[PATCH] can: at91_can: prepare and unprepare the clock

[David Dueck]

This prevents a warning.

Signed-off-by: David Dueck <davidcdueck at googlemail.com>
Signed-off-by: Anthony Harivel <anthony.harivel at emtrion.de>
---
 drivers/net/can/at91_can.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
index f07fa89..7dcb790 100644
--- a/drivers/net/can/at91_can.c
+++ b/drivers/net/can/at91_can.c
@@ -1123,7 +1123,7 @@ static int at91_open(struct net_device *dev)
 	struct at91_priv *priv = netdev_priv(dev);
 	int err;
 
-	clk_enable(priv->clk);
+	clk_prepare_enable(priv->clk);
 
 	/* check or determine and set bittime */
 	err = open_candev(dev);
@@ -1149,7 +1149,7 @@ static int at91_open(struct net_device *dev)
  out_close:
 	close_candev(dev);
  out:
-	clk_disable(priv->clk);
+	clk_disable_unprepare(priv->clk);
 
 	return err;
 }
@@ -1166,7 +1166,7 @@ static int at91_close(struct net_device *dev)
 	at91_chip_stop(dev, CAN_STATE_STOPPED);
 
 	free_irq(dev->irq, dev);
-	clk_disable(priv->clk);
+	clk_disable_unprepare(priv->clk);
 
 	close_candev(dev);
 
-- 
2.1.0