[PATCH v3] iio: adc: at91: don't use the last converted data register

[Nicolas Ferre]

On 10/09/2014 16:02, Ludovic Desroches :
> If touchscreen mode is enabled and a conversion is requested on another
> channel, the result in the last converted data register can be a
> touchscreen relative value. Starting a conversion involves to do a
> conversion for all active channel. It starts with ADC channels and ends
> with touchscreen channels. Then if ADC_LCD register is not read quickly,
> its content may be a touchscreen conversion.
> To remove this temporal constraint, the conversion value is taken from
> the channel data register.
> 
> Acked-by: Alexandre Belloni <alexandre.belloni at free-electrons.com>
> Signed-off-by: Ludovic Desroches <ludovic.desroches at atmel.com>

Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>

> ---
> 
> Changes from v2:
> - fix GENMASK indexes
> 
> Changes from v1:
> - use GENMASK and BIT macros
> 
>  drivers/iio/adc/at91_adc.c |   12 +++++++-----
>  1 file changed, 7 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
> index 3b5bacd..ad51808 100644
> --- a/drivers/iio/adc/at91_adc.c
> +++ b/drivers/iio/adc/at91_adc.c
> @@ -196,6 +196,7 @@ struct at91_adc_state {
>  	bool			done;
>  	int			irq;
>  	u16			last_value;
> +	int			chnb;
>  	struct mutex		lock;
>  	u8			num_channels;
>  	void __iomem		*reg_base;
> @@ -274,7 +275,7 @@ void handle_adc_eoc_trigger(int irq, struct iio_dev *idev)
>  		disable_irq_nosync(irq);
>  		iio_trigger_poll(idev->trig, iio_get_time_ns());
>  	} else {
> -		st->last_value = at91_adc_readl(st, AT91_ADC_LCDR);
> +		st->last_value = at91_adc_readl(st, AT91_ADC_CHAN(st, st->chnb));
>  		st->done = true;
>  		wake_up_interruptible(&st->wq_data_avail);
>  	}
> @@ -351,7 +352,7 @@ static irqreturn_t at91_adc_rl_interrupt(int irq, void *private)
>  	unsigned int reg;
>  
>  	status &= at91_adc_readl(st, AT91_ADC_IMR);
> -	if (status & st->registers->drdy_mask)
> +	if (status & GENMASK(st->num_channels - 1, 0))
>  		handle_adc_eoc_trigger(irq, idev);
>  
>  	if (status & AT91RL_ADC_IER_PEN) {
> @@ -418,7 +419,7 @@ static irqreturn_t at91_adc_9x5_interrupt(int irq, void *private)
>  		AT91_ADC_IER_YRDY |
>  		AT91_ADC_IER_PRDY;
>  
> -	if (status & st->registers->drdy_mask)
> +	if (status & GENMASK(st->num_channels - 1, 0))
>  		handle_adc_eoc_trigger(irq, idev);
>  
>  	if (status & AT91_ADC_IER_PEN) {
> @@ -689,9 +690,10 @@ static int at91_adc_read_raw(struct iio_dev *idev,
>  	case IIO_CHAN_INFO_RAW:
>  		mutex_lock(&st->lock);
>  
> +		st->chnb = chan->channel;
>  		at91_adc_writel(st, AT91_ADC_CHER,
>  				AT91_ADC_CH(chan->channel));
> -		at91_adc_writel(st, AT91_ADC_IER, st->registers->drdy_mask);
> +		at91_adc_writel(st, AT91_ADC_IER, BIT(chan->channel));
>  		at91_adc_writel(st, AT91_ADC_CR, AT91_ADC_START);
>  
>  		ret = wait_event_interruptible_timeout(st->wq_data_avail,
> @@ -708,7 +710,7 @@ static int at91_adc_read_raw(struct iio_dev *idev,
>  
>  		at91_adc_writel(st, AT91_ADC_CHDR,
>  				AT91_ADC_CH(chan->channel));
> -		at91_adc_writel(st, AT91_ADC_IDR, st->registers->drdy_mask);
> +		at91_adc_writel(st, AT91_ADC_IDR, BIT(chan->channel));
>  
>  		st->last_value = 0;
>  		st->done = false;
> 


-- 
Nicolas Ferre