[PATCH] serial: cadence: Add generic earlycon support

[Greg Kroah-Hartman]

On Wed, Sep 17, 2014 at 03:44:58PM +0200, Michal Simek wrote:
> Hi Greg,
> 
> On 09/10/2014 12:43 PM, Michal Simek wrote:
> > Add earlycon support for the cadence serial port.
> > This is based on recent patches:
> > "tty/serial: pl011: add generic earlycon support"
> > (sha1: 0d3c673e7881e691991b2a4745bd4f149603baa2)
> > "tty/serial: add arm/arm64 semihosting earlycon"
> > (sha1: d50d7269ebcb438afa346cdffce0f4e2a1b9e831)
> > 
> > Signed-off-by: Michal Simek <michal.simek at xilinx.com>
> > ---
> > 
> >  Documentation/kernel-parameters.txt |  6 ++++++
> >  drivers/tty/serial/Kconfig          |  1 +
> >  drivers/tty/serial/xilinx_uartps.c  | 19 +++++++++++++++++++
> >  3 files changed, 26 insertions(+)
> > 
> > diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
> > index a8eb6afce6a4..97055dc43167 100644
> > --- a/Documentation/kernel-parameters.txt
> > +++ b/Documentation/kernel-parameters.txt
> > @@ -921,6 +921,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
> > 
> >  	earlycon=	[KNL] Output early console device and options.
> > 
> > +		cdns,<addr>
> > +			Start an early, polled-mode console on a cadence serial
> > +			port at the specified address. The cadence serial port
> > +			must already be setup and configured. Options are not
> > +			yet supported.
> > +
> >  		uart[8250],io,<addr>[,options]
> >  		uart[8250],mmio,<addr>[,options]
> >  		uart[8250],mmio32,<addr>[,options]
> > diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
> > index b4d61e6bf28c..72fd2b6e2241 100644
> > --- a/drivers/tty/serial/Kconfig
> > +++ b/drivers/tty/serial/Kconfig
> > @@ -1411,6 +1411,7 @@ config SERIAL_XILINX_PS_UART_CONSOLE
> >  	bool "Cadence UART console support"
> >  	depends on SERIAL_XILINX_PS_UART=y
> >  	select SERIAL_CORE_CONSOLE
> > +	select SERIAL_EARLYCON
> >  	help
> >  	  Enable a Cadence UART port to be the system console.
> > 
> > diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
> > index 01951d27cc03..675f3fe068f6 100644
> > --- a/drivers/tty/serial/xilinx_uartps.c
> > +++ b/drivers/tty/serial/xilinx_uartps.c
> > @@ -1051,6 +1051,25 @@ static void cdns_uart_console_putchar(struct uart_port *port, int ch)
> >  	cdns_uart_writel(ch, CDNS_UART_FIFO_OFFSET);
> >  }
> > 
> > +static void cdns_early_write(struct console *con, const char *s, unsigned n)
> > +{
> > +	struct earlycon_device *dev = con->data;
> > +
> > +	uart_console_write(&dev->port, s, n, cdns_uart_console_putchar);
> > +}
> > +
> > +static int __init cdns_early_console_setup(struct earlycon_device *device,
> > +					   const char *opt)
> > +{
> > +	if (!device->port.membase)
> > +		return -ENODEV;
> > +
> > +	device->con->write = cdns_early_write;
> > +
> > +	return 0;
> > +}
> > +EARLYCON_DECLARE(cdns, cdns_early_console_setup);
> > +
> >  /**
> >   * cdns_uart_console_write - perform write operation
> >   * @co: Console handle
> > --
> > 1.8.2.3
> > 
> 
> Any problem with this patch?

Don't know, it's in my todo queue which is really long at the moment...