[PATCH 02/13] tty: serial: 8250: make serial8250_console_setup() non _init

[Peter Hurley]

On 09/29/2014 02:06 PM, Sebastian Andrzej Siewior wrote:
> if I boot with console=ttyS0 and the omap driver is module I end up with
> 
> | console [ttyS0] disabled

Note to self: make ISA config optional.

> | omap8250 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a 8250
> | Unable to handle kernel paging request at virtual address c07a9de0
> | Modules linked in: 8250_omap(+)
> | CPU: 0 PID: 908 Comm: modprobe Not tainted 3.17.0-rc5+ #1593
> | PC is at serial8250_console_setup+0x0/0xc8
> | LR is at register_console+0x13c/0x3a4
> | [<c0078788>] (register_console) from [<c02d0340>] (uart_add_one_port+0x3cc/0x420)
> | [<c02d0340>] (uart_add_one_port) from [<c02d38a4>] (serial8250_register_8250_port+0x298/0x39c)
> | [<c02d38a4>] (serial8250_register_8250_port) from [<bf006274>] (omap8250_probe+0x218/0x3dc [8250_omap])
> | [<bf006274>] (omap8250_probe [8250_omap]) from [<c02e3424>] (platform_drv_probe+0x2c/0x5c)
> | [<c02e3424>] (platform_drv_probe) from [<c02e1eac>] (driver_probe_device+0x104/0x228)
> …
> | [<c009fa48>] (SyS_init_module) from [<c000e6e0>] (ret_fast_syscall+0x0/0x30)
> | Code: 7823603b f8314620 051b3013 491ed416 (44792204)
> 
> because serial8250_console_setup() is already gone.
> 
> Signed-off-by: Sebastian Andrzej Siewior <bigeasy at linutronix.de>

Reviewed-by: Peter Hurley <peter at hurleysoftware.com>