[PATCHv3 1/6] ARM: dts: Add SoC level device tree support for LS1021A

[Arnd Bergmann]

On Tuesday 09 September 2014 17:12:27 Jingchang Lu wrote:
> +       aliases {
> +               serial0 = &lpuart0;
> +               serial1 = &lpuart1;
> +               serial2 = &lpuart2;
> +               serial3 = &lpuart3;
> +               serial4 = &lpuart4;
> +               serial5 = &lpuart5;
> +               ethernet0 = &enet0;
> +               ethernet1 = &enet1;
> +               ethernet2 = &enet2;
> +               sysclk = &sysclk;
> +       };
> +
> +       memory at 80000000 {
> +               device_type = "memory";
> +               reg = <0x0 0x80000000 0x0 0x20000000>;
> +       };
> +
> 


One more thing: these should all go into the board specific files.

The installed memory is almost always a property of the board, not the
SoC, and a lot of boards only connect a subset of the serial ports,
or they may have them in a different order.

In particular, you only provide aliases for the six out of the
ten available uarts, which seems arbitrary.

	Arnd