_ops declarations

[Stefan Agner]

Hi Joe,

See comment below...

On 2015-04-04 19:47, Joe Perches wrote:
> These structs can be const, so make them const.
> 
> Signed-off-by: Joe Perches <joe at perches.com>
> ---
> 
> Done with:
> sed -r -i -e 's/\bstruct\s+uart_ops\s+(\w+)\s*=\s*/const struct
> uart_ops \1 = /g' drivers/tty/serial/*.c
> 
> Compiled x86 only, not cross-compiled.  Untested.
> 
>  drivers/tty/serial/21285.c                  | 2 +-
>  drivers/tty/serial/altera_jtaguart.c        | 2 +-
>  drivers/tty/serial/altera_uart.c            | 2 +-
>  drivers/tty/serial/amba-pl010.c             | 2 +-
>  drivers/tty/serial/amba-pl011.c             | 2 +-
>  drivers/tty/serial/apbuart.c                | 2 +-
>  drivers/tty/serial/ar933x_uart.c            | 2 +-
>  drivers/tty/serial/arc_uart.c               | 2 +-
>  drivers/tty/serial/atmel_serial.c           | 2 +-
>  drivers/tty/serial/bcm63xx_uart.c           | 2 +-
>  drivers/tty/serial/bfin_sport_uart.c        | 2 +-
>  drivers/tty/serial/bfin_uart.c              | 2 +-
>  drivers/tty/serial/cpm_uart/cpm_uart_core.c | 2 +-
>  drivers/tty/serial/dz.c                     | 2 +-
>  drivers/tty/serial/efm32-uart.c             | 2 +-
>  drivers/tty/serial/fsl_lpuart.c             | 4 ++--
>  drivers/tty/serial/icom.c                   | 2 +-
>  drivers/tty/serial/imx.c                    | 2 +-
>  drivers/tty/serial/ioc3_serial.c            | 2 +-
>  drivers/tty/serial/ioc4_serial.c            | 2 +-
>  drivers/tty/serial/ip22zilog.c              | 2 +-
>  drivers/tty/serial/jsm/jsm_tty.c            | 2 +-
>  drivers/tty/serial/lantiq.c                 | 2 +-
>  drivers/tty/serial/lpc32xx_hs.c             | 2 +-
>  drivers/tty/serial/m32r_sio.c               | 2 +-
>  drivers/tty/serial/max3100.c                | 2 +-
>  drivers/tty/serial/men_z135_uart.c          | 2 +-
>  drivers/tty/serial/meson_uart.c             | 2 +-
>  drivers/tty/serial/mpc52xx_uart.c           | 2 +-
>  drivers/tty/serial/mpsc.c                   | 2 +-
>  drivers/tty/serial/msm_serial.c             | 2 +-
>  drivers/tty/serial/mux.c                    | 2 +-
>  drivers/tty/serial/mxs-auart.c              | 2 +-
>  drivers/tty/serial/netx-serial.c            | 2 +-
>  drivers/tty/serial/nwpserial.c              | 2 +-
>  drivers/tty/serial/omap-serial.c            | 2 +-
>  drivers/tty/serial/pch_uart.c               | 2 +-
>  drivers/tty/serial/pmac_zilog.c             | 2 +-
>  drivers/tty/serial/pnx8xxx_uart.c           | 2 +-
>  drivers/tty/serial/pxa.c                    | 2 +-
>  drivers/tty/serial/sa1100.c                 | 2 +-
>  drivers/tty/serial/samsung.c                | 2 +-
>  drivers/tty/serial/serial-tegra.c           | 2 +-
>  drivers/tty/serial/serial_ks8695.c          | 2 +-
>  drivers/tty/serial/serial_txx9.c            | 2 +-
>  drivers/tty/serial/sh-sci.c                 | 2 +-
>  drivers/tty/serial/sirfsoc_uart.c           | 2 +-
>  drivers/tty/serial/sn_console.c             | 2 +-
>  drivers/tty/serial/sprd_serial.c            | 2 +-
>  drivers/tty/serial/st-asc.c                 | 2 +-
>  drivers/tty/serial/sunhv.c                  | 2 +-
>  drivers/tty/serial/sunsab.c                 | 2 +-
>  drivers/tty/serial/sunsu.c                  | 2 +-
>  drivers/tty/serial/sunzilog.c               | 2 +-
>  drivers/tty/serial/timbuart.c               | 2 +-
>  drivers/tty/serial/uartlite.c               | 2 +-
>  drivers/tty/serial/ucc_uart.c               | 2 +-
>  drivers/tty/serial/vr41xx_siu.c             | 2 +-
>  drivers/tty/serial/vt8500_serial.c          | 2 +-
>  drivers/tty/serial/xilinx_uartps.c          | 2 +-
>  drivers/tty/serial/zs.c                     | 2 +-
>  61 files changed, 62 insertions(+), 62 deletions(-)
> 

<snip>

> --- a/drivers/tty/serial/efm32-uart.c
> +++ b/drivers/tty/serial/efm32-uart.c
> @@ -487,7 +487,7 @@ static int efm32_uart_verify_port(struct uart_port *port,
>  	return ret;
>  }
>  
> -static struct uart_ops efm32_uart_pops = {
> +static const struct uart_ops efm32_uart_pops = {
>  	.tx_empty = efm32_uart_tx_empty,
>  	.set_mctrl = efm32_uart_set_mctrl,
>  	.get_mctrl = efm32_uart_get_mctrl,
> diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
> index 08ce76f..738b5c4 100644
> --- a/drivers/tty/serial/fsl_lpuart.c
> +++ b/drivers/tty/serial/fsl_lpuart.c
> @@ -1494,7 +1494,7 @@ static int lpuart_verify_port(struct uart_port
> *port, struct serial_struct *ser)
>  	return ret;
>  }
>  
> -static struct uart_ops lpuart_pops = {
> +static const const struct uart_ops lpuart_pops = {

Something went wrong in this driver, const is twice...

Probably because we have two struct uart_ops in one driver?

>  	.tx_empty	= lpuart_tx_empty,
>  	.set_mctrl	= lpuart_set_mctrl,
>  	.get_mctrl	= lpuart_get_mctrl,
> @@ -1513,7 +1513,7 @@ static struct uart_ops lpuart_pops = {
>  	.flush_buffer	= lpuart_flush_buffer,
>  };
>  
> -static struct uart_ops lpuart32_pops = {
> +static const const struct uart_ops lpuart32_pops = {
>  	.tx_empty	= lpuart32_tx_empty,
>  	.set_mctrl	= lpuart32_set_mctrl,
>  	.get_mctrl	= lpuart32_get_mctrl,
> diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c
> index 45fc323..3915443 100644
> --- a/drivers/tty/serial/icom.c
> +++ b/drivers/tty/serial/icom.c
> @@ -1287,7 +1287,7 @@ static void icom_config_port(struct uart_port
> *port, int flags)
>  	port->type = PORT_ICOM;
>  }
>  

<snip>

--
Stefan