[PATCH 8/8] arm: mach-u300: Convert pr_warning to pr_warn
Joe Perches
joe at perches.com
Sat Sep 13 11:31:19 PDT 2014
Use the more common pr_warn.
Other miscellanea:
o Coalesce formats
o Realign arguments
o typo fixes of Siple to Simple
Signed-off-by: Joe Perches <joe at perches.com>
---
arch/arm/mach-u300/dummyspichip.c | 65 +++++++++++++++++----------------------
1 file changed, 29 insertions(+), 36 deletions(-)
diff --git a/arch/arm/mach-u300/dummyspichip.c b/arch/arm/mach-u300/dummyspichip.c
index ec0283c..1319968 100644
--- a/arch/arm/mach-u300/dummyspichip.c
+++ b/arch/arm/mach-u300/dummyspichip.c
@@ -80,8 +80,8 @@ static ssize_t dummy_looptest(struct device *dev,
"in 8bit mode\n");
status = spi_w8r8(spi, 0xAA);
if (status < 0)
- pr_warning("Siple test 1: FAILURE: spi_write_then_read "
- "failed with status %d\n", status);
+ pr_warn("Simple test 1: FAILURE: spi_write_then_read failed with status %d\n",
+ status);
else
pr_info("Simple test 1: SUCCESS!\n");
@@ -89,8 +89,8 @@ static ssize_t dummy_looptest(struct device *dev,
"in 8bit mode (full FIFO)\n");
status = spi_write_then_read(spi, &txbuf[0], 8, &rxbuf[0], 8);
if (status < 0)
- pr_warning("Simple test 2: FAILURE: spi_write_then_read() "
- "failed with status %d\n", status);
+ pr_warn("Simple test 2: FAILURE: spi_write_then_read() failed with status %d\n",
+ status);
else
pr_info("Simple test 2: SUCCESS!\n");
@@ -98,8 +98,8 @@ static ssize_t dummy_looptest(struct device *dev,
"in 8bit mode (see if we overflow FIFO)\n");
status = spi_write_then_read(spi, &txbuf[0], 14, &rxbuf[0], 14);
if (status < 0)
- pr_warning("Simple test 3: FAILURE: failed with status %d "
- "(probably FIFO overrun)\n", status);
+ pr_warn("Simple test 3: FAILURE: failed with status %d (probably FIFO overrun)\n",
+ status);
else
pr_info("Simple test 3: SUCCESS!\n");
@@ -107,14 +107,14 @@ static ssize_t dummy_looptest(struct device *dev,
"bytes garbage with spi_read() in 8bit mode\n");
status = spi_write(spi, &txbuf[0], 8);
if (status < 0)
- pr_warning("Simple test 4 step 1: FAILURE: spi_write() "
- "failed with status %d\n", status);
+ pr_warn("Simple test 4 step 1: FAILURE: spi_write() failed with status %d\n",
+ status);
else
pr_info("Simple test 4 step 1: SUCCESS!\n");
status = spi_read(spi, &rxbuf[0], 8);
if (status < 0)
- pr_warning("Simple test 4 step 2: FAILURE: spi_read() "
- "failed with status %d\n", status);
+ pr_warn("Simple test 4 step 2: FAILURE: spi_read() failed with status %d\n",
+ status);
else
pr_info("Simple test 4 step 2: SUCCESS!\n");
@@ -122,16 +122,14 @@ static ssize_t dummy_looptest(struct device *dev,
"14 bytes garbage with spi_read() in 8bit mode\n");
status = spi_write(spi, &txbuf[0], 14);
if (status < 0)
- pr_warning("Simple test 5 step 1: FAILURE: spi_write() "
- "failed with status %d (probably FIFO overrun)\n",
- status);
+ pr_warn("Simple test 5 step 1: FAILURE: spi_write() failed with status %d (probably FIFO overrun)\n",
+ status);
else
pr_info("Simple test 5 step 1: SUCCESS!\n");
status = spi_read(spi, &rxbuf[0], 14);
if (status < 0)
- pr_warning("Simple test 5 step 2: FAILURE: spi_read() "
- "failed with status %d (probably FIFO overrun)\n",
- status);
+ pr_warn("Simple test 5 step 2: FAILURE: spi_read() failed with status %d (probably FIFO overrun)\n",
