[PATCH V1 2/3] ARM: dts: imx6qdl: add baud clock and clock-names for ssi

[Shengjiu Wang]

Baud clock is used for bit clock generation in master mode. Ipg clock
is peripheral clock and peripheral access clock.

Signed-off-by: Shengjiu Wang <shengjiu.wang at freescale.com>
---
 arch/arm/boot/dts/imx6qdl.dtsi |   12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 70d7207..0de8806 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -280,7 +280,9 @@
 							"fsl,imx51-ssi";
 					reg = <0x02028000 0x4000>;
 					interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6QDL_CLK_SSI1_IPG>;
+					clocks = <&clks IMX6QDL_CLK_SSI1_IPG>,
+						 <&clks IMX6QDL_CLK_SSI1>;
+					clock-names = "ipg", "baud";
 					dmas = <&sdma 37 1 0>,
 					       <&sdma 38 1 0>;
 					dma-names = "rx", "tx";
@@ -294,7 +296,9 @@
 							"fsl,imx51-ssi";
 					reg = <0x0202c000 0x4000>;
 					interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6QDL_CLK_SSI2_IPG>;
+					clocks = <&clks IMX6QDL_CLK_SSI2_IPG>,
+						 <&clks IMX6QDL_CLK_SSI2>;
+					clock-names = "ipg", "baud";
 					dmas = <&sdma 41 1 0>,
 					       <&sdma 42 1 0>;
 					dma-names = "rx", "tx";
@@ -308,7 +312,9 @@
 							"fsl,imx51-ssi";
 					reg = <0x02030000 0x4000>;
 					interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6QDL_CLK_SSI3_IPG>;
+					clocks = <&clks IMX6QDL_CLK_SSI3_IPG>,
+						 <&clks IMX6QDL_CLK_SSI3>;
+					clock-names = "ipg", "baud";
 					dmas = <&sdma 45 1 0>,
 					       <&sdma 46 1 0>;
 					dma-names = "rx", "tx";
-- 
1.7.9.5