[PATCH v1] ARM: dts: imx6dl: disable dma support for spi on i.mx6dl

[Shawn Guo]

On Wed, Sep 10, 2014 at 09:33:36AM +0800, Robin Gong wrote:
> There is one weird data in rxfifo after one full rx/tx transfer
> done sometimes. It looks a design issue and hard to workaround
> totally, so disable dma functhion here. And will re-enable it
> once the root cause found.
> 
> Signed-off-by: Robin Gong <b38343 at freescale.com>
> ---
>  arch/arm/boot/dts/imx6dl.dtsi | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
> index b453e0e..e84a1ff 100644
> --- a/arch/arm/boot/dts/imx6dl.dtsi
> +++ b/arch/arm/boot/dts/imx6dl.dtsi
> @@ -102,6 +102,22 @@
>  	};
>  };
>  
> +&ecspi1 {
> +	dma-names = "", "";
> +};
> +
> +&ecspi2 {
> +	dma-names = "", "";
> +};
> +
> +&ecspi3 {
> +	dma-names = "", "";
> +};
> +
> +&ecspi4 {
> +	dma-names = "", "";
> +};
> +

This looks odd.  Can we drop the dma properties from imx6qdl.dtsi,
and only add them in imx6q.dtsi instead?

Shawn

>  &hdmi {
>  	compatible = "fsl,imx6dl-hdmi";
>  };
> -- 
> 1.9.1
>