[PATCH v2 5/6] ARM: dts: imx28-tx28: Fix display duplicate name warning

[Lothar Waßmann]

Hi,

Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam at freescale.com>
> 
> The lcdif node has a property named "display" and also a child node
> called "display", which causes the following warning:
> 
> device-tree: Duplicate name in lcdif at 80030000, renamed to "display#1"
> 
> Rename the child node name in order to avoid the warning.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---
> Changes since v1:
> - Also update 'aliases'
> 
>  arch/arm/boot/dts/imx28-tx28.dts | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
> index e14bd86..f947fbb 100644
> --- a/arch/arm/boot/dts/imx28-tx28.dts
> +++ b/arch/arm/boot/dts/imx28-tx28.dts
> @@ -21,7 +21,7 @@
>  	aliases {
>  		can0 = &can0;
>  		can1 = &can1;
> -		display = &display;
> +		display = &display0;
>  		ds1339 = &ds1339;
>  		gpio5 = &gpio5;
>  		lcdif = &lcdif;
> @@ -309,10 +309,10 @@
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_sync_pins_a &tx28_lcdif_ctrl_pins>;
>  	lcd-supply = <&reg_lcd>;
> -	display = <&display>;
> +	display = <&display0>;
>  	status = "okay";
>  
> -	display: display at 0 {
> +	display0: display0 {
>  		bits-per-pixel = <32>;
>  		bus-width = <24>;
>  		display-timings {

Acked-by: Lothar Waßmann <LW at KARO-electronics.de>

-- 
___________________________________________________________

Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Geschäftsführer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996

www.karo-electronics.de | info at karo-electronics.de
___________________________________________________________