[RFC PATCH 2/4] ARM: keystone: pm: switch to use generic pm domains

[Grygorii Strashko]

On 09/26/2014 01:23 AM, Kevin Hilman wrote:
> Grygorii Strashko <grygorii.strashko at ti.com> writes:
>
>> This patch switches Keystone 2 PM code to use Generic PM domains
>> instead of PM  clock domains because of the lack of DT support
>> for the last.
>>
>> Keystone 2 PM domain should be specified per device for which
>> Runtime PM has to be enabled and handles the list of functional clocks
>> to enable/disable device.
>>
>> Example:
>>   qmss_domain: qmss_pm_controller {
>> 	compatible = "ti,keystone-pm-controller";
>> 	clocks = <&chipclk13>;
>> 	#power-domain-cells = <0>;
>>   };
>>
>>   qmss: qmss at 2a40000 {
>> 	compatible = "ti,keystone-navigator-qmss";
>> 	...
>> 	power-domains = <&qmss_domain>;
>>
>> Signed-off-by: Grygorii Strashko <grygorii.strashko at ti.com>
>
> [...]
>
>> +static int keystone_pm_domain_power_off(struct generic_pm_domain *genpd)
>> +{
>> +	int ret;
>> +	struct keystone_domain *dm = container_of(genpd,
>> +						  struct keystone_domain,
>> +						  base);
>> +
>> +	/* Enable reset clocks for all devices in the PU domain */
>
> This says enable clocks...
>
>> +	ret = pm_clk_suspend(dm->dev);
>
> ...but this calls clk_disable().
>
>> +	if (ret)
>> +		dev_err(dm->dev, "can't turn off clocks %d\n", ret);
>> +
>> +	return ret;
>> +}
>> +
>> +static int keystone_pm_domain_power_on(struct generic_pm_domain *genpd)
>> +{
>> +	int ret;
>> +	struct keystone_domain *dm = container_of(genpd,
>> +						  struct keystone_domain,
>> +						  base);
>> +
>> +	/* Disable reset clocks for all devices in the PU domain */
>
> And this says disable clocks...
>
>> +	ret = pm_clk_resume(dm->dev);
>
> ...but this calls clk_enable().
>
> -ECONFUSED.
>

Will update.

Thanks you for comments.

Regards,
-grygorii