[PATCH v6 0/4] APM X-Gene PCIe host controller

Bjorn Helgaas bhelgaas at google.com
Sat Sep 6 07:17:43 PDT 2014


On Fri, Sep 5, 2014 at 6:25 PM, Tanmay Inamdar <tinamdar at apm.com> wrote:
> This patch adds support for AppliedMicro X-Gene PCIe host controller. The
> driver is tested on X-Gene platform with different gen1/2/3 PCIe endpoint
> cards.
>
> X-Gene PCIe controller driver has depedency on the pcie arm64 arch support.
> Liviu Dudau from ARM has sent a patch set for pcie arm64 arch support and
> support for creating generic pcie bridge from device tree. Liviu's patches
> are available here
> 1. https://lkml.org/lkml/2014/8/12/361

I'm hoping to merge Liviu's patches and this X-Gene support for v3.18.
I'm currently waiting for Liviu's v10 series (hopefully based on
v3.17-rc2), and since your series depends on that, I'm going to wait
for a v7 of your series that is rebased on top of Liviu's v10.  Does
that make sense?

> If someone wishes to test PCIe on X-Gene with this patch set, above mentioned
> patches from Liviu must be applied before the patches in this patch set. Also
> please use latest xgene u-boot firmware.
>
> changes since V5:
> 1. Port driver to changed interface of 'of_create_pci_host_bridge'
> 2. Fix the prefetch bit setting
> 3. Removed bunch of register programming which is already done by firmware
>
> changes since V4:
> 1. fix section mismatch warnings
> 2. fix the patch description
> 3. fix indentation
> 4. update read/write cfg functions by passing both addr and offset.
> 5. use 'time_before' for timeout.
> 6. remove unnecessary 'IS_ERR_OR_NULL'. Keep 'IS_ERR' for 'clk_get'
> 7. remove BUG_ON for pci_ioremap_io.
>
> changes since V3:
> 1. remove 'struct hw_pci' and supporting ops in hw_pci
> 2. add code to create the host bridge from dts
> 3. add code to scan the the host bridge
> 4. modify outbound windows setup function to get resource information from
>    'bridge->windows'
> 5. add compatible string in pcie dts node with current X-Gene SOC name.
>
> changes since V2:
> 1. redefined each PCI port in different PCI domain correctly.
> 2. removed setup_lane and setup_link functions from driver.
> 3. removed scan_bus wrapper and set_primary_bus hack.
> 4. added pci_ioremap_io for io resources.
>
> changes since V1:
> 1. added PCI domain support
> 2. reading cpu and pci addresses from device tree to configure regions.
> 3. got rid of unnecessary wrappers for readl and writel.
> 4. got rid of endpoint configuration code.
> 5. added 'dma-ranges' property support to read inbound region configuration.
> 6. renamed host driver file to 'pci-xgene.c' from 'pcie-xgene.c'
> 7. dropped 'clock-names' property from bindings
> 8. added comments whereever requested.
>
> Tanmay Inamdar (4):
>   pci:host: APM X-Gene PCIe controller driver
>   arm64: dts: APM X-Gene PCIe device tree nodes
>   dt-bindings: pci: xgene pcie device tree bindings
>   MAINTAINERS: entry for APM X-Gene PCIe host driver
>
>  .../devicetree/bindings/pci/xgene-pci.txt          |  55 ++
>  MAINTAINERS                                        |   8 +
>  arch/arm64/boot/dts/apm-mustang.dts                |   8 +
>  arch/arm64/boot/dts/apm-storm.dtsi                 | 160 ++++++
>  drivers/pci/host/Kconfig                           |  10 +
>  drivers/pci/host/Makefile                          |   1 +
>  drivers/pci/host/pci-xgene.c                       | 638 +++++++++++++++++++++
>  7 files changed, 880 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/xgene-pci.txt
>  create mode 100644 drivers/pci/host/pci-xgene.c
>
> --
> 1.9.1
>



More information about the linux-arm-kernel mailing list