[PATCH 1/2] ARM: dts: sun7i: Add dts file for the Orangepi SBC
Hans de Goede
hdegoede at redhat.com
Sat Apr 4 06:00:10 PDT 2015
Hi,
On 04-04-15 14:47, Maxime Ripard wrote:
> Hi Hans,
>
> On Sat, Apr 04, 2015 at 10:59:53AM +0200, Hans de Goede wrote:
>> The Orangepi is a development board using the Allwinner A20 SoC, with 1G RAM,
>> microsd slot, HDMI, 1Gbit ethernet, USB wifi, Micro USB (otg), sata, 4 USB A
>> ports, ir receiver and a headphones jack.
>>
>> Also see:
>> http://linux-sunxi.org/Xunlong_Orange_Pi
>> http://www.orangepi.org/
>>
>> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
>> ---
>> arch/arm/boot/dts/Makefile | 1 +
>> arch/arm/boot/dts/sun7i-a20-orangepi.dts | 229 +++++++++++++++++++++++++++++++
>> 2 files changed, 230 insertions(+)
>> create mode 100644 arch/arm/boot/dts/sun7i-a20-orangepi.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 2426f0a..d9b609d 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -551,6 +551,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
>> sun7i-a20-olinuxino-lime.dtb \
>> sun7i-a20-olinuxino-lime2.dtb \
>> sun7i-a20-olinuxino-micro.dtb \
>> + sun7i-a20-orangepi.dtb \
>> sun7i-a20-pcduino3.dtb \
>> sun7i-a20-pcduino3-nano.dtb \
>> sun7i-a20-wexler-tab7200.dtb
>> diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/sun7i-a20-orangepi.dts
>> new file mode 100644
>> index 0000000..2ef79b7
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/sun7i-a20-orangepi.dts
>> @@ -0,0 +1,229 @@
>> +/*
>> + * Copyright 2015 Hans de Goede <hdegoede at redhat.com>
>> + *
>> + * Hans de Goede <hdegoede at redhat.com>
>> + *
>> + * This file is dual-licensed: you can use it either under the terms
>> + * of the GPL or the X11 license, at your option. Note that this dual
>> + * licensing only applies to this file, and not this project as a
>> + * whole.
>> + *
>> + * a) This file is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of the
>> + * License, or (at your option) any later version.
>> + *
>> + * This file is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public
>> + * License along with this file; if not, write to the Free
>> + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
>> + * MA 02110-1301 USA
>> + *
>> + * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated documentation
>> + * files (the "Software"), to deal in the Software without
>> + * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following
>> + * conditions:
>> + *
>> + * The above copyright notice and this permission notice shall be
>> + * included in all copies or substantial portions of the Software.
>> + *
>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> + */
>> +
>> +/dts-v1/;
>> +#include "sun7i-a20.dtsi"
>> +#include "sunxi-common-regulators.dtsi"
>> +
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/pinctrl/sun4i-a10.h>
>> +
>> +/ {
>> + model = "Orange Pi";
>> + compatible = "xunlong,orangepi", "allwinner,sun7i-a20";
>> +
>> + aliases {
>> + serial0 = &uart0;
>> + };
>
> This should have a matching /chosen/stdout-path property.
>
> The rest of the patch is fine, I can apply it and add the property, if
> that's ok for you.
Yes that ok with me.
Thanks,
Hans
More information about the linux-arm-kernel
mailing list