[PATCH v8 00/10] rtc: at91sam9: add DT support

[Boris BREZILLON]

Hello,

This patch series adds DT support to the atmel at91sam9 RTC driver.

It also removes any machine specific inclusions to prepare the migration
to multi platform kernel support, and retain the slow clock to prevent
the CCF from disabling it at the end of boot.
  
Best Regards,

Boris

Changes since v7:
 - fix typo
 - fix sclk_rate test
 - state that RTC_DRV_AT91SAM9_RTT and RTC_DRV_AT91SAM9_GPBR are no longer
   used when booting a DT board

Changes since v6:
 - fix typos
 - add missing commit messages
 - rework the Kconfig description

Changes since v5:
 - replace 'rtc' by 'rtt' where appropriate
 - fix commit messages

Changes since v4:
 - add a TODO comment to remember removing non DT board support code

Changes since v3:
 - add GPBR DT bindings doc
 - fix a coding style issues
 - add Alexandre's Acked-by
 - change RTT DT bindings

Changes since v2:
 - make use of syscon/regmap to avoid directly requesting/mapping a GPBR
   memory region in the RTT driver

Changes since v1:
 - remove non CCF specific case by adding the appropriate clk_lookup
   entries in arch/arm/mach-at91/<soc-name>.c files


Boris BREZILLON (10):
  rtc: at91sam9: remove references to mach specific headers
  rtc: at91sam9: use standard readl/writel functions instead of raw
    versions
  rtc: at91sam9: replace devm_ioremap by devm_ioremap_resource
  rtc: at91sam9: add DT support
  rtc: at91sam9: make use of syscon/regmap to access GPBR registers
  rtc: at91sam9: rework the Kconfig description
  ARM: at91: add clk_lookup entry for RTT devices
  rtc: at91sam9: use clk API instead of relying on AT91_SLOW_CLOCK
  rtc: at91sam9: add DT bindings documentation
  mfd: syscon: add Atmel GPBR DT bindings documention

 .../devicetree/bindings/mfd/atmel,gpbr.txt         |  15 +++
 .../devicetree/bindings/rtc/atmel,at91sam9-rtc.txt |  23 ++++
 arch/arm/mach-at91/at91sam9260.c                   |   2 +
 arch/arm/mach-at91/at91sam9261.c                   |   2 +
 arch/arm/mach-at91/at91sam9263.c                   |   4 +
 arch/arm/mach-at91/at91sam9g45.c                   |   2 +
 arch/arm/mach-at91/at91sam9rl.c                    |   2 +
 arch/arm/mach-at91/clock.c                         |   2 +-
 arch/arm/mach-at91/clock.h                         |   1 +
 drivers/rtc/Kconfig                                |  24 ++--
 drivers/rtc/rtc-at91sam9.c                         | 138 ++++++++++++++++-----
 11 files changed, 177 insertions(+), 38 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/atmel,gpbr.txt
 create mode 100644 Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt

-- 
1.9.1