[PATCH v7 5/7] qcom: cpuidle: Add cpuidle driver for QCOM cpus

[Kevin Hilman]

On Tue, Sep 30, 2014 at 10:51 AM, Nicolas Pitre
<nicolas.pitre at linaro.org> wrote:
> On Tue, 30 Sep 2014, Kevin Hilman wrote:
>
>> Lorenzo Pieralisi <lorenzo.pieralisi at arm.com> writes:
>>
>> > Hi Lina,
>> >
>> > On Sat, Sep 27, 2014 at 01:58:13AM +0100, Lina Iyer wrote:
>> >> Add cpuidle driver interface to allow cpus to go into C-States. Use the
>> >> cpuidle DT interface common across ARM architectures to provide the
>> >> C-State information to the cpuidle framework.
>> >>
>> >> Supported modes at this time are clock gating (wfi) and cpu power down
>> >> (Standalone PC or spc).
>> >>
>> >> Signed-off-by: Lina Iyer <lina.iyer at linaro.org>
>> >> ---
>> >>  .../bindings/arm/msm/qcom,idle-state.txt           | 72 +++++++++++++++++
>> >>  drivers/cpuidle/Kconfig.arm                        |  7 ++
>> >>  drivers/cpuidle/Makefile                           |  1 +
>> >>  drivers/cpuidle/cpuidle-qcom.c                     | 89 ++++++++++++++++++++++
>> >>  4 files changed, 169 insertions(+)
>> >>  create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt
>> >>  create mode 100644 drivers/cpuidle/cpuidle-qcom.c
>> >>
>> >> diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt b/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt
>> >> new file mode 100644
>> >> index 0000000..47095b9
>> >> --- /dev/null
>> >> +++ b/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt
>> >> @@ -0,0 +1,72 @@
>> >> +QCOM Idle States for cpuidle driver
>> >> +
>> >> +ARM provides idle-state node to define the cpuidle states, as defined in [1].
>> >> +cpuidle-qcom is the cpuidle driver for Qualcomm SoCs and uses these idle
>> >> +states. Idle states have different enter/exit latency and residency values.
>> >> +The idle states supported by the QCOM SoC are defined as -
>> >> +
>> >> +    * WFI
>> >> +    * Retention
>> >> +    * Standalone Power Collapse (Standalone PC or SPC)
>> >> +    * Power Collapse (PC)
>> >> +
>> >> +WFI: WFI does a little more in addition to architectural clock gating.  ARM
>> >
>> > This may be misleading. Call it PlatformWFI or something like that, not WFI if
>> > that's not what it is.
>>
>> This gets at a little pet peeve of mine:
>>
>> IMO, naming any state with "WFI" is a bit confusing, because typically
>> *every* idle state is entered by one (or more) CPU executing WFI, no?
>
> Agreed.
>
> The only state called "WFI" should be the one that only executes the WFI
> instruction without any other hardware setup around it.

Well, I would go even further in that none of the states should be
called WFI, because WFI is used to enter all of them.

Kevin