[PATCH 5/6] dts, arm64: Move dts files to vendor subdirs
Robert Richter
rric at kernel.org
Thu Sep 4 23:48:11 PDT 2014
From: Robert Richter <rrichter at cavium.com>
Moving dts files to vendor subdirs.
Signed-off-by: Robert Richter <rrichter at cavium.com>
---
arch/arm64/boot/dts/Makefile | 4 +-
arch/arm64/boot/dts/apm-mustang.dts | 34 --
arch/arm64/boot/dts/apm-storm.dtsi | 425 -----------------------
arch/arm64/boot/dts/apm/Makefile | 5 +
arch/arm64/boot/dts/apm/apm-mustang.dts | 34 ++
arch/arm64/boot/dts/apm/apm-storm.dtsi | 425 +++++++++++++++++++++++
arch/arm64/boot/dts/arm/Makefile | 6 +
arch/arm64/boot/dts/arm/foundation-v8.dts | 232 +++++++++++++
arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts | 159 +++++++++
arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi | 240 +++++++++++++
arch/arm64/boot/dts/foundation-v8.dts | 232 -------------
arch/arm64/boot/dts/rtsm_ve-aemv8a.dts | 159 ---------
arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi | 240 -------------
13 files changed, 1103 insertions(+), 1092 deletions(-)
delete mode 100644 arch/arm64/boot/dts/apm-mustang.dts
delete mode 100644 arch/arm64/boot/dts/apm-storm.dtsi
create mode 100644 arch/arm64/boot/dts/apm/Makefile
create mode 100644 arch/arm64/boot/dts/apm/apm-mustang.dts
create mode 100644 arch/arm64/boot/dts/apm/apm-storm.dtsi
create mode 100644 arch/arm64/boot/dts/arm/Makefile
create mode 100644 arch/arm64/boot/dts/arm/foundation-v8.dts
create mode 100644 arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
create mode 100644 arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
delete mode 100644 arch/arm64/boot/dts/foundation-v8.dts
delete mode 100644 arch/arm64/boot/dts/rtsm_ve-aemv8a.dts
delete mode 100644 arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index 9b8622532068..309c3dc4bb70 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -1,5 +1,5 @@
-dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb foundation-v8.dtb
-dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb
+dts-dirs += apm
+dts-dirs += arm
always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/apm-mustang.dts b/arch/arm64/boot/dts/apm-mustang.dts
deleted file mode 100644
index b2f56229aa5e..000000000000
--- a/arch/arm64/boot/dts/apm-mustang.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * dts file for AppliedMicro (APM) Mustang Board
- *
- * Copyright (C) 2013, Applied Micro Circuits Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- */
-
-/dts-v1/;
-
-/include/ "apm-storm.dtsi"
-
-/ {
- model = "APM X-Gene Mustang board";
- compatible = "apm,mustang", "apm,xgene-storm";
-
- chosen { };
-
- memory {
- device_type = "memory";
- reg = < 0x1 0x00000000 0x0 0x80000000 >; /* Updated by bootloader */
- };
-};
-
-&serial0 {
- status = "ok";
-};
-
-&menet {
- status = "ok";
-};
diff --git a/arch/arm64/boot/dts/apm-storm.dtsi b/arch/arm64/boot/dts/apm-storm.dtsi
deleted file mode 100644
index c0aceef7f5b3..000000000000
--- a/arch/arm64/boot/dts/apm-storm.dtsi
+++ /dev/null
@@ -1,425 +0,0 @@
-/*
- * dts file for AppliedMicro (APM) X-Gene Storm SOC
- *
- * Copyright (C) 2013, Applied Micro Circuits Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- */
-
-/ {
- compatible = "apm,xgene-storm";
- interrupt-parent = <&gic>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- cpu at 000 {
- device_type = "cpu";
- compatible = "apm,potenza", "arm,armv8";
- reg = <0x0 0x000>;
- enable-method = "spin-table";
- cpu-release-addr = <0x1 0x0000fff8>;
- };
- cpu at 001 {
- device_type = "cpu";
- compatible = "apm,potenza", "arm,armv8";
- reg = <0x0 0x001>;
- enable-method = "spin-table";
- cpu-release-addr = <0x1 0x0000fff8>;
- };
- cpu at 100 {
- device_type = "cpu";
- compatible = "apm,potenza", "arm,armv8";
- reg = <0x0 0x100>;
- enable-method = "spin-table";
- cpu-release-addr = <0x1 0x0000fff8>;
- };
- cpu at 101 {
- device_type = "cpu";
- compatible = "apm,potenza", "arm,armv8";
- reg = <0x0 0x101>;
- enable-method = "spin-table";
- cpu-release-addr = <0x1 0x0000fff8>;
- };
- cpu at 200 {
- device_type = "cpu";
- compatible = "apm,potenza", "arm,armv8";
- reg = <0x0 0x200>;
- enable-method = "spin-table";
- cpu-release-addr = <0x1 0x0000fff8>;
- };
- cpu at 201 {
- device_type = "cpu";
- compatible = "apm,potenza", "arm,armv8";
- reg = <0x0 0x201>;
- enable-method = "spin-table";
- cpu-release-addr = <0x1 0x0000fff8>;
- };
- cpu at 300 {
- device_type = "cpu";
- compatible = "apm,potenza", "arm,armv8";
- reg = <0x0 0x300>;
- enable-method = "spin-table";
- cpu-release-addr = <0x1 0x0000fff8>;
- };
- cpu at 301 {
- device_type = "cpu";
- compatible = "apm,potenza", "arm,armv8";
- reg = <0x0 0x301>;
- enable-method = "spin-table";
- cpu-release-addr = <0x1 0x0000fff8>;
- };
- };
-
- gic: interrupt-controller at 78010000 {
- compatible = "arm,cortex-a15-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x0 0x78010000 0x0 0x1000>, /* GIC Dist */
- <0x0 0x78020000 0x0 0x1000>, /* GIC CPU */
- <0x0 0x78040000 0x0 0x2000>, /* GIC VCPU Control */
- <0x0 0x78060000 0x0 0x2000>; /* GIC VCPU */
- interrupts = <1 9 0xf04>; /* GIC Maintenence IRQ */
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <1 0 0xff01>, /* Secure Phys IRQ */
- <1 13 0xff01>, /* Non-secure Phys IRQ */
- <1 14 0xff01>, /* Virt IRQ */
- <1 15 0xff01>; /* Hyp IRQ */
- clock-frequency = <50000000>;
- };
-
- soc {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- clocks {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- refclk: refclk {
- compatible = "fixed-clock";
- #clock-cells = <1>;
- clock-frequency = <100000000>;
- clock-output-names = "refclk";
- };
-
- pcppll: pcppll at 17000100 {
- compatible = "apm,xgene-pcppll-clock";
- #clock-cells = <1>;
- clocks = <&refclk 0>;
- clock-names = "pcppll";
- reg = <0x0 0x17000100 0x0 0x1000>;
- clock-output-names = "pcppll";
- type = <0>;
- };
-
- socpll: socpll at 17000120 {
- compatible = "apm,xgene-socpll-clock";
- #clock-cells = <1>;
- clocks = <&refclk 0>;
- clock-names = "socpll";
