[PATCH v5 3/4] ARM: tegra: Add thermal trip points for Jetson TK1

[Eduardo Valentin]

Hello Mikko,

On Thu, Aug 21, 2014 at 01:17:21PM +0300, Mikko Perttunen wrote:
> This adds critical trip points to the Jetson TK1 device tree.
> The device will do a controlled shutdown when either the CPU, GPU
> or MEM thermal zone reaches 101 degrees Celsius.
> 
> Signed-off-by: Mikko Perttunen <mperttunen at nvidia.com>
> ---
> v5: added cooling-maps nodes
> 

OK. But no cooling map entry in it. What was the reason again you don't
need/want to add the maps?

>  arch/arm/boot/dts/tegra124-jetson-tk1.dts | 41 +++++++++++++++++++++++++++++++
>  1 file changed, 41 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
> index 0cdb5cf..bcdab7f 100644
> --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
> +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
> @@ -1876,4 +1876,45 @@
>  			 <&tegra_car TEGRA124_CLK_EXTERN1>;
>  		clock-names = "pll_a", "pll_a_out0", "mclk";
>  	};
> +
> +	thermal-zones {
> +		cpu {
> +			trips {
> +				trip at 0 {
> +					temperature = <101000>;
> +					hysteresis = <0>;
> +					type = "critical";
> +				};
> +			};
> +
> +			cooling-maps {
> +			};
> +		};
> +
> +		mem {
> +			trips {
> +				trip at 0 {
> +					temperature = <101000>;
> +					hysteresis = <0>;
> +					type = "critical";
> +				};
> +			};
> +
> +			cooling-maps {
> +			};
> +		};
> +
> +		gpu {
> +			trips {
> +				trip at 0 {
> +					temperature = <101000>;
> +					hysteresis = <0>;
> +					type = "critical";
> +				};
> +			};
> +
> +			cooling-maps {
> +			};
> +		};
> +	};
>  };
> -- 
> 1.8.1.5
>