[PATCH 2/2] ARM: dts: omap5: Add dr_mode for dwc3

[Dmitry Lifshitz]

Hi Felipe, Roger

On 04/16/2014 07:16 PM, Felipe Balbi wrote:
> On Fri, Oct 11, 2013 at 05:46:12PM +0300, Roger Quadros wrote:
>> Hi,
>>
>> On 10/10/2013 01:49 PM, Kishon Vijay Abraham I wrote:
>>> From: George Cherian <george.cherian at ti.com>
>>>
>>> Added dr_mode property in dwc3 and set its default mode to device.
>>
>> If there is a specific reason why this is not set to "otg", we need
>> to explain it here.
>>
>> AFAIK the port is meant to be used as OTG port.
>
> we still don't have the workaround for dual role ports, I've been
> working on it but still need to retest and make sure it's working fine
> before merging upstream.
>


Does the OTG port suppose to work with OMAP5? I mean role switching 
mechanism?

I'm testing kernel v3.16 with OMAP5 based board (CM-T54).

If I set CONFIG_USB_DWC3_DUAL_ROLE, than nothing is going on when I plug 
some device/host cable into micro USB3.0 port (VBUS/ID detection with 
extcon events works fine).

CONFIG_USB_DWC3_HOST/CONFIG_USB_DWC3_GADGET bring port to appropriate 
mode and it works.

What is the purpose of setting dr_mode = "peripheral" in omap5.dtsi, 
since it is overridden by config options in dwc3_probe()?

Thank you in advance for the assistance,

Dmitry