[PATCH v2] ARM: ls1021a: add gating clocks to IP blocks.
Uwe Kleine-König
u.kleine-koenig at pengutronix.de
Mon Sep 22 00:00:37 PDT 2014
Hello,
On Mon, Sep 22, 2014 at 02:09:20PM +0800, Xiubo Li wrote:
> A given application may not use all the peripherals on the device.
> In this case, it may be desirable to disable unused peripherals.
> DCFG provides a mechanism for gating clocks to IP blocks that are
> not used when running an application.
>
> Signed-off-by: Xiubo Li <Li.Xiubo at freescale.com>
> ---
>
> Change in v2:
> - Add binding support.
>
>
> .../devicetree/bindings/clock/ls1021a-clock.txt | 27 +++++
> arch/arm/mach-imx/Makefile | 2 +
> arch/arm/mach-imx/clk-ls1021a.c | 124 +++++++++++++++++++++
> arch/arm/mach-imx/clk.h | 21 ++++
> include/dt-bindings/clock/ls1021a-clock.h | 54 +++++++++
> 5 files changed, 228 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/ls1021a-clock.txt
> create mode 100644 arch/arm/mach-imx/clk-ls1021a.c
> create mode 100644 include/dt-bindings/clock/ls1021a-clock.h
>
> diff --git a/Documentation/devicetree/bindings/clock/ls1021a-clock.txt b/Documentation/devicetree/bindings/clock/ls1021a-clock.txt
> new file mode 100644
> index 0000000..e53d976
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/ls1021a-clock.txt
> @@ -0,0 +1,27 @@
> +Gating clock bindings for Freescale LS1021A SOC
> +
> +Required properties:
> +- compatible: Should be "fsl,ls1021a-gate"
> +- reg: Address and length of the register set
> +- #clock-cells: Should be <1>
> +
> +The clock consumers should specify the desired clock by having one clock
> +ID in its "clocks" phandle cell.
> +Please see include/dt-bindings/clock/ls1021a-clock.h for the full list of
> +LS1021A clock IDs.
> +
> +Example:
> +
> +gate: gate at 1ee0000 {
> + compatible = "fsl,ls1021a-gate";
> + reg = <0x0 0x1ee0000 0x0 0x10000>;
> + #clock-cells = <1>;
> +};
> +
> +wdog0: wdog at 2ad0000 {
> + compatible = "fsl,ls1021a-wdt", "fsl,imx21-wdt";
> + reg = <0x0 0x2ad0000 0x0 0x10000>;
> + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gate LS1021A_CLK_WDOG12_EN>;
> + clock-names = "wdog12_en";
> +};
> diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
> index 6e4fcd8..f6a1544 100644
> --- a/arch/arm/mach-imx/Makefile
> +++ b/arch/arm/mach-imx/Makefile
> @@ -110,4 +110,6 @@ obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
>
> obj-$(CONFIG_SOC_VF610) += clk-vf610.o mach-vf610.o
>
> +obj-$(CONFIG_SOC_LS1021A) += clk-ls1021a.o
> +
> obj-y += devices/
> diff --git a/arch/arm/mach-imx/clk-ls1021a.c b/arch/arm/mach-imx/clk-ls1021a.c
> new file mode 100644
> index 0000000..680b616
> --- /dev/null
> +++ b/arch/arm/mach-imx/clk-ls1021a.c
> @@ -0,0 +1,124 @@
> +/*
> + * Copyright 2014 Freescale Semiconductor, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
This empty line can be removed.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/of_address.h>
> +#include <dt-bindings/clock/ls1021a-clock.h>
> +
> +#include "clk.h"
> +
> +static struct clk *clk[LS1021A_CLK_END];
> +static struct clk_onecell_data clk_data;
> +
> +static void __init ls1021a_clocks_init(struct device_node *np)
> +{
> + void __iomem *dcfg_base;
> +
> +#define DCFG_CCSR_DEVDISR1 (dcfg_base + 0x70)
> +#define DCFG_CCSR_DEVDISR2 (dcfg_base + 0x74)
> +#define DCFG_CCSR_DEVDISR3 (dcfg_base + 0x78)
> +#define DCFG_CCSR_DEVDISR4 (dcfg_base + 0x7c)
> +#define DCFG_CCSR_DEVDISR5 (dcfg_base + 0x80)
> +
> + dcfg_base = of_iomap(np, 0);
> +
> + BUG_ON(!dcfg_base);
Is this worth a BUG? Or is it enough to do
if (!dcfg_base) {
pr_warn("failed to map fsl,ls1021a-gate device\n");
return
}
> +
> + clk[LS1021A_CLK_PBL_EN] = ls1021a_clk_gate("pbl_en", "dummy",
> + DCFG_CCSR_DEVDISR1, 0, true);
If the machine's device tree contains two (or more) nodes that are
compatible to "fsl,ls1021a-gate", you overwrite your static clk array. Is
it worth to add another check here?:
if (clk[LS1021A_CLK_PBL_EN]) {
pr_warn("only a single instance of fsl,ls1021a-gate supported\n");
return;
}
(Is it a valid case that ls1021a_clk_gate returns NULL? In this case the
condition above is wrong.)
