[PATCH 08/11] ARM: dts: rockchip: add operating points and armclk references
Heiko Stuebner
heiko at sntech.de
Fri Sep 5 16:06:11 PDT 2014
Add basic OPP entries for current supported Rockchip SoCs.
The operating points are currently very conservative, so individual
boards may opt to redefine them.
Signed-off-by: Heiko Stuebner <heiko at sntech.de>
---
arch/arm/boot/dts/rk3066a.dtsi | 12 +++++++++++-
arch/arm/boot/dts/rk3188.dtsi | 15 ++++++++++++++-
arch/arm/boot/dts/rk3288.dtsi | 17 ++++++++++++++++-
3 files changed, 41 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 879a818..572c30b 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -26,11 +26,21 @@
#size-cells = <0>;
enable-method = "rockchip,rk3066-smp";
- cpu at 0 {
+ cpu0: cpu at 0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
reg = <0x0>;
+ operating-points = <
+ /* kHz uV */
+ 1008000 1075000
+ 816000 1025000
+ 600000 1025000
+ 504000 1000000
+ 312000 975000
+ >;
+ clock-latency = <40000>;
+ clocks = <&cru ARMCLK>;
};
cpu at 1 {
device_type = "cpu";
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index ee801a9..e237216 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -26,11 +26,24 @@
#size-cells = <0>;
enable-method = "rockchip,rk3066-smp";
- cpu at 0 {
+ cpu0: cpu at 0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
reg = <0x0>;
+ operating-points = <
+ /* kHz uV */
+ 1608000 1350000
+ 1416000 1250000
+ 1200000 1150000
+ 1008000 1075000
+ 816000 975000
+ 600000 950000
+ 504000 925000
+ 312000 875000
+ >;
+ clock-latency = <40000>;
+ clocks = <&cru ARMCLK>;
};
cpu at 1 {
device_type = "cpu";
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 5950b0a..9275a47 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -40,10 +40,25 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu at 500 {
+ cpu0: cpu at 500 {
device_type = "cpu";
compatible = "arm,cortex-a12";
reg = <0x500>;
+ operating-points = <
+ /* KHz uV */
+ 1416000 1150000
+ 1200000 1050000
+ 1008000 1000000
+ 816000 950000
+ 696000 900000
+ 600000 850000
+ 408000 850000
+ 312000 850000
+ 216000 850000
+ 126000 850000
+ >;
+ clock-latency = <40000>;
+ clocks = <&cru ARMCLK>;
};
cpu at 501 {
device_type = "cpu";
--
2.0.1
More information about the linux-arm-kernel
mailing list