[PATCH] ARM: dts: imx6qdl-sabresd: Configure the pins locally

[Shawn Guo]

On Fri, Sep 05, 2014 at 09:46:10AM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam at freescale.com>
> 
> Passing '0x80000000' to the pin configuration means that kernel will skip the
> IOMUXC_SW_PAD_CTL configuration and will use whathever values come from the 
> bootloader.
> 
> Instead of relying on the bootloader setup, let's configure it in the kernel to
> have predictable settings.
> 
> '0x1b0b0' is the default POR value for all these pins and has also been verified
> that the pins are using this value by manually inspecting the IOMUXC_SW_PAD_CTL
> registers, so no functional change has been made.

Just to ensure I get it right, you verified the setting for all those
pins by inspecting a running kernel, right?

Shawn

> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---
>  arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 26 +++++++++++++-------------
>  1 file changed, 13 insertions(+), 13 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> index 07fb302..baf2f00 100644
> --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> @@ -327,15 +327,15 @@
>  	imx6qdl-sabresd {
>  		pinctrl_hog: hoggrp {
>  			fsl,pins = <
> -				MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x80000000
> -				MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x80000000
> -				MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000
> -				MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x80000000
> +				MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
> +				MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
> +				MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
> +				MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
>  				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
> -				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x80000000
> -				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
> -				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x80000000
> -				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000
> +				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0
> +				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
> +				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x1b0b0
> +				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
>  			>;
>  		};
>  
> @@ -380,9 +380,9 @@
>  
>  		pinctrl_gpio_keys: gpio_keysgrp {
>  			fsl,pins = <
> -				MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x80000000
> -				MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x80000000
> -				MX6QDL_PAD_GPIO_5__GPIO1_IO05  0x80000000
> +				MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
> +				MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x1b0b0
> +				MX6QDL_PAD_GPIO_5__GPIO1_IO05  0x1b0b0
>  			>;
>  		};
>  
> @@ -409,7 +409,7 @@
>  
>  		pinctrl_pcie: pciegrp {
>  			fsl,pins = <
> -				MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x80000000
> +				MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b0b0
>  			>;
>  		};
>  
> @@ -487,7 +487,7 @@
>  	gpio_leds {
>  		pinctrl_gpio_leds: gpioledsgrp {
>  			fsl,pins = <
> -				MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000
> +				MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
>  			>;
>  		};
>  	};
> -- 
> 1.9.1
>