[PATCH 1/1] ARM: exynos_defconfig: Enable options for display panel support
ajaynumb at gmail.com
Thu Sep 4 23:35:03 PDT 2014
On Wed, Sep 3, 2014 at 9:56 PM, Kukjin Kim <kgene.kim at samsung.com> wrote:
> Javier Martinez Canillas wrote:
>> Many Exynos devices have a display panel, most of them just have
>> a simple panel while others have more complex configurations that
>> requires an embedded DisplayPort (eDP) to LVDS display bridge.
>> This patch enables the following features to support both setups:
>> - Direct Rendering Manager (DRM)
>> - DRM bridge registration and lookup framework
>> - Parade ps8622/ps8625 eDP/LVDS bridge
>> - NXP ptn3460 eDP/LVDS bridge
>> - Exynos Fully Interactive Mobile Display controller (FIMD)
>> - Panel registration and lookup framework
>> - Simple panels
>> - Backlight and LCD device support
> Thanks a lot.
>> Signed-off-by: Javier Martinez Canillas <javier.martinez at collabora.co.uk>
>> Some of the options enabled here (e.g: the eDP/LVDS bridges)
>> are still not merged in mainline so this patch depends on
>> the following posted patches that were still not merged:
>> "drm/bridge: Modify drm_bridge core to support driver model" 
>> "drm/bridge: Add i2c based driver for ptn3460 bridge" 
>> "drm/bridge: Add i2c based driver for ps8622/ps8625 bridge" 
> BTW, I can't find its re-spin...how was going on?
I already sent this a week back.Find it here:
In this patchset, patch "[PATCH V7 5/12] drm/exynos: dp: support drm_bridge"
introduces following Kconfig error:
drivers/video/fbdev/Kconfig:5:error: recursive dependency detected!
drivers/video/fbdev/Kconfig:5: symbol FB is selected by DRM_KMS_FB_HELPER
drivers/gpu/drm/Kconfig:39: symbol DRM_KMS_FB_HELPER depends on DRM_KMS_HELPER
drivers/gpu/drm/Kconfig:33: symbol DRM_KMS_HELPER is selected by DRM_BRIDGE
drivers/gpu/drm/bridge/Kconfig:1: symbol DRM_BRIDGE is selected by DRM_EXYNOS_DP
drivers/gpu/drm/exynos/Kconfig:53: symbol DRM_EXYNOS_DP depends on
drivers/gpu/drm/exynos/Kconfig:28: symbol DRM_EXYNOS_FIMD depends on FB_S3C
drivers/video/fbdev/Kconfig:2038: symbol FB_S3C depends on FB
How to fix this?
Can we remove dependency between FB_S3C and DRM_EXYNOS_FIMD?
>> But I wanted to post anyways to make easier for others to
>> figure out what are the needed options to have the display
>> working on their Exynos machines.
>> In order to test the display panel on the Peach machines,
>> the following patches are also needed:
>> "ARM: dts: Add DT changes for display on peach_pit" 
>> "ARM: dts: Add DT changes for display on peach_pi" 
> I'll have a look them soon.
The above ones are older versions. Latest ones are here:
Among the above, patch (1) can be merged because corresponding
driver changes are already merged!
> - Kukjin
>> Best regards,
>> : http://patchwork.ozlabs.org/patch/373792/
>> : http://patchwork.ozlabs.org/patch/373793/
>> : http://patchwork.ozlabs.org/patch/373794/
>> : http://www.spinics.net/lists/arm-kernel/msg350568.html
>> : http://www.spinics.net/lists/arm-kernel/msg350569.html
>> arch/arm/configs/exynos_defconfig | 14 ++++++++++++++
>> 1 file changed, 14 insertions(+)
>> diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
>> index 676c744..f69d57e 100644
>> --- a/arch/arm/configs/exynos_defconfig
>> +++ b/arch/arm/configs/exynos_defconfig
>> @@ -101,11 +101,25 @@ CONFIG_REGULATOR_S2MPA01=y
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
More information about the linux-arm-kernel