[PATCH v2 1/3] ARM: dts: imx6: add pm_power_off support for i.mx6 chips

[Shawn Guo]

On Fri, Sep 12, 2014 at 04:48:57PM +0800, Robin Gong wrote:
> All chips of i.mx6 can be powered off by programming SNVS.
> For example :
> On i.mx6q-sabresd board, PMIC_ON_REQ connect with external
> pmic ON/OFF pin, that will cause the whole PMIC powered off
> except VSNVS. And system can restart once PMIC_ON_REQ goes
> high by push POWRER key.
> 
> Signed-off-by: Robin Gong <b38343 at freescale.com>
> ---
>  .../bindings/power_supply/imx-snvs-poweroff.txt     | 21 +++++++++++++++++++++

Binding docs should be generally a separate patch or in the driver
patch, which uses the bindings.

Shawn

>  arch/arm/boot/dts/imx6qdl.dtsi                      |  5 +++++
>  arch/arm/boot/dts/imx6sl.dtsi                       |  5 +++++
>  arch/arm/boot/dts/imx6sx.dtsi                       |  5 +++++
>  4 files changed, 36 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt
> 
> diff --git a/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt b/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt
> new file mode 100644
> index 0000000..1a3ab9a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt
> @@ -0,0 +1,21 @@
> +i.mx6 Poweroff Driver
> +
> +SNVS_LPCR in SNVS module can power off the whole system by pull
> +PMIC_ON_REQ low.
> +
> +Required Properties:
> +-compatible: "fsl,sec-v4.0-poweroff"
> +-reg: Specifies the physical address of the SNVS_LPCR register
> +
> +Example:
> +	snvs at 020cc000 {
> +		compatible = "fsl,sec-v4.0-mon", "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0 0x020cc000 0x4000>;
> +		.....
> +		snvs-poweroff at 38 {
> +			compatible = "fsl,sec-v4.0-poweroff";
> +			reg = <0x38 0x4>;
> +		};
> +	}
> diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
> index 70d7207..d2d7563 100644
> --- a/arch/arm/boot/dts/imx6qdl.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl.dtsi
> @@ -650,6 +650,11 @@
>  					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
>  						     <0 20 IRQ_TYPE_LEVEL_HIGH>;
>  				};
> +
> +				snvs-poweroff at 38 {
> +					compatible = "fsl,sec-v4.0-poweroff";
> +					reg = <0x38 0x4>;
> +				};
>  			};
>  
>  			epit1: epit at 020d0000 { /* EPIT1 */
> diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
> index ba67714..6e1d8f6 100644
> --- a/arch/arm/boot/dts/imx6sl.dtsi
> +++ b/arch/arm/boot/dts/imx6sl.dtsi
> @@ -568,6 +568,11 @@
>  					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
>  						     <0 20 IRQ_TYPE_LEVEL_HIGH>;
>  				};
> +
> +				snvs-poweroff at 38 {
> +					compatible = "fsl,sec-v4.0-poweroff";
> +					reg = <0x38 0x4>;
> +				};
>  			};
>  
>  			epit1: epit at 020d0000 {
> diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
> index d137caca..c1f937e 100644
> --- a/arch/arm/boot/dts/imx6sx.dtsi
> +++ b/arch/arm/boot/dts/imx6sx.dtsi
> @@ -671,6 +671,11 @@
>  					reg = <0x34 0x58>;
>  					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
>  				};
> +
> +				snvs-poweroff at 38 {
> +					compatible = "fsl,sec-v4.0-poweroff";
> +					reg = <0x38 0x4>;
> +				};
>  			};
>  
>  			epit1: epit at 020d0000 {
> -- 
> 1.9.1
>