[PATCH 1/4] ARM: dts: imx28-tx28: remove spidev labels and add third instance of spidev

[Lothar Waßmann]

The labels on the spidev nodes are not used and not required, so
remove them. The TX28 supports 3 chipselects on the SPI
interface. Make all those chipselects available to the user.

Signed-off-by: Lothar Waßmann <LW at KARO-electronics.de>
---
 arch/arm/boot/dts/imx28-tx28.dts |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index f947fbb..4e790c2 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -619,17 +619,23 @@
 	clock-frequency = <57600000>;
 	status = "okay";
 
-	spidev0: spi at 0 {
+	spi at 0 {
 		compatible = "spidev";
 		reg = <0>;
 		spi-max-frequency = <57600000>;
 	};
 
-	spidev1: spi at 1 {
+	spi at 1 {
 		compatible = "spidev";
 		reg = <1>;
 		spi-max-frequency = <57600000>;
 	};
+
+	spi at 2 {
+		compatible = "spidev";
+		reg = <2>;
+		spi-max-frequency = <57600000>;
+	};
 };
 
 &usb0 {
-- 
1.7.10.4