[PATCH v4 5/8] arm64: dts: Add initial device tree support for EXYNOS7
Kukjin Kim
kgene at kernel.org
Fri Sep 19 04:26:04 PDT 2014
Naveen Krishna Chatradhi wrote:
>
> Add initial device tree nodes for EXYNOS7 SoC and board dts file
> to support Espresso board based on Exynos7 SoC.
>
> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen at samsung.com>
> Cc: Rob Herring <robh at kernel.org>
> Cc: Catalin Marinas <catalin.marinas at arm.com>
Looks good to me,
Acked-by: Kukjin Kim <kgene.kim at samsung.com>
Thanks,
Kukjin
> ---
> arch/arm64/boot/dts/Makefile | 1 +
> arch/arm64/boot/dts/exynos/Makefile | 5 +
> arch/arm64/boot/dts/exynos/exynos7-espresso.dts | 39 ++++++
> arch/arm64/boot/dts/exynos/exynos7.dtsi | 160 +++++++++++++++++++++++
> 4 files changed, 205 insertions(+)
> create mode 100644 arch/arm64/boot/dts/exynos/Makefile
> create mode 100644 arch/arm64/boot/dts/exynos/exynos7-espresso.dts
> create mode 100644 arch/arm64/boot/dts/exynos/exynos7.dtsi
>
> diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
> index 309c3dc..b13bf21 100644
> --- a/arch/arm64/boot/dts/Makefile
> +++ b/arch/arm64/boot/dts/Makefile
> @@ -1,5 +1,6 @@
> dts-dirs += apm
> dts-dirs += arm
> +dts-dirs += exynos
>
> always := $(dtb-y)
> subdir-y := $(dts-dirs)
> diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile
> new file mode 100644
> index 0000000..20310e5
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/Makefile
> @@ -0,0 +1,5 @@
> +dtb-$(CONFIG_ARCH_EXYNOS7) += exynos7-espresso.dtb
> +
> +always := $(dtb-y)
> +subdir-y := $(dts-dirs)
> +clean-files := *.dtb
> diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-
> espresso.dts
> new file mode 100644
> index 0000000..e2c8283
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
> @@ -0,0 +1,39 @@
> +/*
> + * SAMSUNG Exynos7 Espresso board device tree source
> + *
> + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +/dts-v1/;
> +#include "exynos7.dtsi"
> +
> +/ {
> + model = "Samsung Exynos7 Espresso board based on EXYNOS7";
> + compatible = "samsung,exynos7-espresso", "samsung,exynos7";
> +
> + aliases {
> + serial0 = &serial_2;
> + };
> +
> + chosen {
> + linux,stdout-path = &serial_2;
> + };
> +
> + memory at 40000000 {
> + device_type = "memory";
> + reg = <0x0 0x40000000 0x0 0xC0000000>;
> + };
> +};
> +
> +&fin_pll {
> + clock-frequency = <24000000>;
> +};
> +
> +&serial_2 {
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> new file mode 100644
> index 0000000..c5b1b86
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> @@ -0,0 +1,160 @@
> +/*
> + * SAMSUNG EXYNOS7 SoC device tree source
> + *
> + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <dt-bindings/clock/exynos7-clk.h>
> +
> +/ {
> + compatible = "samsung,exynos7";
> + interrupt-parent = <&gic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu at 0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a57", "arm,armv8";
> + enable-method = "psci";
> + reg = <0x0>;
> + };
> +
> + cpu at 1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a57", "arm,armv8";
> + enable-method = "psci";
> + reg = <0x1>;
> + };
> +
> + cpu at 2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a57", "arm,armv8";
> + enable-method = "psci";
> + reg = <0x2>;
> + };
> +
> + cpu at 3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a57", "arm,armv8";
> + enable-method = "psci";
> + reg = <0x3>;
> + };
> + };
> +
> + psci {
> + compatible = "arm,psci-0.2";
> + method = "smc";
> + };
> +
> + soc: soc {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0 0 0x18000000>;
> +
> + chipid at 10000000 {
> + compatible = "samsung,exynos4210-chipid";
> + reg = <0x10000000 0x100>;
> + };
> +
> + fin_pll: xxti {
> + compatible = "fixed-clock";
> + clock-output-names = "fin_pll";
> + #clock-cells = <0>;
> + };
> +
> + gic: interrupt-controller at 11001000 {
> + compatible = "arm,gic-400";
> + #interrupt-cells = <3>;
> + #address-cells = <0>;
> + interrupt-controller;
> + reg = <0x11001000 0x1000>,
> + <0x11002000 0x1000>,
> + <0x11004000 0x2000>,
> + <0x11006000 0x2000>;
> + };
> +
> + clock_topc: clock-controller at 10570000 {
> + compatible = "samsung,exynos7-clock-topc";
> + reg = <0x10570000 0x10000>;
> + #clock-cells = <1>;
> + };
> +
> + clock_top0: clock-controller at 105d0000 {
> + compatible = "samsung,exynos7-clock-top0";
> + reg = <0x105d0000 0xb000>;
> + #clock-cells = <1>;
> + };
> +
> + clock_peric0: clock-controller at 13610000 {
> + compatible = "samsung,exynos7-clock-peric0";
> + reg = <0x13610000 0xd00>;
> + #clock-cells = <1>;
> + };
> +
> + clock_peric1: clock-controller at 14C80000 {
> + compatible = "samsung,exynos7-clock-peric1";
> + reg = <0x14c80000 0xd00>;
> + #clock-cells = <1>;
> + };
> +
> + clock_peris: clock-controller at 10040000 {
> + compatible = "samsung,exynos7-clock-peris";
> + reg = <0x10040000 0xd00>;
> + #clock-cells = <1>;
> + };
> +
> + serial_0: serial at 13630000 {
> + compatible = "samsung,exynos4210-uart";
> + reg = <0x13630000 0x100>;
> + interrupts = <0 440 0>;
> + clocks = <&clock_peric0 PCLK_UART0>, <&clock_peric0 SCLK_UART0>;
> + clock-names = "uart", "clk_uart_baud0";
> + status = "disabled";
> + };
> +
> + serial_1: serial at 14c20000 {
> + compatible = "samsung,exynos4210-uart";
> + reg = <0x14c20000 0x100>;
> + interrupts = <0 456 0>;
> + clocks = <&clock_peric1 PCLK_UART1>, <&clock_peric1 SCLK_UART1>;
> + clock-names = "uart", "clk_uart_baud0";
> + status = "disabled";
> + };
> +
> + serial_2: serial at 14c30000 {
> + compatible = "samsung,exynos4210-uart";
> + reg = <0x14c30000 0x100>;
> + interrupts = <0 457 0>;
> + clocks = <&clock_peric1 PCLK_UART2>, <&clock_peric1 SCLK_UART2>;
> + clock-names = "uart", "clk_uart_baud0";
> + status = "disabled";
> + };
> +
> + serial_3: serial at 14c40000 {
> + compatible = "samsung,exynos4210-uart";
> + reg = <0x14c40000 0x100>;
> + interrupts = <0 458 0>;
> + clocks = <&clock_peric1 PCLK_UART3>, <&clock_peric1 SCLK_UART3>;
> + clock-names = "uart", "clk_uart_baud0";
> + status = "disabled";
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <1 13 0xff01>,
> + <1 14 0xff01>,
> + <1 11 0xff01>,
> + <1 10 0xff01>;
> + };
> + };
> +};
> --
> 1.7.9.5
More information about the linux-arm-kernel
mailing list