[PATCH v6 05/11] drm: add Atmel HLCDC Display Controller support

[Boris BREZILLON]

On Mon, 29 Sep 2014 16:44:18 +0200
Boris Brezillon <boris.brezillon at free-electrons.com> wrote:

> From: Boris BREZILLON <boris.brezillon at free-electrons.com>
> 
> The Atmel HLCDC (HLCD Controller) IP available on some Atmel SoCs (i.e.
> at91sam9n12, at91sam9x5 family or sama5d3 family) provides a display
> controller device.
> 
> This display controller supports at least one primary plane and might
> provide several overlays and an hardware cursor depending on the IP
> version.
> 
> At the moment, this driver only implements an RGB connector to interface
> with LCD panels, but support for other kind of external devices might be
> added later.
> 
> Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>
> Reviewed-by: Rob Clark <robdclark at gmail.com>
> Tested-by: Anthony Harivel <anthony.harivel at emtrion.de>
> Tested-by: Ludovic Desroches <ludovic.desroches at atmel.com>
> ---
>  drivers/gpu/drm/Kconfig                          |   2 +
>  drivers/gpu/drm/Makefile                         |   1 +
>  drivers/gpu/drm/atmel-hlcdc/Kconfig              |  13 +
>  drivers/gpu/drm/atmel-hlcdc/Makefile             |   7 +
>  drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c   | 392 +++++++++++
>  drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c     | 527 ++++++++++++++
>  drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h     | 216 ++++++
>  drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.c  | 659 ++++++++++++++++++
>  drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.h  | 403 +++++++++++
>  drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c | 443 ++++++++++++
>  drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c  | 833 +++++++++++++++++++++++
>  11 files changed, 3496 insertions(+)
>  create mode 100644 drivers/gpu/drm/atmel-hlcdc/Kconfig
>  create mode 100644 drivers/gpu/drm/atmel-hlcdc/Makefile
>  create mode 100644 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
>  create mode 100644 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
>  create mode 100644 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
>  create mode 100644 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.c
>  create mode 100644 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.h
>  create mode 100644 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c
>  create mode 100644 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
> 
> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> index b066bb3..2d97f7e 100644
> --- a/drivers/gpu/drm/Kconfig
> +++ b/drivers/gpu/drm/Kconfig
> @@ -185,6 +185,8 @@ source "drivers/gpu/drm/cirrus/Kconfig"
>  

[...]

> +
> +int atmel_hlcdc_crtc_mode_valid(struct drm_crtc *c,
> +				struct drm_display_mode *mode)
> +{
> +	struct videomode vm;
> +
> +	vm.vfront_porch = mode->vsync_start - mode->vdisplay;
> +	vm.vback_porch = mode->vtotal - mode->vsync_end;
> +	vm.vsync_len = mode->vsync_end - mode->vsync_start;
> +	vm.hfront_porch = mode->hsync_start - mode->hdisplay;
> +	vm.hback_porch = mode->htotal - mode->hsync_end;
> +	vm.hsync_len = mode->hsync_end - mode->hsync_start;
> +
> +	if (vm.hsync_len > 0x40 || vm.hsync_len < 1)
> +		return MODE_HSYNC;
> +
> +	if (vm.vsync_len > 0x40 || vm.vsync_len < 1)
> +		return MODE_VSYNC;
> +
> +	if (vm.vfront_porch > 0x40 || vm.hfront_porch < 1 ||
> +	    vm.vback_porch > 0x40 || vm.vback_porch < 0 ||
> +	    mode->hdisplay > 2048 || mode->hdisplay < 1)
> +		return MODE_H_ILLEGAL;
> +
> +	if (vm.hfront_porch > 0x200 || vm.hfront_porch < 1 ||
> +	    vm.hback_porch > 0x200 || vm.hback_porch < 1 ||
> +	    mode->hdisplay > 2048 || mode->hdisplay < 1)
> +		return MODE_V_ILLEGAL;
> +
> +	return MODE_OK;
> +}
> +

I forgot to squash the commit removing this function which a vestige
from one of my attempt to provide a common mode_valid function that can
be called from the connector mode_valid function.

-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com