[PATCH v3 5/8] rtc: at91sam9: make use of syscon/regmap to access GPBR registers

[Johan Hovold]

On Thu, Sep 11, 2014 at 10:56:04AM +0200, Boris BREZILLON wrote:
> The GPBR registers are not part of the RTT block and thus should not be
> defined in the reg property of the rtt node.
> 
> Use syscon to provide a proper DT representation and reference the GPBR
> syscon device in a new "atmel,time-reg" property which store both the
> syscon device phandle and the register offset within the GPBR block.
> 
> When using non DT boards, we won't be able to retrieve the syscon regmap,
> hence we need to create our own regmap using the memory region defined
> in the 2nd memory resource assigned to the RTT platform device.
> 
> Signed-off-by: Boris BREZILLON <boris.brezillon at free-electrons.com>
> 
> Conflicts:
> 	drivers/rtc/rtc-at91sam9.c

You probably don't want this here.

> ---
>  drivers/rtc/Kconfig        |  1 +
>  drivers/rtc/rtc-at91sam9.c | 58 +++++++++++++++++++++++++++++++++++++++-------
>  2 files changed, 50 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
> index a168e96..7d76da8 100644
> --- a/drivers/rtc/Kconfig
> +++ b/drivers/rtc/Kconfig
> @@ -1081,6 +1081,7 @@ config RTC_DRV_AT91RM9200
>  config RTC_DRV_AT91SAM9
>  	tristate "AT91SAM9x/AT91CAP9 RTT as RTC"
>  	depends on ARCH_AT91 && !(ARCH_AT91RM9200 || ARCH_AT91X40)
> +	select MFD_SYSCON
>  	help
>  	  RTC driver for the Atmel AT91SAM9x and AT91CAP9 internal RTT
>  	  (Real Time Timer). These timers are powered by the backup power
> diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c
> index d72c34d..b953545 100644
> --- a/drivers/rtc/rtc-at91sam9.c
> +++ b/drivers/rtc/rtc-at91sam9.c
> @@ -21,6 +21,8 @@
>  #include <linux/slab.h>
>  #include <linux/platform_data/atmel.h>
>  #include <linux/io.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/regmap.h>
>  
>  /*
>   * This driver uses two configurable hardware resources that live in the
> @@ -72,7 +74,8 @@ struct sam9_rtc {
>  	void __iomem		*rtt;
>  	struct rtc_device	*rtcdev;
>  	u32			imr;
> -	void __iomem		*gpbr;
> +	struct regmap		*gpbr;
> +	unsigned int		gpbr_offset;
>  	int 			irq;
>  };
>  
> @@ -81,10 +84,18 @@ struct sam9_rtc {
>  #define rtt_writel(rtc, field, val) \
>  	writel((val), (rtc)->rtt + AT91_RTT_ ## field)
>  
> -#define gpbr_readl(rtc) \
> -	readl((rtc)->gpbr)
> -#define gpbr_writel(rtc, val) \
> -	writel((val), (rtc)->gpbr)
> +static inline unsigned int gpbr_readl(struct sam9_rtc *rtc) {

Brace placement. Did you run checkpatch on the rest of the series?

Johan