- reg = <0x0 0x17000120 0x0 0x1000>;
- clock-output-names = "socpll";
- type = <1>;
- };
-
- socplldiv2: socplldiv2 {
- compatible = "fixed-factor-clock";
- #clock-cells = <1>;
- clocks = <&socpll 0>;
- clock-names = "socplldiv2";
- clock-mult = <1>;
- clock-div = <2>;
- clock-output-names = "socplldiv2";
- };
-
- qmlclk: qmlclk {
- compatible = "apm,xgene-device-clock";
- #clock-cells = <1>;
- clocks = <&socplldiv2 0>;
- clock-names = "qmlclk";
- reg = <0x0 0x1703C000 0x0 0x1000>;
- reg-names = "csr-reg";
- clock-output-names = "qmlclk";
- };
-
- ethclk: ethclk {
- compatible = "apm,xgene-device-clock";
- #clock-cells = <1>;
- clocks = <&socplldiv2 0>;
- clock-names = "ethclk";
- reg = <0x0 0x17000000 0x0 0x1000>;
- reg-names = "div-reg";
- divider-offset = <0x238>;
- divider-width = <0x9>;
- divider-shift = <0x0>;
- clock-output-names = "ethclk";
- };
-
- menetclk: menetclk {
- compatible = "apm,xgene-device-clock";
- #clock-cells = <1>;
- clocks = <ðclk 0>;
- reg = <0x0 0x1702C000 0x0 0x1000>;
- reg-names = "csr-reg";
- clock-output-names = "menetclk";
- };
-
- sataphy1clk: sataphy1clk at 1f21c000 {
- compatible = "apm,xgene-device-clock";
- #clock-cells = <1>;
- clocks = <&socplldiv2 0>;
- reg = <0x0 0x1f21c000 0x0 0x1000>;
- reg-names = "csr-reg";
- clock-output-names = "sataphy1clk";
- status = "disabled";
- csr-offset = <0x4>;
- csr-mask = <0x00>;
- enable-offset = <0x0>;
- enable-mask = <0x06>;
- };
-
- sataphy2clk: sataphy1clk at 1f22c000 {
- compatible = "apm,xgene-device-clock";
- #clock-cells = <1>;
- clocks = <&socplldiv2 0>;
- reg = <0x0 0x1f22c000 0x0 0x1000>;
- reg-names = "csr-reg";
- clock-output-names = "sataphy2clk";
- status = "ok";
- csr-offset = <0x4>;
- csr-mask = <0x3a>;
- enable-offset = <0x0>;
- enable-mask = <0x06>;
- };
-
- sataphy3clk: sataphy1clk at 1f23c000 {
- compatible = "apm,xgene-device-clock";
- #clock-cells = <1>;
- clocks = <&socplldiv2 0>;
- reg = <0x0 0x1f23c000 0x0 0x1000>;
- reg-names = "csr-reg";
- clock-output-names = "sataphy3clk";
- status = "ok";
- csr-offset = <0x4>;
- csr-mask = <0x3a>;
- enable-offset = <0x0>;
- enable-mask = <0x06>;
- };
-
- sata01clk: sata01clk at 1f21c000 {
- compatible = "apm,xgene-device-clock";
- #clock-cells = <1>;
- clocks = <&socplldiv2 0>;
- reg = <0x0 0x1f21c000 0x0 0x1000>;
- reg-names = "csr-reg";
- clock-output-names = "sata01clk";
- csr-offset = <0x4>;
- csr-mask = <0x05>;
- enable-offset = <0x0>;
- enable-mask = <0x39>;
- };
-
- sata23clk: sata23clk at 1f22c000 {
- compatible = "apm,xgene-device-clock";
- #clock-cells = <1>;
- clocks = <&socplldiv2 0>;
- reg = <0x0 0x1f22c000 0x0 0x1000>;
- reg-names = "csr-reg";
- clock-output-names = "sata23clk";
- csr-offset = <0x4>;
- csr-mask = <0x05>;
- enable-offset = <0x0>;
- enable-mask = <0x39>;
- };
-
- sata45clk: sata45clk at 1f23c000 {
- compatible = "apm,xgene-device-clock";
- #clock-cells = <1>;
- clocks = <&socplldiv2 0>;
- reg = <0x0 0x1f23c000 0x0 0x1000>;
- reg-names = "csr-reg";
- clock-output-names = "sata45clk";
- csr-offset = <0x4>;
- csr-mask = <0x05>;
- enable-offset = <0x0>;
- enable-mask = <0x39>;
- };
-
- rtcclk: rtcclk at 17000000 {
- compatible = "apm,xgene-device-clock";
- #clock-cells = <1>;
- clocks = <&socplldiv2 0>;
- reg = <0x0 0x17000000 0x0 0x2000>;
- reg-names = "csr-reg";
- csr-offset = <0xc>;
- csr-mask = <0x2>;
- enable-offset = <0x10>;
- enable-mask = <0x2>;
- clock-output-names = "rtcclk";
- };
- };
-
- serial0: serial at 1c020000 {
- status = "disabled";
- device_type = "serial";
- compatible = "ns16550a";
- reg = <0 0x1c020000 0x0 0x1000>;
- reg-shift = <2>;
- clock-frequency = <10000000>; /* Updated by bootloader */
- interrupt-parent = <&gic>;
- interrupts = <0x0 0x4c 0x4>;
- };
-
- serial1: serial at 1c021000 {
- status = "disabled";
- device_type = "serial";
- compatible = "ns16550a";
- reg = <0 0x1c021000 0x0 0x1000>;
- reg-shift = <2>;
- clock-frequency = <10000000>; /* Updated by bootloader */
- interrupt-parent = <&gic>;
- interrupts = <0x0 0x4d 0x4>;
- };
-
- serial2: serial at 1c022000 {
- status = "disabled";
- device_type = "serial";
- compatible = "ns16550a";
- reg = <0 0x1c022000 0x0 0x1000>;
- reg-shift = <2>;
- clock-frequency = <10000000>; /* Updated by bootloader */
- interrupt-parent = <&gic>;
- interrupts = <0x0 0x4e 0x4>;
- };
-
- serial3: serial at 1c023000 {
- status = "disabled";
- device_type = "serial";
- compatible = "ns16550a";
- reg = <0 0x1c023000 0x0 0x1000>;
- reg-shift = <2>;
- clock-frequency = <10000000>; /* Updated by bootloader */
- interrupt-parent = <&gic>;
- interrupts = <0x0 0x4f 0x4>;
- };
-
- phy1: phy at 1f21a000 {
- compatible = "apm,xgene-phy";
- reg = <0x0 0x1f21a000 0x0 0x100>;
- #phy-cells = <1>;
- clocks = <&sataphy1clk 0>;
- status = "disabled";
- apm,tx-boost-gain = <30 30 30 30 30 30>;
- apm,tx-eye-tuning = <2 10 10 2 10 10>;
- };
-
- phy2: phy at 1f22a000 {
- compatible = "apm,xgene-phy";
- reg = <0x0 0x1f22a000 0x0 0x100>;
- #phy-cells = <1>;
- clocks = <&sataphy2clk 0>;
- status = "ok";
- apm,tx-boost-gain = <30 30 30 30 30 30>;
- apm,tx-eye-tuning = <1 10 10 2 10 10>;
- };
-
- phy3: phy at 1f23a000 {
- compatible = "apm,xgene-phy";
- reg = <0x0 0x1f23a000 0x0 0x100>;
- #phy-cells = <1>;
- clocks = <&sataphy3clk 0>;
- status = "ok";
- apm,tx-boost-gain = <31 31 31 31 31 31>;
- apm,tx-eye-tuning = <2 10 10 2 10 10>;
- };
-
- sata1: sata at 1a000000 {
- compatible = "apm,xgene-ahci";
- reg = <0x0 0x1a000000 0x0 0x1000>,
- <0x0 0x1f210000 0x0 0x1000>,
- <0x0 0x1f21d000 0x0 0x1000>,
- <0x0 0x1f21e000 0x0 0x1000>,
- <0x0 0x1f217000 0x0 0x1000>;
- interrupts = <0x0 0x86 0x4>;
- dma-coherent;
- status = "disabled";
- clocks = <&sata01clk 0>;
- phys = <&phy1 0>;
- phy-names = "sata-phy";
- };
-
- sata2: sata at 1a400000 {
- compatible = "apm,xgene-ahci";
- reg = <0x0 0x1a400000 0x0 0x1000>,
- <0x0 0x1f220000 0x0 0x1000>,
- <0x0 0x1f22d000 0x0 0x1000>,
- <0x0 0x1f22e000 0x0 0x1000>,
- <0x0 0x1f227000 0x0 0x1000>;
- interrupts = <0x0 0x87 0x4>;
- dma-coherent;
- status = "ok";
- clocks = <&sata23clk 0>;
