[PATCH v4 11/18] ARM64 / ACPI: Parse MADT for SMP initialization
Hanjun Guo
hanjun.guo at linaro.org
Mon Sep 15 17:01:28 PDT 2014
On 2014年09月15日 15:00, Olof Johansson wrote:
> On Fri, Sep 12, 2014 at 10:00:09PM +0800, Hanjun Guo wrote:
>> MADT contains the information for MPIDR which is essential for
>> SMP initialization, parse the GIC cpu interface structures to
>> get the MPIDR value and map it to cpu_logical_map(), and add
>> enabled cpu with valid MPIDR into cpu_possible_map.
>>
>> ACPI 5.1 only has two explicit methods to boot up SMP, PSCI and
>> Parking protocol, but the Parking protocol is only specified for
>> ARMv7 now, so make PSCI as the only way for the SMP boot protocol
>> before some updates for the ACPI spec or the Parking protocol spec.
>>
>> Signed-off-by: Hanjun Guo <hanjun.guo at linaro.org>
>> Signed-off-by: Tomasz Nowicki <tomasz.nowicki at linaro.org>
>> ---
>> arch/arm64/include/asm/acpi.h | 2 +
>> arch/arm64/include/asm/cpu_ops.h | 1 +
>> arch/arm64/include/asm/smp.h | 5 +-
>> arch/arm64/kernel/acpi.c | 147 +++++++++++++++++++++++++++++++++++++-
>> arch/arm64/kernel/cpu_ops.c | 4 +-
>> arch/arm64/kernel/setup.c | 8 ++-
>> arch/arm64/kernel/smp.c | 2 +-
>> 7 files changed, 160 insertions(+), 9 deletions(-)
>>
>> diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h
>> index ecba671..da8f74a 100644
>> --- a/arch/arm64/include/asm/acpi.h
>> +++ b/arch/arm64/include/asm/acpi.h
>> @@ -51,11 +51,13 @@ static inline bool acpi_has_cpu_in_madt(void)
>> }
>>
>> static inline void arch_fix_phys_package_id(int num, u32 slot) { }
>> +void __init acpi_smp_init_cpus(void);
>>
>> #else
>>
>> static inline bool acpi_psci_present(void) { return false; }
>> static inline bool acpi_psci_use_hvc(void) { return false; }
>> +static inline void acpi_smp_init_cpus(void) { }
>>
>> #endif /* CONFIG_ACPI */
>>
>> diff --git a/arch/arm64/include/asm/cpu_ops.h b/arch/arm64/include/asm/cpu_ops.h
>> index d7b4b38..d149580 100644
>> --- a/arch/arm64/include/asm/cpu_ops.h
>> +++ b/arch/arm64/include/asm/cpu_ops.h
>> @@ -61,6 +61,7 @@ struct cpu_operations {
>> };
>>
>> extern const struct cpu_operations *cpu_ops[NR_CPUS];
>> +const struct cpu_operations *cpu_get_ops(const char *name);
>> extern int __init cpu_read_ops(struct device_node *dn, int cpu);
>> extern void __init cpu_read_bootcpu_ops(void);
>>
>> diff --git a/arch/arm64/include/asm/smp.h b/arch/arm64/include/asm/smp.h
>> index a498f2c..c877adc 100644
>> --- a/arch/arm64/include/asm/smp.h
>> +++ b/arch/arm64/include/asm/smp.h
>> @@ -39,9 +39,10 @@ extern void show_ipi_list(struct seq_file *p, int prec);
>> extern void handle_IPI(int ipinr, struct pt_regs *regs);
>>
>> /*
>> - * Setup the set of possible CPUs (via set_cpu_possible)
>> + * Discover the set of possible CPUs and determine their
>> + * SMP operations.
>> */
>> -extern void smp_init_cpus(void);
>> +extern void of_smp_init_cpus(void);
>>
>> /*
>> * Provide a function to raise an IPI cross call on CPUs in callmap.
>> diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c
>> index 9e1ae37..644b8b8 100644
>> --- a/arch/arm64/kernel/acpi.c
>> +++ b/arch/arm64/kernel/acpi.c
>> @@ -24,6 +24,10 @@
>> #include <linux/bootmem.h>
>> #include <linux/smp.h>
>>
>> +#include <asm/smp_plat.h>
>> +#include <asm/cputype.h>
>> +#include <asm/cpu_ops.h>
>> +
>> int acpi_noirq; /* skip ACPI IRQ initialization */
>> int acpi_disabled;
>> EXPORT_SYMBOL(acpi_disabled);
>> @@ -31,6 +35,8 @@ EXPORT_SYMBOL(acpi_disabled);
>> int acpi_pci_disabled; /* skip ACPI PCI scan and IRQ initialization */
>> EXPORT_SYMBOL(acpi_pci_disabled);
>>
>> +static int enabled_cpus; /* Processors (GICC) with enabled flag in MADT */
>> +
>> /*
>> * __acpi_map_table() will be called before page_init(), so early_ioremap()
>> * or early_memremap() should be called here to for ACPI table mapping.
