[RFC PATCH for AMD Seattle 0/4] Drivers for AMD-Seatlle to boot from ACPI
suravee.suthikulpanit at amd.com
suravee.suthikulpanit at amd.com
Mon Sep 15 17:47:22 PDT 2014
From: Suravee Suthikulpanit <Suravee.Suthikulpanit at amd.com>
As a follow up of the email thread:
[PATCH v3 00/17] Introduce ACPI for ARM64 based on ACPI 5.1
https://lkml.org/lkml/2014/9/1/446
Besides Hanjun Guo's patches above, these are the additional patches required
to boot AMD Seattle platform with full ACPI support:
[PATCH] efi/arm64: efistub: don't abort if base of DRAM is occupied
http://lists.infradead.org/pipermail/linux-arm-kernel/2014-July/272274.html
[PATCH v2] efi/arm64: fix fdt-related memory reservation
https://lkml.org/lkml/2014/9/8/483
[PATCH] ata: ahci_platform: Add ACPI support for AMD Seattle SATA controller
https://lkml.org/lkml/2014/9/9/834
[RFC PATCH for Juno 2/2] tty: SBSA compatible UART
https://lkml.org/lkml/2014/9/1/448
(NOTE: This is not meant to be submitted upstream, but required to enable
ACPI support for UART SBSA driver.)
These patches are rebased from the linux-3.17-rc4 upstream kernel, and
compatible with the AMD Seattle Firmware version ROD0070C.
The full kernel boot log can be found here:
http://people.linaro.org/~al.stone/seattle-boot-acpi-dmesg.txt
Suravee / Al
Ard Biesheuvel (1):
arm64/efi: efistub: don't abort if base of DRAM is occupied
Grame Gregory (1):
[RFC PATCH for Juno 2/2] tty: SBSA compatible UART
Mark Salter (1):
efi/arm64: fix fdt-related memory reservation
Suravee Suthikulpanit (1):
ata: ahci_platform: Add ACPI support for AMD Seattle SATA controller
arch/arm64/kernel/efi-stub.c | 16 +-
arch/arm64/mm/init.c | 3 +-
drivers/ata/Kconfig | 2 +-
drivers/ata/ahci_platform.c | 13 ++
drivers/firmware/efi/libstub/fdt.c | 10 +-
drivers/tty/Kconfig | 6 +
drivers/tty/Makefile | 1 +
drivers/tty/sbsauart.c | 328 +++++++++++++++++++++++++++++++++++++
8 files changed, 365 insertions(+), 14 deletions(-)
create mode 100644 drivers/tty/sbsauart.c
--
1.9.3
More information about the linux-arm-kernel
mailing list