[PATCH v9 06/12] ARM: integrator: Correct usage of of_pci_range_to_resource()

[Bjorn Helgaas]

[+cc Linus]

On Tue, Aug 12, 2014 at 05:25:19PM +0100, Liviu Dudau wrote:
> Previously, of_pci_range_to_resource() would return a resource
> that contained physical addresses of the IO space even if the
> IORESOURCE_IO flags mandate a logical port set of values. Now
> that the function has been fixed we need to update the drivers
> that were taking advantage of the old behaviour.
> 
> Cc: Linus Walleij <linus.walleij at linaro.org>
> Cc: Arnd Bergmann <arnd at arndb.de>
> Cc: Rob Herring <robh+dt at kernel.org>
> Cc: Russell King <linux at arm.linux.org.uk>
> Signed-off-by: Liviu Dudau <Liviu.Dudau at arm.com>

Something's wrong with the CC: list.  You list Linus here in the changelog,
but I don't see him in the CC: headers.

> ---
>  arch/arm/mach-integrator/pci_v3.c | 24 +++++++++++++-----------
>  1 file changed, 13 insertions(+), 11 deletions(-)
> 
> diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
> index 05e1f73..193b7f8 100644
> --- a/arch/arm/mach-integrator/pci_v3.c
> +++ b/arch/arm/mach-integrator/pci_v3.c
> @@ -660,6 +660,7 @@ static void __init pci_v3_preinit(void)
>  {
>  	unsigned long flags;
>  	unsigned int temp;
> +	phys_addr_t io_address = pci_pio_to_address(io_mem.start);
>  
>  	pcibios_min_mem = 0x00100000;
>  
> @@ -701,7 +702,7 @@ static void __init pci_v3_preinit(void)
>  	/*
>  	 * Setup window 2 - PCI IO
>  	 */
> -	v3_writel(V3_LB_BASE2, v3_addr_to_lb_base2(io_mem.start) |
> +	v3_writel(V3_LB_BASE2, v3_addr_to_lb_base2(io_address) |
>  			V3_LB_BASE_ENABLE);
>  	v3_writew(V3_LB_MAP2, v3_addr_to_lb_map2(0));
>  
> @@ -742,6 +743,7 @@ static void __init pci_v3_preinit(void)
>  static void __init pci_v3_postinit(void)
>  {
>  	unsigned int pci_cmd;
> +	phys_addr_t io_address = pci_pio_to_address(io_mem.start);
>  
>  	pci_cmd = PCI_COMMAND_MEMORY |
>  		  PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE;
> @@ -758,7 +760,7 @@ static void __init pci_v3_postinit(void)
>  		       "interrupt: %d\n", ret);
>  #endif
>  
> -	register_isa_ports(non_mem.start, io_mem.start, 0);
> +	register_isa_ports(non_mem.start, io_address, 0);
>  }
>  
>  /*
> @@ -867,33 +869,33 @@ static int __init pci_v3_probe(struct platform_device *pdev)
>  
>  	for_each_of_pci_range(&parser, &range) {
>  		if (!range.flags) {
> -			of_pci_range_to_resource(&range, np, &conf_mem);
> +			ret = of_pci_range_to_resource(&range, np, &conf_mem);
>  			conf_mem.name = "PCIv3 config";
>  		}
>  		if (range.flags & IORESOURCE_IO) {
> -			of_pci_range_to_resource(&range, np, &io_mem);
> +			ret = of_pci_range_to_resource(&range, np, &io_mem);
> +			dev_info(&pdev->dev, "IO PCI range converted\n");
>  			io_mem.name = "PCIv3 I/O";
>  		}
>  		if ((range.flags & IORESOURCE_MEM) &&
>  			!(range.flags & IORESOURCE_PREFETCH)) {
>  			non_mem_pci = range.pci_addr;
>  			non_mem_pci_sz = range.size;
> -			of_pci_range_to_resource(&range, np, &non_mem);
> +			ret = of_pci_range_to_resource(&range, np, &non_mem);
>  			non_mem.name = "PCIv3 non-prefetched mem";
>  		}
>  		if ((range.flags & IORESOURCE_MEM) &&
>  			(range.flags & IORESOURCE_PREFETCH)) {
>  			pre_mem_pci = range.pci_addr;
>  			pre_mem_pci_sz = range.size;
> -			of_pci_range_to_resource(&range, np, &pre_mem);
> +			ret = of_pci_range_to_resource(&range, np, &pre_mem);
>  			pre_mem.name = "PCIv3 prefetched mem";
>  		}
> -	}
>  
> -	if (!conf_mem.start || !io_mem.start ||
> -	    !non_mem.start || !pre_mem.start) {
> -		dev_err(&pdev->dev, "missing ranges in device node\n");
> -		return -EINVAL;
> +		if (ret < 0) {
> +			dev_err(&pdev->dev, "missing ranges in device node\n");
> +			return -EINVAL;
> +		}
>  	}
>  
>  	pci_v3.map_irq = of_irq_parse_and_map_pci;
> -- 
> 2.0.4
>