>> @@ -51,6 +57,131 @@ void __init __acpi_unmap_table(char *map, unsigned long size)
>> early_memunmap(map, size);
>> }
>>
>> +/**
>> + * acpi_map_gic_cpu_interface - generates a logical cpu number
>> + * and map to MPIDR represented by GICC structure
>> + * @mpidr: CPU's hardware id to register, MPIDR represented in MADT
>> + * @enabled: this cpu is enabled or not
>> + *
>> + * Returns the logical cpu number which maps to MPIDR
>> + */
>> +static int acpi_map_gic_cpu_interface(u64 mpidr, u8 enabled)
>> +{
>> + int cpu;
>> +
>> + if (mpidr == INVALID_HWID) {
>> + pr_info("Skip invalid cpu hardware ID\n");
> This message, when showing up in dmesg, will probably mostly just make
> someone scratch their head. Something slightly more descriptive would
> be a good idea.
I agree. how about "Skip MADT cpu entry with invalid MPIDR" ?
>
>> + return -EINVAL;
>> + }
>> +
>> + total_cpus++;
>> + if (!enabled)
>> + return -EINVAL;
>> +
>> + if (enabled_cpus >= NR_CPUS) {
>> + pr_warn("NR_CPUS limit of %d reached, Processor %d/0x%llx ignored.\n",
>> + NR_CPUS, total_cpus, mpidr);
>> + return -EINVAL;
>> + }
>> +
>> + /* No need to check duplicate MPIDRs for the first CPU */
>> + if (enabled_cpus) {
>> + /*
>> + * Duplicate MPIDRs are a recipe for disaster. Scan
>> + * all initialized entries and check for
>> + * duplicates. If any is found just ignore the CPU.
>> + */
> But is it this entry or the other one that should be ignored?
Only this entry will be ignored, I did the same thing as DT parsing
CPU nodes.
> Is
> this expected to be something that firmware vendors get wrong all the
> time? Would it be better to abort SMP alltogether?
I think we can still boot other CPUs with correct MPIDRs, and ignore
the wrong ones.
>
>> + for_each_possible_cpu(cpu) {
>> + if (cpu_logical_map(cpu) == mpidr) {
>> + pr_err("Firmware bug, duplicate CPU MPIDR: 0x%llx in MADT\n",
>> + mpidr);
> Misindented.
Will update.
>
>> + return -EINVAL;
>> + }
>> + }
>> +
>> + /* allocate a logical cpu id for the new comer */
>> + cpu = cpumask_next_zero(-1, cpu_possible_mask);
>> + } else {
>> + /* First GICC entry must be BSP as ACPI spec said */
> "spec said", would be nice to have a chapter/section reference.
ok.
>
>> + if (cpu_logical_map(0) != mpidr) {
>> + pr_err("First GICC entry with MPIDR 0x%llx is not BSP\n",
>> + mpidr);
> Same thing here about usefulness of error message. What is a user to do with this?
I'm using this to debug the MADT table in UEFI, and correct them if this printed.
>
>> + return -EINVAL;
>> + }
>> +
>> + /*
>> + * boot_cpu_init() already hold bit 0 in cpu_present_mask
>> + * for BSP, no need to allocate again.
