[PATCH v7 1/3] mfd: devicetree: bindings: Add Qualcomm RPM DT binding

[Bjorn Andersson]

On Wed 24 Sep 01:22 PDT 2014, Lee Jones wrote:

> On Mon, 22 Sep 2014, Bjorn Andersson wrote:
> 
> > Add binding for the Qualcomm Resource Power Manager (RPM) found in 8660,
> > 8960 and 8064 based devices. The binding currently describes the rpm
> > itself and the regulator subnodes.
> > 
> > Signed-off-by: Bjorn Andersson <bjorn.andersson at sonymobile.com>
> > ---
> >  Documentation/devicetree/bindings/mfd/qcom-rpm.txt |  246 ++++++++++++++++++++
> 
> Please adhere to: Documentation/devicetree/bindings/submitting-patches.txt
> 

I assume you mean this part:

  1) The Documentation/ portion of the patch should be a separate patch.

But I doubt this document was written with include/dt-bindings in mind, because
in my eyes they are part of "device tree bindings".

> >  include/dt-bindings/mfd/qcom-rpm.h                 |  154 ++++++++++++
> >  2 files changed, 400 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/mfd/qcom-rpm.txt
> >  create mode 100644 include/dt-bindings/mfd/qcom-rpm.h
> > 
> > diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
> > new file mode 100644
> > index 0000000..4264021
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
> 
> This requires a DT Ack.
> 
> [...]
> 
> > +++ b/include/dt-bindings/mfd/qcom-rpm.h
> 
> Please split this into a separate patch.
> 

But this is part of the device tree binding and the binding "depends" on it.

> When you do, for this file only, please apply my:
> 
>   Acked-by: Lee Jones <lee.jones at linaro.org>
> 

Thanks,
Bjorn