[PATCH v7 5/7] qcom: cpuidle: Add cpuidle driver for QCOM cpus

[Kevin Hilman]

Lorenzo Pieralisi <lorenzo.pieralisi at arm.com> writes:

> Hi Lina,
>
> On Sat, Sep 27, 2014 at 01:58:13AM +0100, Lina Iyer wrote:
>> Add cpuidle driver interface to allow cpus to go into C-States. Use the
>> cpuidle DT interface common across ARM architectures to provide the
>> C-State information to the cpuidle framework.
>> 
>> Supported modes at this time are clock gating (wfi) and cpu power down
>> (Standalone PC or spc).
>> 
>> Signed-off-by: Lina Iyer <lina.iyer at linaro.org>
>> ---
>>  .../bindings/arm/msm/qcom,idle-state.txt           | 72 +++++++++++++++++
>>  drivers/cpuidle/Kconfig.arm                        |  7 ++
>>  drivers/cpuidle/Makefile                           |  1 +
>>  drivers/cpuidle/cpuidle-qcom.c                     | 89 ++++++++++++++++++++++
>>  4 files changed, 169 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt
>>  create mode 100644 drivers/cpuidle/cpuidle-qcom.c
>> 
>> diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt b/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt
>> new file mode 100644
>> index 0000000..47095b9
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt
>> @@ -0,0 +1,72 @@
>> +QCOM Idle States for cpuidle driver
>> +
>> +ARM provides idle-state node to define the cpuidle states, as defined in [1].
>> +cpuidle-qcom is the cpuidle driver for Qualcomm SoCs and uses these idle
>> +states. Idle states have different enter/exit latency and residency values.
>> +The idle states supported by the QCOM SoC are defined as -
>> +
>> +    * WFI
>> +    * Retention
>> +    * Standalone Power Collapse (Standalone PC or SPC)
>> +    * Power Collapse (PC)
>> +
>> +WFI: WFI does a little more in addition to architectural clock gating.  ARM
>
> This may be misleading. Call it PlatformWFI or something like that, not WFI if
> that's not what it is.

This gets at a little pet peeve of mine: 

IMO, naming any state with "WFI" is a bit confusing, because typically
*every* idle state is entered by one (or more) CPU executing WFI, no?

Kevin