[PATCH] i2c: axxia: Add I2C driver for AXM55xx

[Anders Berg]

On Mon, Sep 22, 2014 at 11:59 AM, Wolfram Sang <wsa at the-dreams.de> wrote:
>
>> >> +             if (idev->msg_xfrd == 0 && i2c_m_recv_len(msg)) {
>> >> +                     /*
>> >> +                      * Check length byte for SMBus block read
>> >> +                      */
>> >> +                     if (c <= 0) {
>> >> +                             idev->msg_err = -EPROTO;
>> >> +                             i2c_int_disable(idev, ~0);
>> >> +                             complete(&idev->msg_complete);
>> >> +                             break;
>> >> +                     } else if (c > I2C_SMBUS_BLOCK_MAX) {
>> >> +                             c = I2C_SMBUS_BLOCK_MAX;
>> >
>> > What about returning -EPROTO here as well? I don't think that reading
>> > just a slice of all the data is helpful.
>> >
>>
>> Right, that is probably true. This came from the device I was using to
>> test the block-read operation. This device violated the
>> I2C_SMBUS_BLOCK_MAX limit, so I added this truncation to at least get
>> something out...
>
> Which device was it? I know there are some doing that, yet I like to
> know which ones.

It was a LTC2974, register MFR_FAULT_LOG (0xee).

>
>> >> +{
>> >> +     struct axxia_i2c_dev *idev = _dev;
>> >> +     u32 status;
>> >> +
>> >> +     if (!idev->msg)
>> >> +             return IRQ_NONE;
>> >
>> > This is actually not true. There might be interrupt bits set, so there
>> > is an IRQ. There shouldn't be one, right, but that's another case IMO.
>> >
>>
>> You could see it as: there is no interrupt that this handler is
>> interested in serving. I'd like to keep this test as there is some
>> legacy software that could be run on platforms with this driver that
>> access the I2C controller directly. If this happens, this test assures
>> that the user get an informative "unhandled irq" error message
>> (instead of a null pointer dereference).
>
> IRQ_NONE is "this interrupt wasn't by me" so for shared IRQs, the next
> handler can check. You shouldn't remove the check per se. Still,  since
> this interrupt was definately from the I2C core, you should return
> IRQ_HANDLED and print an error message to the logs.
>

Ok, I'll do that.


>> >> +static int
>> >> +axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg)
>> >> +{
>> >> +     u32 int_mask = MST_STATUS_ERR | MST_STATUS_SNS;
>> >> +     u32 rx_xfer, tx_xfer;
>> >> +     u32 addr_1, addr_2;
>> >> +     int ret;
>> >> +
>> >> +     if (msg->len == 0 || msg->len > 255)
>> >> +             return -EINVAL;
>> >
>> > Ouch, really? Maybe we should warn the user here.
>>
>> Yeah, the transfer length register limits the length to 255. I'll add
>> a warning here.
>
> Please also add this information to the Kconfig description and
> somewhere at the top of the source file. This is an important flaw which
> people should easily find out about.
>

Ok.

Thanks,
Anders