+ status);
else
pr_info("Simple test 5: SUCCESS!\n");
@@ -140,16 +138,14 @@ static ssize_t dummy_looptest(struct device *dev,
DMA_TEST_SIZE, DMA_TEST_SIZE);
status = spi_write(spi, &bigtxbuf_virtual[0], DMA_TEST_SIZE);
if (status < 0)
- pr_warning("Simple test 6 step 1: FAILURE: spi_write() "
- "failed with status %d (probably FIFO overrun)\n",
- status);
+ pr_warn("Simple test 6 step 1: FAILURE: spi_write() failed with status %d (probably FIFO overrun)\n",
+ status);
else
pr_info("Simple test 6 step 1: SUCCESS!\n");
status = spi_read(spi, &bigrxbuf_virtual[0], DMA_TEST_SIZE);
if (status < 0)
- pr_warning("Simple test 6 step 2: FAILURE: spi_read() "
- "failed with status %d (probably FIFO overrun)\n",
- status);
+ pr_warn("Simple test 6 step 2: FAILURE: spi_read() failed with status %d (probably FIFO overrun)\n",
+ status);
else
pr_info("Simple test 6: SUCCESS!\n");
@@ -169,18 +165,17 @@ static ssize_t dummy_looptest(struct device *dev,
pr_info("Simple test 7: SUCCESS! (expected failure with "
"status EIO)\n");
else if (status < 0)
- pr_warning("Siple test 7: FAILURE: spi_write_then_read "
- "failed with status %d\n", status);
+ pr_warn("Simple test 7: FAILURE: spi_write_then_read failed with status %d\n",
+ status);
else
- pr_warning("Siple test 7: FAILURE: spi_write_then_read "
- "succeeded but it was expected to fail!\n");
+ pr_warn("Simple test 7: FAILURE: spi_write_then_read succeeded but it was expected to fail!\n");
pr_info("Simple test 8: write 8 bytes, read back 8 bytes garbage "
"in 16bit mode (full FIFO)\n");
status = spi_write_then_read(spi, &txbuf[0], 8, &rxbuf[0], 8);
if (status < 0)
- pr_warning("Simple test 8: FAILURE: spi_write_then_read() "
- "failed with status %d\n", status);
+ pr_warn("Simple test 8: FAILURE: spi_write_then_read() failed with status %d\n",
+ status);
else
pr_info("Simple test 8: SUCCESS!\n");
@@ -188,8 +183,8 @@ static ssize_t dummy_looptest(struct device *dev,
"in 16bit mode (see if we overflow FIFO)\n");
status = spi_write_then_read(spi, &txbuf[0], 14, &rxbuf[0], 14);
if (status < 0)
- pr_warning("Simple test 9: FAILURE: failed with status %d "
- "(probably FIFO overrun)\n", status);
+ pr_warn("Simple test 9: FAILURE: failed with status %d (probably FIFO overrun)\n",
+ status);
else
pr_info("Simple test 9: SUCCESS!\n");
@@ -198,17 +193,15 @@ static ssize_t dummy_looptest(struct device *dev,
DMA_TEST_SIZE, DMA_TEST_SIZE);
status = spi_write(spi, &bigtxbuf_virtual[0], DMA_TEST_SIZE);
if (status < 0)
- pr_warning("Simple test 10 step 1: FAILURE: spi_write() "
- "failed with status %d (probably FIFO overrun)\n",
- status);
+ pr_warn("Simple test 10 step 1: FAILURE: spi_write() failed with status %d (probably FIFO overrun)\n",
+ status);
else
pr_info("Simple test 10 step 1: SUCCESS!\n");
status = spi_read(spi, &bigrxbuf_virtual[0], DMA_TEST_SIZE);
if (status < 0)
- pr_warning("Simple test 10 step 2: FAILURE: spi_read() "
- "failed with status %d (probably FIFO overrun)\n",
- status);
+ pr_warn("Simple test 10 step 2: FAILURE: spi_read() failed with status %d (probably FIFO overrun)\n",
+ status);
else
pr_info("Simple test 10: SUCCESS!\n");
--
1.8.1.2.459.gbcd45b4.dirty
More information about the linux-arm-kernel
mailing list