[PATCH v6 0/4] APM X-Gene PCIe host controller
Liviu.Dudau at arm.com
Tue Sep 16 09:20:19 PDT 2014
On Sat, Sep 06, 2014 at 03:17:43PM +0100, Bjorn Helgaas wrote:
> On Fri, Sep 5, 2014 at 6:25 PM, Tanmay Inamdar <tinamdar at apm.com> wrote:
> > This patch adds support for AppliedMicro X-Gene PCIe host controller. The
> > driver is tested on X-Gene platform with different gen1/2/3 PCIe endpoint
> > cards.
> > X-Gene PCIe controller driver has depedency on the pcie arm64 arch support.
> > Liviu Dudau from ARM has sent a patch set for pcie arm64 arch support and
> > support for creating generic pcie bridge from device tree. Liviu's patches
> > are available here
> > 1. https://lkml.org/lkml/2014/8/12/361
> I'm hoping to merge Liviu's patches and this X-Gene support for v3.18.
> I'm currently waiting for Liviu's v10 series (hopefully based on
> v3.17-rc2), and since your series depends on that, I'm going to wait
> for a v7 of your series that is rebased on top of Liviu's v10. Does
> that make sense?
Are you happy so far with my v10 and Tanmay's v7? I will try to chase Rob Herring
here at Linaro Connect to see if he is happy with my latest update to the
pci-domain comments, but I would like to know if you think that there is anything
else preventing you from pulling these series.
> > If someone wishes to test PCIe on X-Gene with this patch set, above mentioned
> > patches from Liviu must be applied before the patches in this patch set. Also
> > please use latest xgene u-boot firmware.
> > changes since V5:
> > 1. Port driver to changed interface of 'of_create_pci_host_bridge'
> > 2. Fix the prefetch bit setting
> > 3. Removed bunch of register programming which is already done by firmware
> > changes since V4:
> > 1. fix section mismatch warnings
> > 2. fix the patch description
> > 3. fix indentation
> > 4. update read/write cfg functions by passing both addr and offset.
> > 5. use 'time_before' for timeout.
> > 6. remove unnecessary 'IS_ERR_OR_NULL'. Keep 'IS_ERR' for 'clk_get'
> > 7. remove BUG_ON for pci_ioremap_io.
> > changes since V3:
> > 1. remove 'struct hw_pci' and supporting ops in hw_pci
> > 2. add code to create the host bridge from dts
> > 3. add code to scan the the host bridge
> > 4. modify outbound windows setup function to get resource information from
> > 'bridge->windows'
> > 5. add compatible string in pcie dts node with current X-Gene SOC name.
> > changes since V2:
> > 1. redefined each PCI port in different PCI domain correctly.
> > 2. removed setup_lane and setup_link functions from driver.
> > 3. removed scan_bus wrapper and set_primary_bus hack.
> > 4. added pci_ioremap_io for io resources.
> > changes since V1:
> > 1. added PCI domain support
> > 2. reading cpu and pci addresses from device tree to configure regions.
> > 3. got rid of unnecessary wrappers for readl and writel.
> > 4. got rid of endpoint configuration code.
> > 5. added 'dma-ranges' property support to read inbound region configuration.
> > 6. renamed host driver file to 'pci-xgene.c' from 'pcie-xgene.c'
> > 7. dropped 'clock-names' property from bindings
> > 8. added comments whereever requested.
> > Tanmay Inamdar (4):
> > pci:host: APM X-Gene PCIe controller driver
> > arm64: dts: APM X-Gene PCIe device tree nodes
> > dt-bindings: pci: xgene pcie device tree bindings
> > MAINTAINERS: entry for APM X-Gene PCIe host driver
> > .../devicetree/bindings/pci/xgene-pci.txt | 55 ++
> > MAINTAINERS | 8 +
> > arch/arm64/boot/dts/apm-mustang.dts | 8 +
> > arch/arm64/boot/dts/apm-storm.dtsi | 160 ++++++
> > drivers/pci/host/Kconfig | 10 +
> > drivers/pci/host/Makefile | 1 +
> > drivers/pci/host/pci-xgene.c | 638 +++++++++++++++++++++
> > 7 files changed, 880 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/pci/xgene-pci.txt
> > create mode 100644 drivers/pci/host/pci-xgene.c
> > --
> > 1.9.1
| I would like to |
| fix the world, |
| but they're not |
| giving me the |
\ source code! /
More information about the linux-arm-kernel