[PATCH 0/6] ARM: sunxi: Add basic support for Allwinner A80 SoC
wens at csie.org
Sun Sep 21 07:58:07 PDT 2014
This patch series adds very basic support for Allwinner's A80 SoC,
a big.LITTLE architecture with 4 Cortex-A7s and 4 Cortex-A15s.
Development is done on the A80 Optimus Board, the defacto development
board for the A80, with the accompanying SDK as a reference.
So far I've been unable to get the board to boot from MMC, or
using Android fastboot. I'm using Allwinner's FEL mode to load
the bootloader and kernel+dtb image over USB. Notes on my attempts
can be found here: http://linux-sunxi.org/User:Wens#A80_Optimus
Patch 1 introduces the compatible string for the A80.
Patch 2 adds options to use UART0 on the A80 as the debug port for
Patch 3 adds a barebone dtsi with just the cpu, memory and uart nodes.
Patch 4 adds a barebone dts for the A80 Optimus Board.
Patch 5 documents the vendor prefix for Merrii Technology Co., Ltd,
the designer and vendor of the A80 Optimus Board.
Patch 6 documents all the Allwinner SoCs we currently support.
Chen-Yu Tsai (6):
ARM: sunxi: Introduce Allwinner A80 support
ARM: sunxi: Add debug uart used by sun9i (Allwinner A80)
ARM: dts: sunxi: Add Allwinner A80 dtsi
ARM: dts: sun9i: Add A80 Optimus Board support
devicetree: bindings: Add vendor prefix for Merrii Technology Co.,
devicetree: bindings: Document supported Allwinner sunxi SoCs
Documentation/devicetree/bindings/arm/sunxi.txt | 12 +
.../devicetree/bindings/vendor-prefixes.txt | 1 +
arch/arm/Kconfig.debug | 10 +
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/sun9i-a80-optimus.dts | 66 +++++
arch/arm/boot/dts/sun9i-a80.dtsi | 280 +++++++++++++++++++++
arch/arm/mach-sunxi/Kconfig | 5 +
arch/arm/mach-sunxi/sunxi.c | 9 +
8 files changed, 385 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/sunxi.txt
create mode 100644 arch/arm/boot/dts/sun9i-a80-optimus.dts
create mode 100644 arch/arm/boot/dts/sun9i-a80.dtsi
More information about the linux-arm-kernel