- phys = <&phy2 0>;
- phy-names = "sata-phy";
- };
-
- sata3: sata at 1a800000 {
- compatible = "apm,xgene-ahci";
- reg = <0x0 0x1a800000 0x0 0x1000>,
- <0x0 0x1f230000 0x0 0x1000>,
- <0x0 0x1f23d000 0x0 0x1000>,
- <0x0 0x1f23e000 0x0 0x1000>;
- interrupts = <0x0 0x88 0x4>;
- dma-coherent;
- status = "ok";
- clocks = <&sata45clk 0>;
- phys = <&phy3 0>;
- phy-names = "sata-phy";
- };
-
- rtc: rtc at 10510000 {
- compatible = "apm,xgene-rtc";
- reg = <0x0 0x10510000 0x0 0x400>;
- interrupts = <0x0 0x46 0x4>;
- #clock-cells = <1>;
- clocks = <&rtcclk 0>;
- };
-
- menet: ethernet at 17020000 {
- compatible = "apm,xgene-enet";
- status = "disabled";
- reg = <0x0 0x17020000 0x0 0xd100>,
- <0x0 0X17030000 0x0 0X400>,
- <0x0 0X10000000 0x0 0X200>;
- reg-names = "enet_csr", "ring_csr", "ring_cmd";
- interrupts = <0x0 0x3c 0x4>;
- dma-coherent;
- clocks = <&menetclk 0>;
- local-mac-address = [00 01 73 00 00 01];
- phy-connection-type = "rgmii";
- phy-handle = <&menetphy>;
- mdio {
- compatible = "apm,xgene-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- menetphy: menetphy at 3 {
- compatible = "ethernet-phy-id001c.c915";
- reg = <0x3>;
- };
-
- };
- };
- };
-};
diff --git a/arch/arm64/boot/dts/apm/Makefile b/arch/arm64/boot/dts/apm/Makefile
new file mode 100644
index 000000000000..a2afabbc1717
--- /dev/null
+++ b/arch/arm64/boot/dts/apm/Makefile
@@ -0,0 +1,5 @@
+dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
diff --git a/arch/arm64/boot/dts/apm/apm-mustang.dts b/arch/arm64/boot/dts/apm/apm-mustang.dts
new file mode 100644
index 000000000000..b2f56229aa5e
--- /dev/null
+++ b/arch/arm64/boot/dts/apm/apm-mustang.dts
@@ -0,0 +1,34 @@
+/*
+ * dts file for AppliedMicro (APM) Mustang Board
+ *
+ * Copyright (C) 2013, Applied Micro Circuits Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+/include/ "apm-storm.dtsi"
+
+/ {
+ model = "APM X-Gene Mustang board";
+ compatible = "apm,mustang", "apm,xgene-storm";
+
+ chosen { };
+
+ memory {
+ device_type = "memory";
+ reg = < 0x1 0x00000000 0x0 0x80000000 >; /* Updated by bootloader */
+ };
+};
+
+&serial0 {
+ status = "ok";
+};
+
+&menet {
+ status = "ok";
+};
diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi
new file mode 100644
index 000000000000..c0aceef7f5b3
--- /dev/null
+++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi
@@ -0,0 +1,425 @@
+/*
+ * dts file for AppliedMicro (APM) X-Gene Storm SOC
+ *
+ * Copyright (C) 2013, Applied Micro Circuits Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/ {
+ compatible = "apm,xgene-storm";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu at 000 {
+ device_type = "cpu";
+ compatible = "apm,potenza", "arm,armv8";
+ reg = <0x0 0x000>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu at 001 {
+ device_type = "cpu";
+ compatible = "apm,potenza", "arm,armv8";
+ reg = <0x0 0x001>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu at 100 {
+ device_type = "cpu";
+ compatible = "apm,potenza", "arm,armv8";
+ reg = <0x0 0x100>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu at 101 {
+ device_type = "cpu";
+ compatible = "apm,potenza", "arm,armv8";
+ reg = <0x0 0x101>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu at 200 {
+ device_type = "cpu";
+ compatible = "apm,potenza", "arm,armv8";
+ reg = <0x0 0x200>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu at 201 {
+ device_type = "cpu";
+ compatible = "apm,potenza", "arm,armv8";
+ reg = <0x0 0x201>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu at 300 {
+ device_type = "cpu";
+ compatible = "apm,potenza", "arm,armv8";
+ reg = <0x0 0x300>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu at 301 {
+ device_type = "cpu";
+ compatible = "apm,potenza", "arm,armv8";
+ reg = <0x0 0x301>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ };
+
+ gic: interrupt-controller at 78010000 {
+ compatible = "arm,cortex-a15-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x0 0x78010000 0x0 0x1000>, /* GIC Dist */
+ <0x0 0x78020000 0x0 0x1000>, /* GIC CPU */
+ <0x0 0x78040000 0x0 0x2000>, /* GIC VCPU Control */
+ <0x0 0x78060000 0x0 0x2000>; /* GIC VCPU */
+ interrupts = <1 9 0xf04>; /* GIC Maintenence IRQ */
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 0 0xff01>, /* Secure Phys IRQ */
+ <1 13 0xff01>, /* Non-secure Phys IRQ */
+ <1 14 0xff01>, /* Virt IRQ */
+ <1 15 0xff01>; /* Hyp IRQ */
+ clock-frequency = <50000000>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ refclk: refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <1>;
+ clock-frequency = <100000000>;
+ clock-output-names = "refclk";
+ };
+
+ pcppll: pcppll at 17000100 {
+ compatible = "apm,xgene-pcppll-clock";
+ #clock-cells = <1>;
+ clocks = <&refclk 0>;
+ clock-names = "pcppll";
+ reg = <0x0 0x17000100 0x0 0x1000>;
+ clock-output-names = "pcppll";
+ type = <0>;
+ };
+
+ socpll: socpll at 17000120 {
+ compatible = "apm,xgene-socpll-clock";
+ #clock-cells = <1>;
+ clocks = <&refclk 0>;
+ clock-names = "socpll";
+ reg = <0x0 0x17000120 0x0 0x1000>;
+ clock-output-names = "socpll";
+ type = <1>;
+ };
+
+ socplldiv2: socplldiv2 {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <1>;
+ clocks = <&socpll 0>;
+ clock-names = "socplldiv2";
+ clock-mult = <1>;
+ clock-div = <2>;
+ clock-output-names = "socplldiv2";
+ };
+
+ qmlclk: qmlclk {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ clock-names = "qmlclk";
+ reg = <0x0 0x1703C000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "qmlclk";
+ };
+
+ ethclk: ethclk {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ clock-names = "ethclk";
+ reg = <0x0 0x17000000 0x0 0x1000>;
+ reg-names = "div-reg";
+ divider-offset = <0x238>;
+ divider-width = <0x9>;
+ divider-shift = <0x0>;
+ clock-output-names = "ethclk";
+ };
+
+ menetclk: menetclk {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <ðclk 0>;
+ reg = <0x0 0x1702C000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "menetclk";
+ };
+
+ sataphy1clk: sataphy1clk at 1f21c000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f21c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "sataphy1clk";