> + clk[LS1021A_CLK_ESDHC_EN] = ls1021a_clk_gate("esdhc_en", "dummy",
> + DCFG_CCSR_DEVDISR1, 2, true);
> + clk[LS1021A_CLK_DMA1_EN] = ls1021a_clk_gate("dma1_en", "dummy",
> + DCFG_CCSR_DEVDISR1, 8, true);
> + clk[LS1021A_CLK_DMA2_EN] = ls1021a_clk_gate("dma2_en", "dummy",
> + DCFG_CCSR_DEVDISR1, 9, true);
> + clk[LS1021A_CLK_USB3_PHY_EN] = ls1021a_clk_gate("usb3_phy_en", "dummy",
> + DCFG_CCSR_DEVDISR1, 12, true);
> + clk[LS1021A_CLK_USB2_EN] = ls1021a_clk_gate("usb2_en", "dummy",
> + DCFG_CCSR_DEVDISR1, 13, true);
> + clk[LS1021A_CLK_SATA_EN] = ls1021a_clk_gate("sata_en", "dummy",
> + DCFG_CCSR_DEVDISR1, 16, true);
> + clk[LS1021A_CLK_USB3_EN] = ls1021a_clk_gate("usb3_en", "dummy",
> + DCFG_CCSR_DEVDISR1, 17, true);
> + clk[LS1021A_CLK_SEC_EN] = ls1021a_clk_gate("sec_en", "dummy",
> + DCFG_CCSR_DEVDISR1, 22, true);
> + clk[LS1021A_CLK_2D_ACE_EN] = ls1021a_clk_gate("2d_ace_en", "dummy",
> + DCFG_CCSR_DEVDISR1, 30, true);
> + clk[LS1021A_CLK_QE_EN] = ls1021a_clk_gate("qe_en", "dummy",
> + DCFG_CCSR_DEVDISR1, 31, true);
> +
> + clk[LS1021A_CLK_ETSEC1_EN] = ls1021a_clk_gate("etsec1_en", "dummy",
> + DCFG_CCSR_DEVDISR2, 0, true);
> + clk[LS1021A_CLK_ETSEC2_EN] = ls1021a_clk_gate("etsec2_en", "dummy",
> + DCFG_CCSR_DEVDISR2, 1, true);
> + clk[LS1021A_CLK_ETSEC3_EN] = ls1021a_clk_gate("etsec3_en", "dummy",
> + DCFG_CCSR_DEVDISR2, 2, true);
> +
> + clk[LS1021A_CLK_PEX1_EN] = ls1021a_clk_gate("pex1_en", "dummy",
> + DCFG_CCSR_DEVDISR3, 0, true);
> + clk[LS1021A_CLK_PEX2_EN] = ls1021a_clk_gate("pex2_en", "dummy",
> + DCFG_CCSR_DEVDISR3, 1, true);
> +
> + clk[LS1021A_CLK_DUART1_EN] = ls1021a_clk_gate("duart1_en", "dummy",
> + DCFG_CCSR_DEVDISR4, 2, true);
> + clk[LS1021A_CLK_DUART2_EN] = ls1021a_clk_gate("duart2_en", "dummy",
> + DCFG_CCSR_DEVDISR4, 3, true);
> + clk[LS1021A_CLK_QSPI_EN] = ls1021a_clk_gate("qspi_en", "dummy",
> + DCFG_CCSR_DEVDISR4, 4, true);
> +
> + clk[LS1021A_CLK_DDR_EN] = ls1021a_clk_gate("ddr_en", "dummy",
> + DCFG_CCSR_DEVDISR5, 0, true);
> + clk[LS1021A_CLK_OCRAM1_EN] = ls1021a_clk_gate("ocram1_en", "dummy",
> + DCFG_CCSR_DEVDISR5, 4, true);
> + clk[LS1021A_CLK_IFC_EN] = ls1021a_clk_gate("ifc_en", "dummy",
> + DCFG_CCSR_DEVDISR5, 8, true);
> + clk[LS1021A_CLK_GPIO_EN] = ls1021a_clk_gate("gpio_en", "dummy",
> + DCFG_CCSR_DEVDISR5, 9, true);
> + clk[LS1021A_CLK_DBG_EN] = ls1021a_clk_gate("dbg_en", "dummy",
> + DCFG_CCSR_DEVDISR5, 10, true);
> + clk[LS1021A_CLK_FLEXCAN1_EN] = ls1021a_clk_gate("flexcan1_en", "dummy",
> + DCFG_CCSR_DEVDISR5, 12, true);
> + clk[LS1021A_CLK_FLEXCAN234_EN] = ls1021a_clk_gate("flexcan234_en",
> + "dummy", DCFG_CCSR_DEVDISR5, 13, true);
> + /* For flextiemr 2/3/4/5/6/7/8 */
s/tiemr/timer/
> + clk[LS1021A_CLK_FLEXTIMER_EN] = ls1021a_clk_gate("flextimer_en",
> + "dummy", DCFG_CCSR_DEVDISR5, 14, true);
> + clk[LS1021A_CLK_SECMON_EN] = ls1021a_clk_gate("secmon_en", "dummy",
> + DCFG_CCSR_DEVDISR5, 17, true);
