[PATCH v3 0/4] Add usb phy support for STiH41x SoCs.

Peter Griffin peter.griffin at linaro.org
Mon Sep 8 02:30:34 PDT 2014


This series adds support for the on-chip PHY used for USB 1.1 and 2.0 found
on STiH415 and STiH416 consumer electronics SoC's from STMicroelectronics.

Changes since v2:
 - Rebased on top of 3.17-rc3
 - Enable driver in multi_v7_defconfig

Changes since v1:
 - Change to select GENERIC_PHY rather than depends for uniformity
 - Ensure phy_provider_register is called  after PHY is created
 - Add extra commit message for MAINTAINERS patch

Peter Griffin (4):
  phy: phy-stih41x-usb: Add usb phy support for STiH41x SoCs.
  phy: phy-stih41x-usb: Add dt documentation for USB phy on STiH415/6
  MAINTAINERS: Add phy-stih41x-usb.c to ARCH/STI architecture
  ARM: multi_v7_defconfig: Enable stih41x usb phy driver.

 .../devicetree/bindings/phy/phy-stih41x-usb.txt    |  24 +++
 MAINTAINERS                                        |   1 +
 arch/arm/configs/multi_v7_defconfig                |   1 +
 drivers/phy/Kconfig                                |   8 +
 drivers/phy/Makefile                               |   1 +
 drivers/phy/phy-stih41x-usb.c                      | 192 +++++++++++++++++++++
 6 files changed, 227 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-stih41x-usb.txt
 create mode 100644 drivers/phy/phy-stih41x-usb.c

-- 
1.9.1




More information about the linux-arm-kernel mailing list