+ status = "disabled";
+ csr-offset = <0x4>;
+ csr-mask = <0x00>;
+ enable-offset = <0x0>;
+ enable-mask = <0x06>;
+ };
+
+ sataphy2clk: sataphy1clk at 1f22c000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f22c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "sataphy2clk";
+ status = "ok";
+ csr-offset = <0x4>;
+ csr-mask = <0x3a>;
+ enable-offset = <0x0>;
+ enable-mask = <0x06>;
+ };
+
+ sataphy3clk: sataphy1clk at 1f23c000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f23c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "sataphy3clk";
+ status = "ok";
+ csr-offset = <0x4>;
+ csr-mask = <0x3a>;
+ enable-offset = <0x0>;
+ enable-mask = <0x06>;
+ };
+
+ sata01clk: sata01clk at 1f21c000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f21c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "sata01clk";
+ csr-offset = <0x4>;
+ csr-mask = <0x05>;
+ enable-offset = <0x0>;
+ enable-mask = <0x39>;
+ };
+
+ sata23clk: sata23clk at 1f22c000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f22c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "sata23clk";
+ csr-offset = <0x4>;
+ csr-mask = <0x05>;
+ enable-offset = <0x0>;
+ enable-mask = <0x39>;
+ };
+
+ sata45clk: sata45clk at 1f23c000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f23c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "sata45clk";
+ csr-offset = <0x4>;
+ csr-mask = <0x05>;
+ enable-offset = <0x0>;
+ enable-mask = <0x39>;
+ };
+
+ rtcclk: rtcclk at 17000000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x17000000 0x0 0x2000>;
+ reg-names = "csr-reg";
+ csr-offset = <0xc>;
+ csr-mask = <0x2>;
+ enable-offset = <0x10>;
+ enable-mask = <0x2>;
+ clock-output-names = "rtcclk";
+ };
+ };
+
+ serial0: serial at 1c020000 {
+ status = "disabled";
+ device_type = "serial";
+ compatible = "ns16550a";
+ reg = <0 0x1c020000 0x0 0x1000>;
+ reg-shift = <2>;
+ clock-frequency = <10000000>; /* Updated by bootloader */
+ interrupt-parent = <&gic>;
+ interrupts = <0x0 0x4c 0x4>;
+ };
+
+ serial1: serial at 1c021000 {
+ status = "disabled";
+ device_type = "serial";
+ compatible = "ns16550a";
+ reg = <0 0x1c021000 0x0 0x1000>;
+ reg-shift = <2>;
+ clock-frequency = <10000000>; /* Updated by bootloader */
+ interrupt-parent = <&gic>;
+ interrupts = <0x0 0x4d 0x4>;
+ };
+
+ serial2: serial at 1c022000 {
+ status = "disabled";
+ device_type = "serial";
+ compatible = "ns16550a";
+ reg = <0 0x1c022000 0x0 0x1000>;
+ reg-shift = <2>;
+ clock-frequency = <10000000>; /* Updated by bootloader */
+ interrupt-parent = <&gic>;
+ interrupts = <0x0 0x4e 0x4>;
+ };
+
+ serial3: serial at 1c023000 {
+ status = "disabled";
+ device_type = "serial";
+ compatible = "ns16550a";
+ reg = <0 0x1c023000 0x0 0x1000>;
+ reg-shift = <2>;
+ clock-frequency = <10000000>; /* Updated by bootloader */
+ interrupt-parent = <&gic>;
+ interrupts = <0x0 0x4f 0x4>;
+ };
+
+ phy1: phy at 1f21a000 {
+ compatible = "apm,xgene-phy";
+ reg = <0x0 0x1f21a000 0x0 0x100>;
+ #phy-cells = <1>;
+ clocks = <&sataphy1clk 0>;
+ status = "disabled";
+ apm,tx-boost-gain = <30 30 30 30 30 30>;
+ apm,tx-eye-tuning = <2 10 10 2 10 10>;
+ };
+
+ phy2: phy at 1f22a000 {
+ compatible = "apm,xgene-phy";
+ reg = <0x0 0x1f22a000 0x0 0x100>;
+ #phy-cells = <1>;
+ clocks = <&sataphy2clk 0>;
+ status = "ok";
+ apm,tx-boost-gain = <30 30 30 30 30 30>;
+ apm,tx-eye-tuning = <1 10 10 2 10 10>;
+ };
+
+ phy3: phy at 1f23a000 {
+ compatible = "apm,xgene-phy";
+ reg = <0x0 0x1f23a000 0x0 0x100>;
+ #phy-cells = <1>;
+ clocks = <&sataphy3clk 0>;
+ status = "ok";
+ apm,tx-boost-gain = <31 31 31 31 31 31>;
+ apm,tx-eye-tuning = <2 10 10 2 10 10>;
+ };
+
+ sata1: sata at 1a000000 {
+ compatible = "apm,xgene-ahci";
+ reg = <0x0 0x1a000000 0x0 0x1000>,
+ <0x0 0x1f210000 0x0 0x1000>,
+ <0x0 0x1f21d000 0x0 0x1000>,
+ <0x0 0x1f21e000 0x0 0x1000>,
+ <0x0 0x1f217000 0x0 0x1000>;
+ interrupts = <0x0 0x86 0x4>;
+ dma-coherent;
+ status = "disabled";
+ clocks = <&sata01clk 0>;
+ phys = <&phy1 0>;
+ phy-names = "sata-phy";
+ };
+
+ sata2: sata at 1a400000 {
+ compatible = "apm,xgene-ahci";
+ reg = <0x0 0x1a400000 0x0 0x1000>,
+ <0x0 0x1f220000 0x0 0x1000>,
+ <0x0 0x1f22d000 0x0 0x1000>,
+ <0x0 0x1f22e000 0x0 0x1000>,
+ <0x0 0x1f227000 0x0 0x1000>;
+ interrupts = <0x0 0x87 0x4>;
+ dma-coherent;
+ status = "ok";
+ clocks = <&sata23clk 0>;
+ phys = <&phy2 0>;
+ phy-names = "sata-phy";
+ };
+
+ sata3: sata at 1a800000 {
+ compatible = "apm,xgene-ahci";
+ reg = <0x0 0x1a800000 0x0 0x1000>,
+ <0x0 0x1f230000 0x0 0x1000>,
+ <0x0 0x1f23d000 0x0 0x1000>,
+ <0x0 0x1f23e000 0x0 0x1000>;
+ interrupts = <0x0 0x88 0x4>;
+ dma-coherent;
+ status = "ok";
+ clocks = <&sata45clk 0>;
+ phys = <&phy3 0>;
+ phy-names = "sata-phy";
+ };
+
+ rtc: rtc at 10510000 {
+ compatible = "apm,xgene-rtc";
+ reg = <0x0 0x10510000 0x0 0x400>;
+ interrupts = <0x0 0x46 0x4>;
+ #clock-cells = <1>;
+ clocks = <&rtcclk 0>;
+ };
+
+ menet: ethernet at 17020000 {
+ compatible = "apm,xgene-enet";
+ status = "disabled";
+ reg = <0x0 0x17020000 0x0 0xd100>,
+ <0x0 0X17030000 0x0 0X400>,
+ <0x0 0X10000000 0x0 0X200>;
+ reg-names = "enet_csr", "ring_csr", "ring_cmd";
+ interrupts = <0x0 0x3c 0x4>;
+ dma-coherent;
+ clocks = <&menetclk 0>;
+ local-mac-address = [00 01 73 00 00 01];
+ phy-connection-type = "rgmii";
+ phy-handle = <&menetphy>;
+ mdio {
+ compatible = "apm,xgene-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ menetphy: menetphy at 3 {
+ compatible = "ethernet-phy-id001c.c915";
+ reg = <0x3>;
+ };
+
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile
new file mode 100644
index 000000000000..43d1404bb3c1
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/Makefile
@@ -0,0 +1,6 @@
+dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dts b/arch/arm64/boot/dts/arm/foundation-v8.dts
new file mode 100644
index 000000000000..4a060906809d
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/foundation-v8.dts
@@ -0,0 +1,232 @@
+/*
+ * ARM Ltd.
