[PATCH v7 1/2] i2c: imx: add DMA support for freescale i2c driver

[Marek Vasut]

On Wednesday, August 13, 2014 at 11:46:54 AM, Yuan Yao wrote:
> Add dma support for i2c. This function depend on DMA driver.
> You can turn on it by write both the dmas and dma-name properties in dts
> node. DMA is optional, even DMA request unsuccessfully, i2c can also work
> well.
> 
> Signed-off-by: Yuan Yao <yao.yuan at freescale.com>

[...]

> +/* Enable DMA if transfer byte size is bigger than this threshold.
> + * As the hardware request, it must bigger than 4.

The comment is unclear, just by reading it, I have no clue what are the units 
for this value. I can guess those would be bytes, but it would be a good idea
to be explicit.

Also, wasn't kernel comment style starting with leading /* , with the text 
starting only on the next line ?

> + */
> +#define IMX_I2C_DMA_THRESHOLD	16
> +#define IMX_I2C_DMA_TIMEOUT	1000
> +

[...]

> +static int i2c_imx_dma_write(struct imx_i2c_struct *i2c_imx,
> +					struct i2c_msg *msgs)
> +{
> +	int result;
> +	unsigned int temp = 0;
> +	unsigned long orig_jiffies = jiffies;
> +	struct imx_i2c_dma *dma = i2c_imx->dma;
> +	struct device *dev = &i2c_imx->adapter.dev;
> +
> +	dev_dbg(dev, "<%s> write slave address: addr=0x%x\n",
> +		__func__, msgs->addr << 1);
> +
> +	reinit_completion(&i2c_imx->dma->cmd_complete);
> +	dma->chan_using = dma->chan_tx;
> +	dma->dma_transfer_dir = DMA_MEM_TO_DEV;
> +	dma->dma_data_dir = DMA_TO_DEVICE;
> +	dma->dma_len = msgs->len - 1;
> +	result = i2c_imx_dma_xfer(i2c_imx, msgs);
> +	if (result)
> +		return result;
> +
> +	temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
> +	temp |= I2CR_DMAEN;
> +	imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
> +
> +	/*
> +	 * Write slave address.
> +	 * The first byte muse be transmitted by the CPU.
> +	 */
> +	imx_i2c_write_reg(msgs->addr << 1, i2c_imx, IMX_I2C_I2DR);
> +	result = wait_for_completion_interruptible_timeout(
> +				&i2c_imx->dma->cmd_complete,
> +				msecs_to_jiffies(IMX_I2C_DMA_TIMEOUT));
> +	if (result <= 0) {
> +		dmaengine_terminate_all(dma->chan_using);
> +		if (result)
> +			return result;
> +		else
> +			return -ETIMEDOUT;

Shouldn't you force-disable the DMA here somehow (like unsetting I2CR_DMAEN 
bit), if it failed or timed out?

> +	}
> +
> +	/* Waiting for Transfer complete. */
> +	while (1) {
> +		temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
> +		if (temp & I2SR_ICF)
> +			break;
> +		if (time_after(jiffies, orig_jiffies +
> +				msecs_to_jiffies(IMX_I2C_DMA_TIMEOUT))) {
> +			dev_dbg(&i2c_imx->adapter.dev, "<%s> Timeout\n",
> +				__func__);
> +			return -ETIMEDOUT;
> +		}
> +		schedule();
> +	}
> +
> +	temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
> +	temp &= ~I2CR_DMAEN;
> +	imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
> +
> +	/* The last data byte must be transferred by the CPU. */
> +	imx_i2c_write_reg(msgs->buf[msgs->len-1],
> +				i2c_imx, IMX_I2C_I2DR);
> +	result = i2c_imx_trx_complete(i2c_imx);
> +	if (result)
> +		return result;
> +
> +	result = i2c_imx_acked(i2c_imx);
> +	if (result)
> +		return result;
> +
> +	return 0;
> +}
[...]

Thanks!