[PATCHv3 2/6] ARM: dts: Add initial LS1021A QDS board dts support
Jingchang Lu
jingchang.lu at freescale.com
Tue Sep 9 02:12:28 PDT 2014
From: Jingchang Lu <b35083 at freescale.com>
Signed-off-by: Alison Wang <alison.wang at freescale.com>
Signed-off-by: Chao Fu <B44548 at freescale.com>
Signed-off-by: Jason Jin <Jason.Jin at freescale.com>
Signed-off-by: Xiubo Li <Li.Xiubo at freescale.com>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma at freescale.com>
Signed-off-by: Jaiprakash Singh <b44839 at freescale.com>
Signed-off-by: Jingchang Lu <jingchang.lu at freescale.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/ls1021a-qds.dts | 285 ++++++++++++++++++++++++++++++++++++++
2 files changed, 286 insertions(+)
create mode 100644 arch/arm/boot/dts/ls1021a-qds.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 75c7b74..d2609c4 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -245,6 +245,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
imx6q-tx6q-1110.dtb \
imx6sl-evk.dtb \
imx6sx-sdb.dtb \
+ ls1021a-qds.dtb \
vf610-colibri-eval-v3.dtb \
vf610-cosmic.dtb \
vf610-twr.dtb
diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
new file mode 100644
index 0000000..a0a95f5
--- /dev/null
+++ b/arch/arm/boot/dts/ls1021a-qds.dts
@@ -0,0 +1,285 @@
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "ls1021a.dtsi"
+
+/ {
+ model = "LS1021A QDS Board";
+
+ aliases {
+ enet0_rgmii_phy = &rgmii_phy1;
+ enet1_rgmii_phy = &rgmii_phy2;
+ enet2_rgmii_phy = &rgmii_phy3;
+ enet0_sgmii_phy = &sgmii_phy1c;
+ enet1_sgmii_phy = &sgmii_phy1d;
+ };
+
+ soc {
+ leds {
+ compatible = "pwm-leds";
+ led0 {
+ label = "led0";
+ pwms = <&pwm3 0 150000 0>;
+ max-brightness = <100>;
+ };
+ led1 {
+ label = "led1";
+ pwms = <&pwm3 1 150000 0>;
+ max-brightness = <100>;
+ };
+ led2 {
+ label = "led2";
+ pwms = <&pwm3 2 150000 0>;
+ max-brightness = <100>;
+ };
+ led3 {
+ label = "led3";
+ pwms = <&pwm3 3 150000 0>;
+ max-brightness = <100>;
+ };
+ led4 {
+ label = "led4";
+ pwms = <&pwm3 4 150000 0>;
+ max-brightness = <100>;
+ };
+ led5 {
+ label = "led5";
+ pwms = <&pwm3 5 150000 0>;
+ max-brightness = <100>;
+ };
+ led6 {
+ label = "led6";
+ pwms = <&pwm3 6 150000 0>;
+ max-brightness = <100>;
+ };
+ led7 {
+ label = "led7";
+ pwms = <&pwm3 7 150000 0>;
+ max-brightness = <100>;
+ };
+ };
+ };
+};
+
+&dspi0 {
+ bus-num = <0>;
+ status = "okay";
+
+ dspiflash: at45db021d at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at45db021d", "atmel,at45", "atmel,dataflash";
+ spi-max-frequency = <16000000>;
+ spi-cpol;
+ spi-cpha;
+ reg = <0>;
+ };
+};
+
+&enet0 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&sgmii_phy1c>;
+ phy-connection-type = "sgmii";
+ status = "okay";
+};
+
+&enet1 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&sgmii_phy1d>;
+ phy-connection-type = "sgmii";
+ status = "okay";
+};
+
+&enet2 {
+ phy-handle = <&rgmii_phy3>;
+ phy-connection-type = "rgmii-id";
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ pca9547 at 77 {
+ compatible = "philips,pca9547";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+
+ rtc at 68 {
+ compatible = "dallas,ds3232";
+ reg = <0x68>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+
+ ina220 at 40 {
+ compatible = "ti,ina220";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+
+ ina220 at 41 {
+ compatible = "ti,ina220";
+ reg = <0x41>;
+ shunt-resistor = <1000>;
+ };
+ };
+
+ i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+
+ eeprom at 56 {
+ compatible = "at24,24c512";
+ reg = <0x56>;
+ };
+
+ eeprom at 57 {
+ compatible = "at24,24c512";
+ reg = <0x57>;
+ };
+
+ adt7461a at 4c {
+ compatible = "adt7461a";
+ reg = <0x4c>;
+ };
+ };
+
+ i2c at 4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4>;
+ };
+ };
+};
+
+&ifc {
+ status = "okay";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ /* NOR, NAND Flashes and FPGA on board */
+ ranges = <0x0 0x0 0x0 0x60000000 0x08000000
+ 0x2 0x0 0x0 0x7e800000 0x00010000
+ 0x3 0x0 0x0 0x7fb00000 0x00000100>;
+
+ nor at 0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ nand at 2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,ifc-nand";
+ reg = <0x2 0x0 0x10000>;
+ };
+
+ fpga: board-control at 3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ reg = <0x3 0x0 0x0000100>;
+ bank-width = <1>;
+ device-width = <1>;
+ ranges = <0 3 0 0x100>;
+
+ mdio-mux-emi1 {
+ compatible = "mdio-mux-mmioreg";
+ mdio-parent-bus = <&mdio0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x54 1>; /* BRDCFG4 */
+ mux-mask = <0xe0>; /* EMI1[2:0] */
+
+ /* Onboard PHYs */
+ ls1021amdio0: mdio at 0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ rgmii_phy1: ethernet-phy at 1 {
+ reg = <0x1>;
+ };
+ };
+ ls1021amdio1: mdio at 20 {
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ rgmii_phy2: ethernet-phy at 2 {
+ reg = <0x2>;
+ };
+ };
+ ls1021amdio2: mdio at 40 {
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ rgmii_phy3: ethernet-phy at 3 {
+ reg = <0x3>;
+ };
+ };
+ ls1021amdio3: mdio at 60 {
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ sgmii_phy1c: ethernet-phy at 1c {
+ reg = <0x1c>;
+ };
+ };
+ ls1021amdio4: mdio at 80 {
+ reg = <0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ sgmii_phy1d: ethernet-phy at 1d {
+ reg = <0x1d>;
+ };
+ };
+ };
+ };
+};
+
+&lpuart0 {
+ status = "okay";
+};
+
+&mdio0 {
+ tbi0: tbi-phy at 8 {
+ reg = <0x8>;
+ device_type = "tbi-phy";
+ };
+};
+
+&pwm3 {
+ status = "okay";
+};
+
+&pwm7 {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
--
1.8.0
More information about the linux-arm-kernel
mailing list