+ *
+ * ARMv8 Foundation model DTS
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x80000000 0x00010000;
+
+/ {
+ model = "Foundation-v8A";
+ compatible = "arm,foundation-aarch64", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen { };
+
+ aliases {
+ serial0 = &v2m_serial0;
+ serial1 = &v2m_serial1;
+ serial2 = &v2m_serial2;
+ serial3 = &v2m_serial3;
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x0>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ };
+ cpu at 1 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x1>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ };
+ cpu at 2 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x2>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ };
+ cpu at 3 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x3>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ };
+ };
+
+ memory at 80000000 {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000 0 0x80000000>,
+ <0x00000008 0x80000000 0 0x80000000>;
+ };
+
+ gic: interrupt-controller at 2c001000 {
+ compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x0 0x2c001000 0 0x1000>,
+ <0x0 0x2c002000 0 0x1000>,
+ <0x0 0x2c004000 0 0x2000>,
+ <0x0 0x2c006000 0 0x2000>;
+ interrupts = <1 9 0xf04>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 13 0xff01>,
+ <1 14 0xff01>,
+ <1 11 0xff01>,
+ <1 10 0xff01>;
+ clock-frequency = <100000000>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <0 60 4>,
+ <0 61 4>,
+ <0 62 4>,
+ <0 63 4>;
+ };
+
+ smb {
+ compatible = "arm,vexpress,v2m-p1", "simple-bus";
+ arm,v2m-memory-map = "rs1";
+ #address-cells = <2>; /* SMB chipselect number and offset */
+ #size-cells = <1>;
+
+ ranges = <0 0 0 0x08000000 0x04000000>,
+ <1 0 0 0x14000000 0x04000000>,
+ <2 0 0 0x18000000 0x04000000>,
+ <3 0 0 0x1c000000 0x04000000>,
+ <4 0 0 0x0c000000 0x04000000>,
+ <5 0 0 0x10000000 0x04000000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 63>;
+ interrupt-map = <0 0 0 &gic 0 0 4>,
+ <0 0 1 &gic 0 1 4>,
+ <0 0 2 &gic 0 2 4>,
+ <0 0 3 &gic 0 3 4>,
+ <0 0 4 &gic 0 4 4>,
+ <0 0 5 &gic 0 5 4>,
+ <0 0 6 &gic 0 6 4>,
+ <0 0 7 &gic 0 7 4>,
+ <0 0 8 &gic 0 8 4>,
+ <0 0 9 &gic 0 9 4>,
+ <0 0 10 &gic 0 10 4>,
+ <0 0 11 &gic 0 11 4>,
+ <0 0 12 &gic 0 12 4>,
+ <0 0 13 &gic 0 13 4>,
+ <0 0 14 &gic 0 14 4>,
+ <0 0 15 &gic 0 15 4>,
+ <0 0 16 &gic 0 16 4>,
+ <0 0 17 &gic 0 17 4>,
+ <0 0 18 &gic 0 18 4>,
+ <0 0 19 &gic 0 19 4>,
+ <0 0 20 &gic 0 20 4>,
+ <0 0 21 &gic 0 21 4>,
+ <0 0 22 &gic 0 22 4>,
+ <0 0 23 &gic 0 23 4>,
+ <0 0 24 &gic 0 24 4>,
+ <0 0 25 &gic 0 25 4>,
+ <0 0 26 &gic 0 26 4>,
+ <0 0 27 &gic 0 27 4>,
+ <0 0 28 &gic 0 28 4>,
+ <0 0 29 &gic 0 29 4>,
+ <0 0 30 &gic 0 30 4>,
+ <0 0 31 &gic 0 31 4>,
+ <0 0 32 &gic 0 32 4>,
+ <0 0 33 &gic 0 33 4>,
+ <0 0 34 &gic 0 34 4>,
+ <0 0 35 &gic 0 35 4>,
+ <0 0 36 &gic 0 36 4>,
+ <0 0 37 &gic 0 37 4>,
+ <0 0 38 &gic 0 38 4>,
+ <0 0 39 &gic 0 39 4>,
+ <0 0 40 &gic 0 40 4>,
+ <0 0 41 &gic 0 41 4>,
+ <0 0 42 &gic 0 42 4>;
+
+ ethernet at 2,02000000 {
+ compatible = "smsc,lan91c111";
+ reg = <2 0x02000000 0x10000>;
+ interrupts = <15>;
+ };
+
+ v2m_clk24mhz: clk24mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "v2m:clk24mhz";
+ };
+
+ v2m_refclk1mhz: refclk1mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000>;
+ clock-output-names = "v2m:refclk1mhz";
+ };
+
+ v2m_refclk32khz: refclk32khz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "v2m:refclk32khz";
+ };
+
+ iofpga at 3,00000000 {
+ compatible = "arm,amba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 3 0 0x200000>;
+
+ v2m_sysreg: sysreg at 010000 {
+ compatible = "arm,vexpress-sysreg";
+ reg = <0x010000 0x1000>;
+ };
+
+ v2m_serial0: uart at 090000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x090000 0x1000>;
+ interrupts = <5>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ v2m_serial1: uart at 0a0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0a0000 0x1000>;
+ interrupts = <6>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ v2m_serial2: uart at 0b0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0b0000 0x1000>;
+ interrupts = <7>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ v2m_serial3: uart at 0c0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0c0000 0x1000>;
+ interrupts = <8>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ virtio_block at 0130000 {
+ compatible = "virtio,mmio";
+ reg = <0x130000 0x200>;
+ interrupts = <42>;
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
new file mode 100644
index 000000000000..572005ea2217
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
@@ -0,0 +1,159 @@
+/*
+ * ARM Ltd. Fast Models
+ *
+ * Architecture Envelope Model (AEM) ARMv8-A
+ * ARMAEMv8AMPCT
+ *
+ * RTSM_VE_AEMv8A.lisa
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x80000000 0x00010000;
+
+/ {
+ model = "RTSM_VE_AEMv8A";
+ compatible = "arm,rtsm_ve,aemv8a", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen { };
+
+ aliases {
+ serial0 = &v2m_serial0;
+ serial1 = &v2m_serial1;
+ serial2 = &v2m_serial2;
+ serial3 = &v2m_serial3;
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x0>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ };
+ cpu at 1 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x1>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ };
+ cpu at 2 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x2>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ };
+ cpu at 3 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x3>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ };
+ };
+
+ memory at 80000000 {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000 0 0x80000000>,
+ <0x00000008 0x80000000 0 0x80000000>;
+ };
+
+ gic: interrupt-controller at 2c001000 {
+ compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x0 0x2c001000 0 0x1000>,
+ <0x0 0x2c002000 0 0x1000>,
+ <0x0 0x2c004000 0 0x2000>,
+ <0x0 0x2c006000 0 0x2000>;
+ interrupts = <1 9 0xf04>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 13 0xff01>,
+ <1 14 0xff01>,
+ <1 11 0xff01>,
+ <1 10 0xff01>;
+ clock-frequency = <100000000>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <0 60 4>,
+ <0 61 4>,
+ <0 62 4>,
+ <0 63 4>;
+ };
+
+ smb {
+ compatible = "simple-bus";
+
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x08000000 0x04000000>,
+ <1 0 0 0x14000000 0x04000000>,
+ <2 0 0 0x18000000 0x04000000>,
+ <3 0 0 0x1c000000 0x04000000>,
+ <4 0 0 0x0c000000 0x04000000>,
+ <5 0 0 0x10000000 0x04000000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 63>;
+ interrupt-map = <0 0 0 &gic 0 0 4>,
+ <0 0 1 &gic 0 1 4>,
+ <0 0 2 &gic 0 2 4>,
+ <0 0 3 &gic 0 3 4>,