>> + */
>> + cpu = 0;
>> + }
>> +
>> + /* CPU 0 was already initialized */
>> + if (cpu) {
>> + cpu_ops[cpu] = cpu_get_ops(acpi_psci_present() ? "psci" : NULL);
>> + if (!cpu_ops[cpu])
>> + return -EINVAL;
>> +
>> + if (cpu_ops[cpu]->cpu_init(NULL, cpu))
>> + return -EOPNOTSUPP;
>> +
>> + /* map the logical cpu id to cpu MPIDR */
>> + cpu_logical_map(cpu) = mpidr;
>> +
>> + set_cpu_possible(cpu, true);
>> + } else {
>> + /* get cpu0's ops, no need to return if ops is null */
>> + cpu_ops[0] = cpu_get_ops(acpi_psci_present() ? "psci" : NULL);
>> + }
>> +
>> + enabled_cpus++;
>> + return cpu;
>> +}
>> +
>> +static int __init
>> +acpi_parse_gic_cpu_interface(struct acpi_subtable_header *header,
>> + const unsigned long end)
>> +{
>> + struct acpi_madt_generic_interrupt *processor;
>> +
>> + processor = (struct acpi_madt_generic_interrupt *)header;
>> +
>> + if (BAD_MADT_ENTRY(processor, end))
>> + return -EINVAL;
>> +
>> + acpi_table_print_madt_entry(header);
>> +
>> + acpi_map_gic_cpu_interface(processor->arm_mpidr & MPIDR_HWID_BITMASK,
>> + processor->flags & ACPI_MADT_ENABLED);
>> +
>> + return 0;
>> +}
>> +
>> +/* Parse GIC cpu interface entries in MADT for SMP init */
>> +void __init acpi_smp_init_cpus(void)
>> +{
>> + int count;
>> +
>> + /*
>> + * do a partial walk of MADT to determine how many CPUs
>> + * we have including disabled CPUs, and get information
>> + * we need for SMP init
>> + */
>> + count = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_INTERRUPT,
>> + acpi_parse_gic_cpu_interface, 0);
>> +
>> + if (!count) {
>> + pr_err("No GIC CPU interface entries present\n");
>> + return;
>> + } else if (count < 0) {
>> + pr_err("Error parsing GIC CPU interface entry\n");
>> + return;
>> + }
>> +
>> + /* Make boot-up look pretty */
>> + pr_info("%d CPUs enabled, %d CPUs total\n", enabled_cpus, total_cpus);
>> +}
>> +
>> static int __init acpi_parse_fadt(struct acpi_table_header *table)
>> {
>> struct acpi_table_fadt *fadt = (struct acpi_table_fadt *)table;
>> @@ -62,8 +193,20 @@ static int __init acpi_parse_fadt(struct acpi_table_header *table)
>> * to get arm boot flags, or we will disable ACPI.
>> */
>> if (table->revision > 5 ||
>> - (table->revision == 5 && fadt->minor_revision >= 1))
>> - return 0;
>> + (table->revision == 5 && fadt->minor_revision >= 1)) {
>> + /*
>> + * ACPI 5.1 only has two explicit methods to boot up SMP,
>> + * PSCI and Parking protocol, but the Parking protocol is
>> + * only specified for ARMv7 now, so make PSCI as the only
>> + * way for the SMP boot protocol before some updates for
>> + * the ACPI spec or the Parking protocol spec.
>> + */
>> + if (acpi_psci_present())
>> + return 0;
>> +
>> + pr_warn("has no PSCI support, will not bring up secondary CPUs\n");
> s/has//
>
>> + return -EOPNOTSUPP;
>> + }
>>
>> pr_warn("Unsupported FADT revision %d.%d, should be 5.1+, will disable ACPI\n",
>> table->revision, fadt->minor_revision);
>> diff --git a/arch/arm64/kernel/cpu_ops.c b/arch/arm64/kernel/cpu_ops.c
>> index cce9524..1a04deb 100644
>> --- a/arch/arm64/kernel/cpu_ops.c
>> +++ b/arch/arm64/kernel/cpu_ops.c
>> @@ -27,7 +27,7 @@ extern const struct cpu_operations cpu_psci_ops;
>>
>> const struct cpu_operations *cpu_ops[NR_CPUS];
>>
>> -static const struct cpu_operations *supported_cpu_ops[] __initconst = {
>> +static const struct cpu_operations *supported_cpu_ops[] = {
>> #ifdef CONFIG_SMP
>> &smp_spin_table_ops,
>> #endif
>> @@ -35,7 +35,7 @@ static const struct cpu_operations *supported_cpu_ops[] __initconst = {
>> NULL,
>> };
>>
>> -static const struct cpu_operations * __init cpu_get_ops(const char *name)
>> +const struct cpu_operations *cpu_get_ops(const char *name)
>> {
>> const struct cpu_operations **ops = supported_cpu_ops;
>>
>> diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
>> index 7ba20d4..281fa34 100644
>> --- a/arch/arm64/kernel/setup.c
>> +++ b/arch/arm64/kernel/setup.c
>> @@ -60,6 +60,7 @@
>> #include <asm/memblock.h>
>> #include <asm/psci.h>
>> #include <asm/efi.h>
>> +#include <asm/acpi.h>
>>
>> unsigned int processor_id;
>> EXPORT_SYMBOL(processor_id);
>> @@ -401,13 +402,16 @@ void __init setup_arch(char **cmdline_p)
>> if (acpi_disabled) {
>> unflatten_device_tree();
>> psci_dt_init();
>> + cpu_read_bootcpu_ops();
>> +#ifdef CONFIG_SMP
>> + of_smp_init_cpus();
>> +#endif
> Please create a !SMP stub so you can do without the ifdef here, just
> like you did for the ACPI case.
I like this, will update the patch. :)
Thanks
Hanjun
More information about the linux-arm-kernel
mailing list