[PATCH] ARM: zynq: Add ISL9305 regulator on Parallella board

Mark Brown broonie at kernel.org
Sat Sep 6 04:40:16 PDT 2014


There is an ISL9305 regulator on the Parallella board, add it to the DT
along with descriptions of all the supplies.

Signed-off-by: Mark Brown <broonie at kernel.org>
---
 arch/arm/boot/dts/zynq-parallella.dts | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts
index 41afd9da6876..43ca89fb92e4 100644
--- a/arch/arm/boot/dts/zynq-parallella.dts
+++ b/arch/arm/boot/dts/zynq-parallella.dts
@@ -53,6 +53,29 @@
 
 &i2c0 {
 	status = "okay";
+
+	isl9305: isl9305 at 68 {
+		compatible = "isl,isl9305";
+		reg = <0x68>;
+
+		regulators {
+			dcd1 {
+				regulator-name = "VDD_DSP";
+				regulator-always-on;
+			};
+			dcd2 {
+				regulator-name = "1P35V";
+				regulator-always-on;
+			};
+			ldo1 {
+				regulator-name = "VDD_ADJ";
+			};
+			ldo2 {
+				regulator-name = "VDD_GPIO";
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &sdhci1 {
-- 
2.1.0




More information about the linux-arm-kernel mailing list