[PATCH - v4] PCI: keystone: add a pci quirk to limit mrrs
Bjorn Helgaas
bhelgaas at google.com
Tue Sep 16 14:54:48 PDT 2014
On Mon, Sep 08, 2014 at 01:03:34PM -0400, Murali Karicheri wrote:
> Keystone PCI controller has a limitation that memory read request
> size must not exceed 256 bytes. This is a hardware limitation and
> add a quirk to force this limit on all downstream devices by
> updating mrrs.
>
> Signed-off-by: Murali Karicheri <m-karicheri2 at ti.com>
Applied to pci/host-keystone for v3.18, thanks.
I moved the pci-keystone.txt update regarding pci=pcie_bus_perf into this
patch. This is where it belongs, isn't it? I'm pretty sure it wasn't
related to setting the PCI device ID dynamically.
> ---
> -v4: re-send removing extra lines
> -v3: added check for vendor id and use pci_matc_id() to do matching
> -v2: made the quirk happens after tuning
> -v1: changed printk to indicate PCI bdf
>
> drivers/pci/host/pci-keystone.c | 45 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 45 insertions(+)
>
> diff --git a/drivers/pci/host/pci-keystone.c b/drivers/pci/host/pci-keystone.c
> index c1cfaef..ff8ed25 100644
> --- a/drivers/pci/host/pci-keystone.c
> +++ b/drivers/pci/host/pci-keystone.c
> @@ -42,8 +42,53 @@
> /* DEV_STAT_CTRL */
> #define PCIE_CAP_BASE 0x70
>
> +/* PCIE controller device IDs */
> +#define PCIE_RC_K2HK 0xb008
> +#define PCIE_RC_K2E 0xb009
> +#define PCIE_RC_K2L 0xb00a
> +
> #define to_keystone_pcie(x) container_of(x, struct keystone_pcie, pp)
>
> +static void quirk_limit_mrrs(struct pci_dev *dev)
> +{
> + struct pci_bus *bus = dev->bus;
> + struct pci_dev *bridge = bus->self;
> + static const struct pci_device_id rc_pci_devids[] = {
> + { PCI_DEVICE(PCI_VENDOR_ID_TI, PCIE_RC_K2HK),
> + .class = PCI_CLASS_BRIDGE_PCI << 8, .class_mask = ~0, },
> + { PCI_DEVICE(PCI_VENDOR_ID_TI, PCIE_RC_K2E),
> + .class = PCI_CLASS_BRIDGE_PCI << 8, .class_mask = ~0, },
> + { PCI_DEVICE(PCI_VENDOR_ID_TI, PCIE_RC_K2L),
> + .class = PCI_CLASS_BRIDGE_PCI << 8, .class_mask = ~0, },
> + { 0, },
> + };
> +
> + if (pci_is_root_bus(bus))
> + return;
> +
> + /* look for the host bridge */
> + while (!pci_is_root_bus(bus)) {
> + bridge = bus->self;
> + bus = bus->parent;
> + }
> +
> + if (bridge) {
> + /*
> + * Keystone PCI controller has a h/w limitation of
> + * 256 bytes maximum read request size. It can't handle
> + * anything higher than this. So force this limit on
> + * all downstream devices
> + */
> + if (pci_match_id(rc_pci_devids, bridge)) {
> + if (pcie_get_readrq(dev) > 256) {
> + dev_info(&dev->dev, "limiting mrrs to 256\n");
> + pcie_set_readrq(dev, 256);
> + }
> + }
> + }
> +}
> +DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, quirk_limit_mrrs);
> +
> static int ks_pcie_establish_link(struct keystone_pcie *ks_pcie)
> {
> struct pcie_port *pp = &ks_pcie->pp;
> --
> 1.7.9.5
>
More information about the linux-arm-kernel
mailing list