[PATCHv2] clk: ti: change clock init to use generic of_clk_init
Tony Lindgren
tony at atomide.com
Tue Sep 23 08:49:02 PDT 2014
* Tero Kristo <t-kristo at ti.com> [140912 05:02]:
> Previously, the TI clock driver initialized all the clocks hierarchically
> under each separate clock provider node. Now, each clock that requires
> IO access will instead check their parent node to find out which IO range
> to use.
>
> This patch allows the TI clock driver to use a few new features provided
> by the generic of_clk_init, and also allows registration of clock nodes
> outside the clock hierarchy (for example, any external clocks.)
>
> Signed-off-by: Tero Kristo <t-kristo at ti.com>
> Cc: Mike Turquette <mturquette at linaro.org>
> Cc: Paul Walmsley <paul at pwsan.com>
> Cc: Tony Lindgren <tony at atomide.com>
> Cc: Mark Rutland <mark.rutland at arm.com>
> Cc: Peter Ujfalusi <peter.ujfalusi at ti.com>
> Cc: Jyri Sarha <jsarha at ti.com>
> Cc: Stefan Assmann <sassmann at kpanic.de>
> ---
> Changes from v1:
> - fixed the retry logic for deferred clock inits, this wasn't working
> properly in v1
Sounds like you want to merge this via the clock tree, so please
feel free to add:
Acked-by: Tony Lindgren <tony at atomide.com>
> arch/arm/mach-omap2/io.c | 12 +++++--
> arch/arm/mach-omap2/prm_common.c | 2 --
> drivers/clk/ti/clk.c | 68 ++++++++++++++++++++++++--------------
> include/linux/clk/ti.h | 1 +
> 4 files changed, 54 insertions(+), 29 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
> index 5d0667c..a1b82a9 100644
> --- a/arch/arm/mach-omap2/io.c
> +++ b/arch/arm/mach-omap2/io.c
> @@ -734,8 +734,16 @@ int __init omap_clk_init(void)
> ti_clk_init_features();
>
> ret = of_prcm_init();
> - if (!ret)
> - ret = omap_clk_soc_init();
> + if (ret)
> + return ret;
> +
> + of_clk_init(NULL);
> +
> + ti_dt_clk_init_retry_clks();
> +
> + ti_dt_clockdomains_setup();
> +
> + ret = omap_clk_soc_init();
>
> return ret;
> }
> diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
> index 76ca320..3b89080 100644
> --- a/arch/arm/mach-omap2/prm_common.c
> +++ b/arch/arm/mach-omap2/prm_common.c
> @@ -525,8 +525,6 @@ int __init of_prcm_init(void)
> memmap_index++;
> }
>
> - ti_dt_clockdomains_setup();
> -
> return 0;
> }
>
> diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
> index b1a6f71..337abe5 100644
> --- a/drivers/clk/ti/clk.c
> +++ b/drivers/clk/ti/clk.c
> @@ -25,8 +25,8 @@
> #undef pr_fmt
> #define pr_fmt(fmt) "%s: " fmt, __func__
>
> -static int ti_dt_clk_memmap_index;
> struct ti_clk_ll_ops *ti_clk_ll_ops;
> +static struct device_node *clocks_node_ptr[CLK_MAX_MEMMAPS];
>
> /**
> * ti_dt_clocks_register - register DT alias clocks during boot
> @@ -108,9 +108,21 @@ void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index)
> struct clk_omap_reg *reg;
> u32 val;
> u32 tmp;
> + int i;
>
> reg = (struct clk_omap_reg *)&tmp;
> - reg->index = ti_dt_clk_memmap_index;
> +
> + for (i = 0; i < CLK_MAX_MEMMAPS; i++) {
> + if (clocks_node_ptr[i] == node->parent)
> + break;
> + }
> +
> + if (i == CLK_MAX_MEMMAPS) {
> + pr_err("clk-provider not found for %s!\n", node->name);
> + return NULL;
> + }
> +
> + reg->index = i;
>
> if (of_property_read_u32_index(node, "reg", index, &val)) {
> pr_err("%s must have reg[%d]!\n", node->name, index);
> @@ -127,20 +139,14 @@ void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index)
> * @parent: master node
> * @index: internal index for clk_reg_ops
> *
> - * Initializes a master clock IP block and its child clock nodes.
> - * Regmap is provided for accessing the register space for the
> - * IP block and all the clocks under it.
> + * Initializes a master clock IP block. This basically sets up the
> + * mapping from clocks node to the memory map index. All the clocks
> + * are then initialized through the common of_clk_init call, and the
> + * clocks will access their memory maps based on the node layout.
> */
> void ti_dt_clk_init_provider(struct device_node *parent, int index)
> {
> - const struct of_device_id *match;
> - struct device_node *np;
> struct device_node *clocks;
> - of_clk_init_cb_t clk_init_cb;
> - struct clk_init_item *retry;
> - struct clk_init_item *tmp;
> -
> - ti_dt_clk_memmap_index = index;
>
> /* get clocks for this parent */
> clocks = of_get_child_by_name(parent, "clocks");
> @@ -149,19 +155,31 @@ void ti_dt_clk_init_provider(struct device_node *parent, int index)
> return;
> }
>
> - for_each_child_of_node(clocks, np) {
> - match = of_match_node(&__clk_of_table, np);
> - if (!match)
> - continue;
> - clk_init_cb = (of_clk_init_cb_t)match->data;
> - pr_debug("%s: initializing: %s\n", __func__, np->name);
> - clk_init_cb(np);
> - }
> + /* add clocks node info */
> + clocks_node_ptr[index] = clocks;
> +}
>
> - list_for_each_entry_safe(retry, tmp, &retry_list, link) {
> - pr_debug("retry-init: %s\n", retry->node->name);
> - retry->func(retry->hw, retry->node);
> - list_del(&retry->link);
> - kfree(retry);
> +/**
> + * ti_dt_clk_init_retry_clks - init clocks from the retry list
> + *
> + * Initializes any clocks that have failed to initialize before,
> + * reasons being missing parent node(s) during earlier init. This
> + * typically happens only for DPLLs which need to have both of their
> + * parent clocks ready during init.
> + */
> +void ti_dt_clk_init_retry_clks(void)
> +{
> + struct clk_init_item *retry;
> + struct clk_init_item *tmp;
> + int retries = 5;
> +
> + while (!list_empty(&retry_list) && retries) {
> + list_for_each_entry_safe(retry, tmp, &retry_list, link) {
> + pr_debug("retry-init: %s\n", retry->node->name);
> + retry->func(retry->hw, retry->node);
> + list_del(&retry->link);
> + kfree(retry);
> + }
> + retries--;
> }
> }
> diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
> index e8d8a35..f75acbf 100644
> --- a/include/linux/clk/ti.h
> +++ b/include/linux/clk/ti.h
> @@ -292,6 +292,7 @@ void omap2xxx_clkt_vps_init(void);
> void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
> void ti_dt_clocks_register(struct ti_dt_clk *oclks);
> void ti_dt_clk_init_provider(struct device_node *np, int index);
> +void ti_dt_clk_init_retry_clks(void);
> void ti_dt_clockdomains_setup(void);
> int ti_clk_retry_init(struct device_node *node, struct clk_hw *hw,
> ti_of_clk_init_cb_t func);
> --
> 1.7.9.5
>
More information about the linux-arm-kernel
mailing list