[PATCH v5 2/4] dt-bindings: document Rockchip thermal

[Doug Anderson]

Caesar,

On Tue, Sep 16, 2014 at 8:59 PM, Caesar Wang <caesar.wang at rock-chips.com> wrote:
> This add the necessary binding documentation for the thermal
> found on Rockchip SoCs
>
> Signed-off-by: zhaoyifeng <zyf at rock-chips.com>
> Signed-off-by: Caesar Wang <caesar.wang at rock-chips.com>
> ---
>  .../bindings/thermal/rockchip-thermal.txt          | 41 ++++++++++++++++++++++
>  1 file changed, 41 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
>
> diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
> new file mode 100644
> index 0000000..6fc8bc3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
> @@ -0,0 +1,41 @@
> +* Temperature Sensor ADC (TSADC) on rockchip SoCs
> +
> +Required properties:
> +- compatible: "rockchip,rk3288-tsadc"
> +- reg: physical base address of the controller and length of memory mapped
> +       region.
> +- interrupts: The interrupt number to the cpu. The interrupt specifier format
> +             depends on the interrupt controller.
> +- clocks: Must contain an entry for each entry in clock-names.
> +- clock-names: Shall be "tsadc" for the converter-clock, and "apb_pclk" for
> +              the peripheral clock.
> +- num-trips:  number of total trip points, this is required, set it 0 if none,
> +             if greater than 0, the following properties must be defined;

nit: there is whitespace damage (space before tab) on the line before
this one.  It's more obvious in the patch you uploaded to gerrit which
highlights this in red:

https://chromium-review.googlesource.com/#/c/213967/5/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt

Did you run your patches through checkpatch before submitting?

-Doug