+ <0 0 4 &gic 0 4 4>,
+ <0 0 5 &gic 0 5 4>,
+ <0 0 6 &gic 0 6 4>,
+ <0 0 7 &gic 0 7 4>,
+ <0 0 8 &gic 0 8 4>,
+ <0 0 9 &gic 0 9 4>,
+ <0 0 10 &gic 0 10 4>,
+ <0 0 11 &gic 0 11 4>,
+ <0 0 12 &gic 0 12 4>,
+ <0 0 13 &gic 0 13 4>,
+ <0 0 14 &gic 0 14 4>,
+ <0 0 15 &gic 0 15 4>,
+ <0 0 16 &gic 0 16 4>,
+ <0 0 17 &gic 0 17 4>,
+ <0 0 18 &gic 0 18 4>,
+ <0 0 19 &gic 0 19 4>,
+ <0 0 20 &gic 0 20 4>,
+ <0 0 21 &gic 0 21 4>,
+ <0 0 22 &gic 0 22 4>,
+ <0 0 23 &gic 0 23 4>,
+ <0 0 24 &gic 0 24 4>,
+ <0 0 25 &gic 0 25 4>,
+ <0 0 26 &gic 0 26 4>,
+ <0 0 27 &gic 0 27 4>,
+ <0 0 28 &gic 0 28 4>,
+ <0 0 29 &gic 0 29 4>,
+ <0 0 30 &gic 0 30 4>,
+ <0 0 31 &gic 0 31 4>,
+ <0 0 32 &gic 0 32 4>,
+ <0 0 33 &gic 0 33 4>,
+ <0 0 34 &gic 0 34 4>,
+ <0 0 35 &gic 0 35 4>,
+ <0 0 36 &gic 0 36 4>,
+ <0 0 37 &gic 0 37 4>,
+ <0 0 38 &gic 0 38 4>,
+ <0 0 39 &gic 0 39 4>,
+ <0 0 40 &gic 0 40 4>,
+ <0 0 41 &gic 0 41 4>,
+ <0 0 42 &gic 0 42 4>;
+
+ /include/ "rtsm_ve-motherboard.dtsi"
+ };
+};
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
new file mode 100644
index 000000000000..ac2cb2418025
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
@@ -0,0 +1,240 @@
+/*
+ * ARM Ltd. Fast Models
+ *
+ * Versatile Express (VE) system model
+ * Motherboard component
+ *
+ * VEMotherBoard.lisa
+ */
+
+ motherboard {
+ arm,v2m-memory-map = "rs1";
+ compatible = "arm,vexpress,v2m-p1", "simple-bus";
+ #address-cells = <2>; /* SMB chipselect number and offset */
+ #size-cells = <1>;
+ #interrupt-cells = <1>;
+ ranges;
+
+ flash at 0,00000000 {
+ compatible = "arm,vexpress-flash", "cfi-flash";
+ reg = <0 0x00000000 0x04000000>,
+ <4 0x00000000 0x04000000>;
+ bank-width = <4>;
+ };
+
+ vram at 2,00000000 {
+ compatible = "arm,vexpress-vram";
+ reg = <2 0x00000000 0x00800000>;
+ };
+
+ ethernet at 2,02000000 {
+ compatible = "smsc,lan91c111";
+ reg = <2 0x02000000 0x10000>;
+ interrupts = <15>;
+ };
+
+ v2m_clk24mhz: clk24mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "v2m:clk24mhz";
+ };
+
+ v2m_refclk1mhz: refclk1mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000>;
+ clock-output-names = "v2m:refclk1mhz";
+ };
+
+ v2m_refclk32khz: refclk32khz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "v2m:refclk32khz";
+ };
+
+ iofpga at 3,00000000 {
+ compatible = "arm,amba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 3 0 0x200000>;
+
+ v2m_sysreg: sysreg at 010000 {
+ compatible = "arm,vexpress-sysreg";
+ reg = <0x010000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ v2m_sysctl: sysctl at 020000 {
+ compatible = "arm,sp810", "arm,primecell";
+ reg = <0x020000 0x1000>;
+ clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>;
+ clock-names = "refclk", "timclk", "apb_pclk";
+ #clock-cells = <1>;
+ clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+ };
+
+ aaci at 040000 {
+ compatible = "arm,pl041", "arm,primecell";
+ reg = <0x040000 0x1000>;
+ interrupts = <11>;
+ clocks = <&v2m_clk24mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ mmci at 050000 {
+ compatible = "arm,pl180", "arm,primecell";
+ reg = <0x050000 0x1000>;
+ interrupts = <9 10>;
+ cd-gpios = <&v2m_sysreg 0 0>;
+ wp-gpios = <&v2m_sysreg 1 0>;
+ max-frequency = <12000000>;
+ vmmc-supply = <&v2m_fixed_3v3>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "mclk", "apb_pclk";
+ };
+
+ kmi at 060000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x060000 0x1000>;
+ interrupts = <12>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ kmi at 070000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x070000 0x1000>;
+ interrupts = <13>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ v2m_serial0: uart at 090000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x090000 0x1000>;
+ interrupts = <5>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ v2m_serial1: uart at 0a0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0a0000 0x1000>;
+ interrupts = <6>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ v2m_serial2: uart at 0b0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0b0000 0x1000>;
+ interrupts = <7>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ v2m_serial3: uart at 0c0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0c0000 0x1000>;
+ interrupts = <8>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ wdt at 0f0000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x0f0000 0x1000>;
+ interrupts = <0>;
+ clocks = <&v2m_refclk32khz>, <&v2m_clk24mhz>;
+ clock-names = "wdogclk", "apb_pclk";
+ };
+
+ v2m_timer01: timer at 110000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x110000 0x1000>;
+ interrupts = <2>;
+ clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_clk24mhz>;
+ clock-names = "timclken1", "timclken2", "apb_pclk";
+ };
+
+ v2m_timer23: timer at 120000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x120000 0x1000>;
+ interrupts = <3>;
+ clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&v2m_clk24mhz>;
+ clock-names = "timclken1", "timclken2", "apb_pclk";
+ };
+
+ rtc at 170000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0x170000 0x1000>;
+ interrupts = <4>;
+ clocks = <&v2m_clk24mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ clcd at 1f0000 {
+ compatible = "arm,pl111", "arm,primecell";
+ reg = <0x1f0000 0x1000>;
+ interrupts = <14>;
+ clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>;
+ clock-names = "clcdclk", "apb_pclk";
+ };
+
+ virtio_block at 0130000 {
+ compatible = "virtio,mmio";
+ reg = <0x130000 0x200>;
+ interrupts = <42>;
+ };
+ };
+
+ v2m_fixed_3v3: fixedregulator at 0 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ mcc {
+ compatible = "arm,vexpress,config-bus";
+ arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+ v2m_oscclk1: osc at 1 {
+ /* CLCD clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 1>;
+ freq-range = <23750000 63500000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk1";
+ };
+
+ reset at 0 {
+ compatible = "arm,vexpress-reset";
+ arm,vexpress-sysreg,func = <5 0>;
+ };
+
+ muxfpga at 0 {
+ compatible = "arm,vexpress-muxfpga";
+ arm,vexpress-sysreg,func = <7 0>;
+ };
+
+ shutdown at 0 {
+ compatible = "arm,vexpress-shutdown";
+ arm,vexpress-sysreg,func = <8 0>;
+ };
+
+ reboot at 0 {
+ compatible = "arm,vexpress-reboot";
+ arm,vexpress-sysreg,func = <9 0>;
+ };
+
+ dvimode at 0 {
+ compatible = "arm,vexpress-dvimode";
+ arm,vexpress-sysreg,func = <11 0>;
+ };
+ };
+ };
diff --git a/arch/arm64/boot/dts/foundation-v8.dts b/arch/arm64/boot/dts/foundation-v8.dts
deleted file mode 100644
index 4a060906809d..000000000000
--- a/arch/arm64/boot/dts/foundation-v8.dts
+++ /dev/null
@@ -1,232 +0,0 @@
-/*
- * ARM Ltd.