> + clk[LS1021A_CLK_WDOG12_EN] = ls1021a_clk_gate("wdog12_en", "dummy",
> + DCFG_CCSR_DEVDISR5, 21, true);
> + clk[LS1021A_CLK_I2C23_EN] = ls1021a_clk_gate("i2c23_en", "dummy",
> + DCFG_CCSR_DEVDISR5, 22, true);
> + /* For SAI 1/2/3/4 */
> + clk[LS1021A_CLK_SAI_EN] = ls1021a_clk_gate("sai_en", "dummy",
> + DCFG_CCSR_DEVDISR5, 23, true);
> + /* For lpuart 2/3/4/5/6 */
> + clk[LS1021A_CLK_LPUART_EN] = ls1021a_clk_gate("lpuart_en", "dummy",
> + DCFG_CCSR_DEVDISR5, 24, true);
> + clk[LS1021A_CLK_DSPI12_EN] = ls1021a_clk_gate("dspi12_en", "dummy",
> + DCFG_CCSR_DEVDISR5, 25, true);
> + clk[LS1021A_CLK_ASRC_EN] = ls1021a_clk_gate("asrc_en", "dummy",
> + DCFG_CCSR_DEVDISR5, 26, true);
> + clk[LS1021A_CLK_SPDIF_EN] = ls1021a_clk_gate("spdif_en", "dummy",
> + DCFG_CCSR_DEVDISR5, 27, true);
> + clk[LS1021A_CLK_I2C1_EN] = ls1021a_clk_gate("i2c1_en", "dummy",
> + DCFG_CCSR_DEVDISR5, 29, true);
> + clk[LS1021A_CLK_LPUART1_EN] = ls1021a_clk_gate("lpuart1_en", "dummy",
> + DCFG_CCSR_DEVDISR5, 30, true);
> + clk[LS1021A_CLK_FLEXTIMER1_EN] = ls1021a_clk_gate("flextimer1_en",
> + "dummy", DCFG_CCSR_DEVDISR5, 31, true);
> +
> + /* Add the clocks to provider list */
> + clk_data.clks = clk;
> + clk_data.clk_num = ARRAY_SIZE(clk);
These two could be initialised statically.
> + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
> +}
> +CLK_OF_DECLARE(ls1021a, "fsl,ls1021a-gate", ls1021a_clocks_init);
> diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h
> index 4cdf8b6..dd9e369 100644
> --- a/arch/arm/mach-imx/clk.h
> +++ b/arch/arm/mach-imx/clk.h
> @@ -107,6 +107,27 @@ static inline struct clk *imx_clk_gate_dis(const char *name, const char *parent,
> shift, CLK_GATE_SET_TO_DISABLE, &imx_ccm_lock);
> }
>
> +/* The DCFG registers are in big endian mode on LS1021A SoC */
> +static inline u8 ls1021a_clk_calculate_shift(u8 shift)
> +{
> + int m, n;
> +
> + m = shift / 8;
> + n = shift % 8;
> +
> + return (3 - m) * 8 + n;
> +}
> +
> +static inline struct clk *ls1021a_clk_gate(const char *name, const char *parent,
> + void __iomem *reg, u8 shift, bool big_endian)
> +{
> + if (big_endian)
This is always true up to now. Does this change in the future? If not I
suggest to drop the parameter. Even if this might change, I would
prefer:
clk[LS1021A_CLK_FLEXTIMER1_EN] =
ls1021a_clk_gate("flextimer1_en",
"dummy", DCFG_CCSR_DEVDISR5,
ls1021a_clk_shift_be(31));
which is moreover more likely to be optimizable by the compiler.
But maybe that's only me.
> + shift = ls1021a_clk_calculate_shift(shift);
> +
> + return clk_register_gate(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
> + shift, CLK_GATE_SET_TO_DISABLE, &imx_ccm_lock);
> +}
> +
> static inline struct clk *imx_clk_mux(const char *name, void __iomem *reg,
> u8 shift, u8 width, const char **parents, int num_parents)
> {
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
More information about the linux-arm-kernel
mailing list