- *
- * ARMv8 Foundation model DTS
- */
-
-/dts-v1/;
-
-/memreserve/ 0x80000000 0x00010000;
-
-/ {
- model = "Foundation-v8A";
- compatible = "arm,foundation-aarch64", "arm,vexpress";
- interrupt-parent = <&gic>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- chosen { };
-
- aliases {
- serial0 = &v2m_serial0;
- serial1 = &v2m_serial1;
- serial2 = &v2m_serial2;
- serial3 = &v2m_serial3;
- };
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- cpu at 0 {
- device_type = "cpu";
- compatible = "arm,armv8";
- reg = <0x0 0x0>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x8000fff8>;
- };
- cpu at 1 {
- device_type = "cpu";
- compatible = "arm,armv8";
- reg = <0x0 0x1>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x8000fff8>;
- };
- cpu at 2 {
- device_type = "cpu";
- compatible = "arm,armv8";
- reg = <0x0 0x2>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x8000fff8>;
- };
- cpu at 3 {
- device_type = "cpu";
- compatible = "arm,armv8";
- reg = <0x0 0x3>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x8000fff8>;
- };
- };
-
- memory at 80000000 {
- device_type = "memory";
- reg = <0x00000000 0x80000000 0 0x80000000>,
- <0x00000008 0x80000000 0 0x80000000>;
- };
-
- gic: interrupt-controller at 2c001000 {
- compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- #address-cells = <0>;
- interrupt-controller;
- reg = <0x0 0x2c001000 0 0x1000>,
- <0x0 0x2c002000 0 0x1000>,
- <0x0 0x2c004000 0 0x2000>,
- <0x0 0x2c006000 0 0x2000>;
- interrupts = <1 9 0xf04>;
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <1 13 0xff01>,
- <1 14 0xff01>,
- <1 11 0xff01>,
- <1 10 0xff01>;
- clock-frequency = <100000000>;
- };
-
- pmu {
- compatible = "arm,armv8-pmuv3";
- interrupts = <0 60 4>,
- <0 61 4>,
- <0 62 4>,
- <0 63 4>;
- };
-
- smb {
- compatible = "arm,vexpress,v2m-p1", "simple-bus";
- arm,v2m-memory-map = "rs1";
- #address-cells = <2>; /* SMB chipselect number and offset */
- #size-cells = <1>;
-
- ranges = <0 0 0 0x08000000 0x04000000>,
- <1 0 0 0x14000000 0x04000000>,
- <2 0 0 0x18000000 0x04000000>,
- <3 0 0 0x1c000000 0x04000000>,
- <4 0 0 0x0c000000 0x04000000>,
- <5 0 0 0x10000000 0x04000000>;
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 63>;
- interrupt-map = <0 0 0 &gic 0 0 4>,
- <0 0 1 &gic 0 1 4>,
- <0 0 2 &gic 0 2 4>,
- <0 0 3 &gic 0 3 4>,
- <0 0 4 &gic 0 4 4>,
- <0 0 5 &gic 0 5 4>,
- <0 0 6 &gic 0 6 4>,
- <0 0 7 &gic 0 7 4>,
- <0 0 8 &gic 0 8 4>,
- <0 0 9 &gic 0 9 4>,
- <0 0 10 &gic 0 10 4>,
- <0 0 11 &gic 0 11 4>,
- <0 0 12 &gic 0 12 4>,
- <0 0 13 &gic 0 13 4>,
- <0 0 14 &gic 0 14 4>,
- <0 0 15 &gic 0 15 4>,
- <0 0 16 &gic 0 16 4>,
- <0 0 17 &gic 0 17 4>,
- <0 0 18 &gic 0 18 4>,
- <0 0 19 &gic 0 19 4>,
- <0 0 20 &gic 0 20 4>,
- <0 0 21 &gic 0 21 4>,
- <0 0 22 &gic 0 22 4>,
- <0 0 23 &gic 0 23 4>,
- <0 0 24 &gic 0 24 4>,
- <0 0 25 &gic 0 25 4>,
- <0 0 26 &gic 0 26 4>,
- <0 0 27 &gic 0 27 4>,
- <0 0 28 &gic 0 28 4>,
- <0 0 29 &gic 0 29 4>,
- <0 0 30 &gic 0 30 4>,
- <0 0 31 &gic 0 31 4>,
- <0 0 32 &gic 0 32 4>,
- <0 0 33 &gic 0 33 4>,
- <0 0 34 &gic 0 34 4>,
- <0 0 35 &gic 0 35 4>,
- <0 0 36 &gic 0 36 4>,
- <0 0 37 &gic 0 37 4>,
- <0 0 38 &gic 0 38 4>,
- <0 0 39 &gic 0 39 4>,
- <0 0 40 &gic 0 40 4>,
- <0 0 41 &gic 0 41 4>,
- <0 0 42 &gic 0 42 4>;
-
- ethernet at 2,02000000 {
- compatible = "smsc,lan91c111";
- reg = <2 0x02000000 0x10000>;
- interrupts = <15>;
- };
-
- v2m_clk24mhz: clk24mhz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24000000>;
- clock-output-names = "v2m:clk24mhz";
- };
-
- v2m_refclk1mhz: refclk1mhz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <1000000>;
- clock-output-names = "v2m:refclk1mhz";
- };
-
- v2m_refclk32khz: refclk32khz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-output-names = "v2m:refclk32khz";
- };
-
- iofpga at 3,00000000 {
- compatible = "arm,amba-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 3 0 0x200000>;
-
- v2m_sysreg: sysreg at 010000 {
- compatible = "arm,vexpress-sysreg";
- reg = <0x010000 0x1000>;
- };
-
- v2m_serial0: uart at 090000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x090000 0x1000>;
- interrupts = <5>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- v2m_serial1: uart at 0a0000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0a0000 0x1000>;
- interrupts = <6>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- v2m_serial2: uart at 0b0000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0b0000 0x1000>;
- interrupts = <7>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- v2m_serial3: uart at 0c0000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0c0000 0x1000>;
- interrupts = <8>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- virtio_block at 0130000 {
- compatible = "virtio,mmio";
- reg = <0x130000 0x200>;
- interrupts = <42>;
- };
- };
- };
-};
diff --git a/arch/arm64/boot/dts/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/rtsm_ve-aemv8a.dts
deleted file mode 100644
index 572005ea2217..000000000000
--- a/arch/arm64/boot/dts/rtsm_ve-aemv8a.dts
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * ARM Ltd. Fast Models
- *
- * Architecture Envelope Model (AEM) ARMv8-A
- * ARMAEMv8AMPCT
- *
- * RTSM_VE_AEMv8A.lisa
- */
-
-/dts-v1/;
-
-/memreserve/ 0x80000000 0x00010000;
-
-/ {
- model = "RTSM_VE_AEMv8A";
- compatible = "arm,rtsm_ve,aemv8a", "arm,vexpress";
- interrupt-parent = <&gic>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- chosen { };
-
- aliases {
- serial0 = &v2m_serial0;
- serial1 = &v2m_serial1;
- serial2 = &v2m_serial2;
- serial3 = &v2m_serial3;
- };
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- cpu at 0 {
- device_type = "cpu";
- compatible = "arm,armv8";
- reg = <0x0 0x0>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x8000fff8>;
- };
- cpu at 1 {
- device_type = "cpu";
- compatible = "arm,armv8";
- reg = <0x0 0x1>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x8000fff8>;
- };
- cpu at 2 {
- device_type = "cpu";
- compatible = "arm,armv8";
- reg = <0x0 0x2>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x8000fff8>;
- };
- cpu at 3 {
- device_type = "cpu";
- compatible = "arm,armv8";
- reg = <0x0 0x3>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x8000fff8>;
- };
- };
-
- memory at 80000000 {
- device_type = "memory";
- reg = <0x00000000 0x80000000 0 0x80000000>,
- <0x00000008 0x80000000 0 0x80000000>;
- };
-
- gic: interrupt-controller at 2c001000 {
- compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- #address-cells = <0>;
- interrupt-controller;
- reg = <0x0 0x2c001000 0 0x1000>,
- <0x0 0x2c002000 0 0x1000>,
- <0x0 0x2c004000 0 0x2000>,
- <0x0 0x2c006000 0 0x2000>;
- interrupts = <1 9 0xf04>;
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <1 13 0xff01>,
- <1 14 0xff01>,
- <1 11 0xff01>,
- <1 10 0xff01>;
- clock-frequency = <100000000>;
- };
-
- pmu {
- compatible = "arm,armv8-pmuv3";
- interrupts = <0 60 4>,
- <0 61 4>,
- <0 62 4>,
- <0 63 4>;
- };
-
- smb {
- compatible = "simple-bus";
-
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0 0x08000000 0x04000000>,
- <1 0 0 0x14000000 0x04000000>,
- <2 0 0 0x18000000 0x04000000>,
- <3 0 0 0x1c000000 0x04000000>,
- <4 0 0 0x0c000000 0x04000000>,
- <5 0 0 0x10000000 0x04000000>;
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 63>;
- interrupt-map = <0 0 0 &gic 0 0 4>,
- <0 0 1 &gic 0 1 4>,
- <0 0 2 &gic 0 2 4>,
- <0 0 3 &gic 0 3 4>,
- <0 0 4 &gic 0 4 4>,
- <0 0 5 &gic 0 5 4>,
- <0 0 6 &gic 0 6 4>,
- <0 0 7 &gic 0 7 4>,
- <0 0 8 &gic 0 8 4>,
- <0 0 9 &gic 0 9 4>,
- <0 0 10 &gic 0 10 4>,
- <0 0 11 &gic 0 11 4>,
- <0 0 12 &gic 0 12 4>,
- <0 0 13 &gic 0 13 4>,
- <0 0 14 &gic 0 14 4>,
- <0 0 15 &gic 0 15 4>,
- <0 0 16 &gic 0 16 4>,
- <0 0 17 &gic 0 17 4>,
- <0 0 18 &gic 0 18 4>,
- <0 0 19 &gic 0 19 4>,
- <0 0 20 &gic 0 20 4>,
- <0 0 21 &gic 0 21 4>,
- <0 0 22 &gic 0 22 4>,
- <0 0 23 &gic 0 23 4>,
- <0 0 24 &gic 0 24 4>,
- <0 0 25 &gic 0 25 4>,
- <0 0 26 &gic 0 26 4>,
- <0 0 27 &gic 0 27 4>,
- <0 0 28 &gic 0 28 4>,
- <0 0 29 &gic 0 29 4>,
- <0 0 30 &gic 0 30 4>,
- <0 0 31 &gic 0 31 4>,
- <0 0 32 &gic 0 32 4>,
- <0 0 33 &gic 0 33 4>,
- <0 0 34 &gic 0 34 4>,
- <0 0 35 &gic 0 35 4>,
- <0 0 36 &gic 0 36 4>,
- <0 0 37 &gic 0 37 4>,
- <0 0 38 &gic 0 38 4>,
- <0 0 39 &gic 0 39 4>,
- <0 0 40 &gic 0 40 4>,
- <0 0 41 &gic 0 41 4>,
- <0 0 42 &gic 0 42 4>;
-
- /include/ "rtsm_ve-motherboard.dtsi"
- };
-};
diff --git a/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi
deleted file mode 100644
index ac2cb2418025..000000000000
--- a/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi
+++ /dev/null
@@ -1,240 +0,0 @@
-/*
- * ARM Ltd. Fast Models
- *
- * Versatile Express (VE) system model
- * Motherboard component
- *
- * VEMotherBoard.lisa
- */
-
- motherboard {
- arm,v2m-memory-map = "rs1";
- compatible = "arm,vexpress,v2m-p1", "simple-bus";
- #address-cells = <2>; /* SMB chipselect number and offset */
- #size-cells = <1>;
- #interrupt-cells = <1>;
- ranges;
-
- flash at 0,00000000 {
- compatible = "arm,vexpress-flash", "cfi-flash";
- reg = <0 0x00000000 0x04000000>,
- <4 0x00000000 0x04000000>;
- bank-width = <4>;
- };
-
- vram at 2,00000000 {
- compatible = "arm,vexpress-vram";
- reg = <2 0x00000000 0x00800000>;
- };
-
- ethernet at 2,02000000 {
- compatible = "smsc,lan91c111";
- reg = <2 0x02000000 0x10000>;
- interrupts = <15>;
- };
-
- v2m_clk24mhz: clk24mhz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24000000>;
- clock-output-names = "v2m:clk24mhz";
- };
-
- v2m_refclk1mhz: refclk1mhz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <1000000>;
- clock-output-names = "v2m:refclk1mhz";
- };
-
- v2m_refclk32khz: refclk32khz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-output-names = "v2m:refclk32khz";
- };
-
- iofpga at 3,00000000 {
- compatible = "arm,amba-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 3 0 0x200000>;
-
- v2m_sysreg: sysreg at 010000 {
- compatible = "arm,vexpress-sysreg";
- reg = <0x010000 0x1000>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- v2m_sysctl: sysctl at 020000 {
- compatible = "arm,sp810", "arm,primecell";
- reg = <0x020000 0x1000>;
- clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>;
- clock-names = "refclk", "timclk", "apb_pclk";
- #clock-cells = <1>;
- clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
- };
-
- aaci at 040000 {
- compatible = "arm,pl041", "arm,primecell";
- reg = <0x040000 0x1000>;
- interrupts = <11>;
- clocks = <&v2m_clk24mhz>;
- clock-names = "apb_pclk";
- };
-
- mmci at 050000 {
- compatible = "arm,pl180", "arm,primecell";
- reg = <0x050000 0x1000>;
- interrupts = <9 10>;
- cd-gpios = <&v2m_sysreg 0 0>;
- wp-gpios = <&v2m_sysreg 1 0>;
- max-frequency = <12000000>;
- vmmc-supply = <&v2m_fixed_3v3>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "mclk", "apb_pclk";
- };
-
- kmi at 060000 {
- compatible = "arm,pl050", "arm,primecell";
- reg = <0x060000 0x1000>;
- interrupts = <12>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "KMIREFCLK", "apb_pclk";
- };
-
- kmi at 070000 {
- compatible = "arm,pl050", "arm,primecell";
- reg = <0x070000 0x1000>;
- interrupts = <13>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "KMIREFCLK", "apb_pclk";
- };
-
- v2m_serial0: uart at 090000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x090000 0x1000>;
- interrupts = <5>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- v2m_serial1: uart at 0a0000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0a0000 0x1000>;
- interrupts = <6>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- v2m_serial2: uart at 0b0000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0b0000 0x1000>;
- interrupts = <7>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- v2m_serial3: uart at 0c0000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0c0000 0x1000>;
- interrupts = <8>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- wdt at 0f0000 {
- compatible = "arm,sp805", "arm,primecell";
- reg = <0x0f0000 0x1000>;
- interrupts = <0>;
- clocks = <&v2m_refclk32khz>, <&v2m_clk24mhz>;
- clock-names = "wdogclk", "apb_pclk";
- };
-
- v2m_timer01: timer at 110000 {
- compatible = "arm,sp804", "arm,primecell";
- reg = <0x110000 0x1000>;
- interrupts = <2>;
- clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_clk24mhz>;
- clock-names = "timclken1", "timclken2", "apb_pclk";
- };
-
- v2m_timer23: timer at 120000 {
- compatible = "arm,sp804", "arm,primecell";
- reg = <0x120000 0x1000>;
- interrupts = <3>;
- clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&v2m_clk24mhz>;
- clock-names = "timclken1", "timclken2", "apb_pclk";
- };
-
- rtc at 170000 {
- compatible = "arm,pl031", "arm,primecell";
- reg = <0x170000 0x1000>;
- interrupts = <4>;
- clocks = <&v2m_clk24mhz>;
- clock-names = "apb_pclk";
- };
-
- clcd at 1f0000 {
- compatible = "arm,pl111", "arm,primecell";
- reg = <0x1f0000 0x1000>;
- interrupts = <14>;
- clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>;
- clock-names = "clcdclk", "apb_pclk";
- };
-
- virtio_block at 0130000 {
- compatible = "virtio,mmio";
- reg = <0x130000 0x200>;
- interrupts = <42>;
- };
- };
-
- v2m_fixed_3v3: fixedregulator at 0 {
- compatible = "regulator-fixed";
- regulator-name = "3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- mcc {
- compatible = "arm,vexpress,config-bus";
- arm,vexpress,config-bridge = <&v2m_sysreg>;
-
- v2m_oscclk1: osc at 1 {
- /* CLCD clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 1>;
- freq-range = <23750000 63500000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk1";
- };
-
- reset at 0 {
- compatible = "arm,vexpress-reset";
- arm,vexpress-sysreg,func = <5 0>;
- };
-
- muxfpga at 0 {
- compatible = "arm,vexpress-muxfpga";
- arm,vexpress-sysreg,func = <7 0>;
- };
-
- shutdown at 0 {
- compatible = "arm,vexpress-shutdown";
- arm,vexpress-sysreg,func = <8 0>;
- };
-
- reboot at 0 {
- compatible = "arm,vexpress-reboot";
- arm,vexpress-sysreg,func = <9 0>;
- };
-
- dvimode at 0 {
- compatible = "arm,vexpress-dvimode";
- arm,vexpress-sysreg,func = <11 0>;
- };
- };
- };
--
2.0.1
More information about the linux-arm-kernel
mailing list